Paradyne 6310 MVLt - Manuals

Page 2 - Hotwire MVL System; or; Network; MVL Access with a Hotwire MVL POTS Filter; Customer

2 Hotwire MVL System Copper pairs run from the central office (CO) to the customer premises (CP) to createthe local loop. The local loop terminates on the customer premises at the demarcationpoint. 98-15930a-02 MVL Modem Customer Premises (CP) MVL/POTS Ethernet Crossover Cable Ethernet Cable or Cent...

Page 3 - Before You Begin; Wiring and Cables You Need

3 NOTES: In this document: — A telephone is used to represent any equipment that plugs into a phone jack and uses the POTS line, such as a phone, modem, or fax machine. — End-user system is used to represent any PC with an Ethernet connection and MVL-based service. — Service provider is used to repr...

Page 4 - Product-Related Documents; To install a phone filter, refer to the appropriate document:; Document Number; Hotwire 6035 MVL Phone Filter Installation Instructions; Installing the Hotwire 6310 MVL Modem; Procedure; Wall Jack; MVL Modem

4 Product-Related Documents To install a phone filter, refer to the appropriate document: Document Number Document Title 6035-A2-GN11 Hotwire 6035 MVL Phone Filter Installation Instructions 6040-A2-GN11 Hotwire 6040 MVL Wall Jack Phone Filter InstallationInstructions Contact your sales or service re...

Page 8 - Status LEDs; LED; ON; Troubleshooting; LED Symptom

8 Status LEDs All of the LEDs turn on and off during the power-on self-test. After a successfulself-test, the LEDs should appear as indicated in BOLD in the Condition column below. LED State Status PWR ON MVL modem has power. ALM OFF ON No active alarms. An alarm condition exists. TST OFF ON No acti...

Page 9 - Check that the power cord is securely installed on both ends.; MVL HomeLink; File sharing

9 LED Symptom Action LINE LED is off. Verify that the MVL LINE cable is securely installed on bothends. If the problem continues, contact the Service Provider. Verify that the line has dial tone. If there is no dial tone, contactthe Service Provider. LINE LED is on andthere is no datatransmission. T...

Page 10 - Office; Family Room; Increasing the Number of End-User Systems; This section is reference information.; Function

98-15304a 6-Pin RJ11 Plugs Pin #1 Pin #6 10 To enable the sharing of resources and review security considerations, see Microsoft’sWeb site at www.microsoft.com. In this example of HomeLink, the PC in the family room could use the office printer. 98-15952a-01 RJ11 Wall Jack MVL Modem Office P H O N E...

Page 12 - Optional MVL Modem Wall Placement

12 Optional MVL Modem Wall Placement The Hotwire 6310 MVL Modem is designed for tabletop placement. The MVL modemcan also be mounted on a wall. To mount the modem, you will need: - Three slotted-head #6 self-threading screws with molly bolts - Drill and 3/16” drill bit for the molly bolts - Screwdri...

Page 13 - MVL Modem Hardware Template; To Bottom

13 MVL Modem Hardware Template Front(LEDs) 98-16171 5.43" 7.55" To Bottom Hole

Page 14 - Hotwire 6310 MVL Modem Technical Specifications; Item

14 Hotwire 6310 MVL Modem Technical Specifications Item Specification * Height x Width x Depth 1.43 ″ x 6.00 ″ x 8.75 ″ (3.64 cm x 15.24 cm x 22.23 cm) Weight 1 lb. 1 oz. (0.48 kg) Power Class 2 Transformer normalservice input voltage range Input: 100 Vac (+10%), 50 Hz; 120 Vac (+10%), 60 Hz; or230 ...

Page 15 - Important Safety Instructions

15 ! Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these slots a...

Page 16 - To Users of Digital Apparatus in Canada:; Japan; Notices

16 CE Marking When the product is marked with the CE mark on the equipment label, thisdemonstrates full compliance with the following European Directives: H Directive 73/23/EEC – Council Directive of 19 February 1973 on theharmonization of the laws of the member states relating to electrical equipme...

Page 17 - Declaration of Conformity; Hotwire; Government Requirements

17 Declaration of Conformity This Declaration of Conformity is made by Paradyne Corporation pursuant to Parts 2and 15 of the Federal Communications Commission’s Rules. This complianceinformation statement pertains to the following products: Trade Name: Hotwire Model Number: 6310-A2-200 This device c...

Page 18 - United States – Notice to Users of the Telephone Network; or to speak with a company representative.; The user is not authorized to repair or modify the equipment.

18 United States – Notice to Users of the Telephone Network 1. This equipment complies with Part 68 of the FCC rules. On the equipment is a label that contains, among other information, the FCC registration number andringer equivalence number (REN) for this equipment. The label is located on thebott...

Page 19 - Notice to Users of the Canadian Telephone Network

19 Notice to Users of the Canadian Telephone Network The Industry Canada label identifies certified equipment. This certification means thatthe equipment meets telecommunications network protective, operational and safetyrequirements as prescribed in the appropriate Terminal Equipment TechnicalRequi...