Paradyne 8785 - Manual
Paradyne 8785 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Hotwire TDM SDSL Termination Units; Hotwire; Installation Overview; Installing the unit in the DSLAM.; Planning the Installation; Review the following list to help plan for the installation.
- Page 3 – Cables You Need; For the network connection:
- Page 4 – Installing TDM SDSL Cards; HANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES; Procedure; Remove the filler plate from the installation slot.
- Page 5 – — For a Hotwire 8800 Series DSLAM – Hold the unit vertically, with the; mating connectors on the backplane.
- Page 6 – Connecting to the DTE; To connect the Hotwire 87xx TDM SDSL Termination Unit to your DTE:; Connect the four terminating connectors to your DTE.; Connecting to an MDF; To connect the Hotwire DSLAM containing the unit to an MDF:; DSLAM; Not Applicable
- Page 7 – Ferrite Choke
- Page 8 – Front Panel LEDs; Type
- Page 10 – Entering Identity Information; Configuring the Unit; Main Menu
- Page 11 – Configuration Edit/Display; ÎÎ
- Page 12 – Copyright
1
Hotwire
r
TDM SDSL Termination Units
Models 8775 and 8785
Installation Instructions
Document Number 8700-A2-GN15-20
February 2001
Product Documentation Online
Complete documentation for this product, including configuration options and cable pin
assignments, is available at www.paradyne.com. Select Library
→
Technical Manuals
→
Hotwire DSL & MVL Systems.
Select the following document:
8700-A2-GB25
Hotwire TDM SDSL Termination Units, Models 8775 and 8785, User’s Guide
For information about the DSLAM or MCC, select from the following documents:
8000-A2-GB22
Hotwire Management Communications Controller (MCC) Card, IP Conservative,
User’s Guide
8000-A2-GB29
Hotwire Management Communications Controller (MCC) Card
User’s Guide
8610-A2-GN10
Hotwire 8610 DSLAM Installation Instructions
8810-A2-GN11
Hotwire 8810 DSLAM Installation Instructions
8820-A2-GN10
Hotwire 8820 GranDSLAM Installation Instructions
To order a paper copy of a Paradyne document:
H
Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)
H
Outside the U.S.A., call 1-727-530-8623
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Hotwire TDM SDSL Termination Units Hotwire r 8775 and 8785 TDM SDSL Termination Units are circuit card assemblies comprising four Time Division Multiplexer Symmetric Digital Subscriber Line(TDM SDSL) ports and four synchronous ports. When the Hotwire 87xx TDM SDSLTermination Unit is used in a Hotw...
3 Cables You Need The following customer-provided cables are used with this product. For the network connection: H Plug-ended 50-position Telco cable for connection from the Hotwire DSLAM to theMain Distribution Frame (MDF) or other demarcation point. For the DTE connection, one of the following: H ...
496-15149 4 Installing TDM SDSL Cards A Hotwire TDM SDSL Termination Unit can be installed, removed, and replaced withoutdisrupting service to other cards in the chassis. ! HANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES This product is designed to protect sensitive components from damage due to e...
