Paradyne 3162 - Manual

Paradyne 3162

Paradyne 3162 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
101 Page 101
102 Page 102
103 Page 103
104 Page 104
105 Page 105
106 Page 106
107 Page 107
108 Page 108
109 Page 109
110 Page 110
111 Page 111
112 Page 112
113 Page 113
114 Page 114
115 Page 115
116 Page 116
117 Page 117
118 Page 118
119 Page 119
120 Page 120
121 Page 121
122 Page 122
123 Page 123
124 Page 124
125 Page 125
126 Page 126
127 Page 127
128 Page 128
129 Page 129
130 Page 130
131 Page 131
132 Page 132
133 Page 133
134 Page 134
135 Page 135
136 Page 136
137 Page 137
138 Page 138
139 Page 139
140 Page 140
141 Page 141
142 Page 142
143 Page 143
144 Page 144
145 Page 145
146 Page 146
147 Page 147
148 Page 148
149 Page 149
150 Page 150
151 Page 151
152 Page 152
153 Page 153
154 Page 154
155 Page 155
156 Page 156
157 Page 157
158 Page 158
159 Page 159
160 Page 160
161 Page 161
162 Page 162
163 Page 163
164 Page 164
165 Page 165
166 Page 166
167 Page 167
168 Page 168
169 Page 169
170 Page 170
171 Page 171
172 Page 172
173 Page 173
174 Page 174
175 Page 175
176 Page 176
177 Page 177
178 Page 178
179 Page 179
180 Page 180
181 Page 181
182 Page 182
183 Page 183
184 Page 184
185 Page 185
186 Page 186
187 Page 187
188 Page 188
189 Page 189
Page: / 189

Table of Contents:

  • Page 2 – Copyright
  • Page 3 – Important Information; Important Safety Instructions
  • Page 4 – EMI Warnings
  • Page 5 – Government Requirements and Equipment Return; DSU/CSU Facility Interface Codes
  • Page 7 – Contents; About This Guide
  • Page 8 – ii; Operation
  • Page 9 – iii; Monitoring and Testing
  • Page 10 – iv; Asynchronous Terminal Menu
  • Page 11 – SNMP MIB Objects
  • Page 12 – vi; This page intentionally left blank.
  • Page 13 – vii; Document Purpose and Intended Audience; Section
  • Page 14 – viii; Appendix F; Product-Related Documents; Document Number; Paradyne documents are also available on the World Wide Web at:; Reference Documents; Industry Canada CS-03
  • Page 15 – Introduction; Overview; Local or remote configuration and operation flexibility.
  • Page 16 – Asynchronous Terminal Interface Support; Alarm Message Capability; Maintenance; Telnet Access
  • Page 17 – Physical Description; The LEDs are described in the
  • Page 18 – DSU/CSU Rear Panel Connectors
  • Page 19 – Installation; Some common applications for the DSU/CSU are:
  • Page 20 – NETWORK
  • Page 21 – SNMP or Telnet Connection Examples; Direct Connection
  • Page 23 – Important Instructions; Important Safety; Pin Assignments; Cabling Examples
  • Page 24 – Procedure; Once the DSU/CSU is plugged in, the Fail LED blinks ON and Off
  • Page 25 – Menu Organization
  • Page 27 – Name
  • Page 28 – Data Port LEDs
  • Page 29 – Initiating an Asynchronous Terminal Session; Entering a Password to Gain Access; Ending an Asynchronous Terminal Session; Main Menu Screen
  • Page 30 – Recovering Asynchronous Terminal Operation; The System Paused screen appears. Use it to reset the COM port
  • Page 32 – Using Asynchronous Terminal Screens; There are three types of asynchronous terminal screens.; DTE; (when a command takes longer than five; Command Complete
  • Page 33 – Keyboard Keys
  • Page 34 – Setting Customer Identification; Use the Customer ID field to set the customer identification.; Customer Identification Screen
  • Page 35 – Displaying LED Conditions; To display LED conditions:; Example of Display LEDs Screen
  • Page 36 – Changing Configuration Options; The configuration options are divided into functional groups.
  • Page 37 – Displaying or Editing Configuration Options; To display or edit configuration options:; Configuration Load Screen
  • Page 38 – Configuration Edit/Display Screen
  • Page 39 – Saving Edit Changes; To save edit changes:; prompt if you select either
  • Page 40 – Configuration Examples
  • Page 41 – Selecting the Port; To select the COM port as the SNMP or Telnet link:; Configuration Save Screen
  • Page 42 – Setting the IP Address; IP Network Addressing Scenario; To assign an IP address to the COM port:
  • Page 43 – Selecting the Link Layer Protocol
  • Page 44 – Configuring DS0 Channels; Configuration Options
  • Page 45 – Example of Channel Allocation
  • Page 46 – Network Interface; Example of Network Interface Worksheet
  • Page 47 – Allocation; Example of DTE Drop/Insert Interface Worksheet
  • Page 48 – Displaying DS0 Channel Assignments; DTE to Network DS0 Designations
  • Page 49 – To display the DS0 channel allocation:
  • Page 50 – Making DTE to Network Assignments
  • Page 51 – Configuring; The Load Configuration From screen appears.; DTE to Interface Options Screen
  • Page 52 – Allocating Data Ports Using the Block or ACAMI Assignment Method
  • Page 53 – Clearing DS0 Channel Allocation
  • Page 54 – Establishing Access Security on a Port; To establish access security on the communication port:
  • Page 55 – Login Records Saved; Setting a Password
  • Page 56 – reappears and waits for password entry.; User; are disconnected, and an SNMP trap is generated.; Entering a Password
  • Page 57 – Selecting the Timing Source; Appendix C; Common Clocking Configurations
  • Page 58 – Providing Backup Capability
  • Page 60 – Message
  • Page 61 – Device Health and Status; To display health and status messages:
  • Page 62 – Performance Reports; . These registers are status registers that collect
  • Page 63 – To display performance reports:; Register
  • Page 66 – Alarms
  • Page 67 – SNMP Traps
  • Page 69 – Troubleshooting; Symptom
  • Page 71 – Test Jack branch of the asynchronous terminal menu tree (see; To select either Equipment or Network for the Monitor test jack:; Test Jacks
  • Page 72 – Test Jack Functions; Test Commands; Use the Test branch of the asynchronous terminal menu tree (see
  • Page 73 – Remote Loopback Tests; For Networks; Sending a Line Loopback Up or Down; or Down depending on the type of sequence that you want to send.
  • Page 74 – Sending a V.54 or ANSI FT1 Activation/Deactivation Sequence; the synchronous data port that you want to test.; Local Loopback Tests; Local loopback tests can be aborted (Abort Command) at any time.
  • Page 75 – Starting a Line Loopback; CSU; To perform a Line loopback:
  • Page 76 – Starting a Payload Loopback; Starting a DTE Loopback
  • Page 77 – Starting a Repeater Loopback; To perform a Repeater loopback:
  • Page 78 – Starting a Data Channel Loopback; To perform a Data Channel loopback:
  • Page 79 – Starting a Data Terminal Loopback; Aborting Loopbacks
  • Page 80 – Test Patterns; Valid Send Test Pattern Combinations; Sending Network QRSS or Network 1-in-8 Test Patterns; on the type of test pattern that you want to send.
  • Page 81 – Sending Port QRSS or Port 511 Test Patterns; Monitoring Network QRSS Test Patterns; Monitoring Port QRSS or Port 511 Test Patterns
  • Page 82 – Aborting Test Patterns; To abort test patterns:; Lamp Test; Starting a Lamp Test; To start a Lamp test:; Aborting a Lamp Test; To abort the Lamp test:
  • Page 83 – Displaying DSU/CSU Test Status; To display test status:; Test Status Messages
  • Page 87 – Technical Specifications; Specifications
  • Page 89 – Alarm and Trap configuration options
  • Page 90 – Network Interface Configuration Options; Network Interface Configuration Options (1 of 3)
  • Page 91 – Network Interface Configuration Options (2 of 3)
  • Page 92 – Network Interface Configuration Options (3 of 3); DTE Interface Configuration Options; DTE Interface Configuration Options (1 of 2)
  • Page 93 – DTE Interface Configuration Options (2 of 2)
  • Page 94 – Sync Data Port Configuration Options; Sync Data Port Configuration Options (1 of 5)
  • Page 95 – Sync Data Port Configuration Options (2 of 5)
  • Page 96 – Sync Data Port Configuration Options (3 of 5)
  • Page 97 – Sync Data Port Configuration Options (4 of 5)
  • Page 98 – Sync Data Port Configuration Options (5 of 5)
  • Page 99 – Cross Connect Configuration Options; Sync Data Port Assignment Options (
  • Page 100 – Sync Data Port Assignment Options; Sync Data Port Assignment Options (1 of 3)
  • Page 101 – Sync Data Port Assignment Options (2 of 3)
  • Page 102 – Sync Data Port Assignment Options (3 of 3)
  • Page 103 – General Configuration Options
  • Page 105 – User Interface Configuration Options; External Device Configuration Options (; Communication Port Configuration Options; Communication Port Configuration Options (1 of 3)
  • Page 106 – Communication Port Configuration Options (2 of 3)
  • Page 107 – Communication Port Configuration Options (3 of 3); External Device Configuration Options; External Device Configuration Options (1 of 3)
  • Page 108 – External Device Configuration Options (2 of 3)
  • Page 109 – External Device Configuration Options (3 of 3)
  • Page 110 – Telnet Sessions Configuration Options
  • Page 111 – Auxiliary Port Configuration Options
  • Page 112 – Alarm and Trap Configuration Options; Alarm and Trap Configuration Options (1 of 2)
  • Page 113 – Alarm and Trap Configuration Options (2 of 2)
  • Page 114 – Communication Protocol Configuration Options; Communication Protocol Configuration Options (1 of 3)
  • Page 115 – Communication Protocol Configuration Options (2 of 3)
  • Page 116 – Communication Protocol Configuration Options (3 of 3)
  • Page 117 – General SNMP Management Configuration Options
  • Page 118 – SNMP NMS Security Configuration Options
  • Page 119 – SNMP Traps Configuration Options; SNMP Traps Configuration Options (1 of 3)
  • Page 120 – SNMP Traps Configuration Options (2 of 3)
  • Page 121 – SNMP Traps Configuration Options (3 of 3)
  • Page 122 – Configuration Worksheets; Network Interface Options
  • Page 127 – DTE Signaling
  • Page 128 – Options
  • Page 129 – General Options; User Interface: External Device Options
  • Page 130 – User Interface: Telnet Sessions Options
  • Page 133 – Equipment; T1 Network Interface; T1 Network Interface Connector
  • Page 135 – DTE Drop/Insert Interface; Signal
  • Page 136 – AUX Port Interface; AUX Port Connector
  • Page 137 – COM Port Interface; and the COM; COM Port Connector
  • Page 141 – RS449 Cable Interface
  • Page 145 – ) to connect an external modem to the DSU/CSU’s; Serial Crossover Cable
  • Page 146 – External Clock Interface; The External Clock connector pinouts are in Table D-9.; External Clock Connector
  • Page 147 – MIB II; – Defines objects for managing DS1 interfaces and supports the; Generic-Interface MIB Extension; – An extension to MIB II that defines; Enterprise MIB; – Defines objects unique to devices like the Model 3162.
  • Page 149 – System Group – “sysName” Object (system 5); This object provides the physical location of this node.; System Group – “sysServices” Object (system 7); Interface Group, MIB II; Interface Group – “ifNumber” Object (interfaces 1)
  • Page 151 – Interface Group – “ifType” Object (ifEntry 3); slip(28) – Used for the COM port when the port is configured for SLIP.; Interface Group – “ifMtu” Object (ifEntry 4); The currently configured data rate for the port.; Interface Group – “ifAdminStatus” Object (ifEntry 7)
  • Page 152 – Interface Group – “ifOperStatus” Object (ifEntry 8)
  • Page 153 – Interface Group – Input Counters (objects ifEntry 10 to ifEntry 15)
  • Page 154 – IP Group – “ipAdEntAddr” Object (ipAddrEntry 1); ipRouteDest
  • Page 156 – IP Group – “ipRouteMetric2” Object (ipRouteEntry 4); For standalone devices, ipRouteMetric2 is not used and contains –1.; IP Group – “ipRouteProto” Object (ipRouteEntry 9); netmgmt(3) – Route added or modified by means of an SNMP set.; IP Group – “ipRouteAge” Object (ipRouteEntry 10); The ICMP Group objects are fully supported by the DSU/CSU.
  • Page 157 – Transmission Group, MIB II
  • Page 159 – Near End Group – “dsx1SendCode” Object (dsx1ConfigEntry 7); This object is only supported on the Net T1 Interface.; Near End Group – “dsx1LoopbackConfig” Object (dsx1ConfigEntry 9)
  • Page 160 – Near End Group – “dsx1LineStatus” Object (dsx1ConfigEntry 10); dsx1RcvFarEndLOF(2) – A yellow alarm signal is being received.; Near End Group – “dsx1SignalMode” Object (dsx1ConfigEntry 11)
  • Page 162 – Near End Group – The DS1 Total Table Objects (dsx1TotalEntry)
  • Page 164 – General Port Table – “rs232PortType” Object (rs232PortEntry 2)
  • Page 166 – Input Signal Table – “rs232InSigName” (rs232InSigEntry 2); This object is not supported by the DSU/CSU.
  • Page 167 – Output Signal Table – “rs232OutSigName” (rs232OutSigEntry 2)
  • Page 168 – Generic Interface Test Table, Generic Interface MIB; Start/stop the Monitor QRSS test pattern on the network interface.
  • Page 171 – The IP network addressing scenario (
  • Page 172 – Daisy-Chained Standalone at the Central Site
  • Page 173 – Equipment List
  • Page 175 – Glossary
  • Page 185 – Index
Loading the manual

ACCULINK

3162 DSU/CSU

USER’S GUIDE

Document No. 3162-A2-GB20-30

March 1999

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Copyright

Printed on recycled paper A 3162-A2-GB20-30 March 1999 Copyright 1999 Paradyne Corporation. All rights reserved.Printed in U.S.A. Notice This publication is protected by federal copyright law. No part of this publication may be copied or distributed,transmitted, transcribed, stored in a retrieval sy...

Page 3 - Important Information; Important Safety Instructions

Important Information B 3162-A2-GB20-30 March 1999 ! Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. This product is intended to be used with a 3-wire grounding type plug – a plug which has a grounding pin. Thi...

Page 4 - EMI Warnings

Important Information C 3162-A2-GB20-30 March 1999 EMI Warnings ! WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection againstharmful interference when...

Other Paradyne Models

All Paradyne Other