Page 2 - CONTENTS
22 3 CONTENTS Preface ........................................................................ 3 About the user manuals .......................................... 3About notations ....................................................... 3Trademarks and registered trademarks .................. 3Abbrev...
Page 3 - Preface; About the user manuals
22 3 Preface About the user manuals There are 2 sets of operating instructions for the WV-SP105, WV-SP102 (NTSC model), WV-SP105E, WV-SP102E (PAL model) as follows. • Installation Guide: Explains how to install and connect devices. • Operating Instructions (PDF): Explains how to perform the settings...
Page 4 - Viewer software
44 5 Viewer software • It is necessary to install the viewer software "Network Camera View 4S" to display images on a PC. This soft - ware can be installed directly from the camera or by double clicking "nwcv4Ssetup.exe" on the CD-ROM pro - vided, and then following the on-screen ins...
Page 5 - Monitor images on a PC; Monitor images from a single camera
44 5 Monitor images on a PC The following are descriptions of how to monitor images from the camera on a PC. Monitor images from a single camera Important: • When the HTTP port number is changed from "80", enter "http://IP address of the camera + : (colon) + port number" in the addre...
Page 9 - Monitor images from multiple cameras
88 9 Step 1 Click the desired [Multi-screen] button. → Images from the registered cameras will be dis- played on a selected multi-screen (screen can be split up to 16 areas). The following are instructions when displaying on a 4-split screen. q To display images on a single screen, click the [Live] ...
Page 10 - Alarm type; Action at an alarm occurrence
10 10 11 Action at an alarm occurrence The alarm action (camera action at an alarm occurrence) will be performed when the following alarms occur. Alarm type VMD alarm: When motion is detected in the set VMD area, the alarm action will be performed. * VMD stands for "Video Motion Detection". ...
Page 11 - Transmit images onto an FTP server; Transmit an alarm image at an alarm occurrence (Alarm image; Transmit images at a designated interval or period (FTP peri-
10 10 11 Transmit images onto an FTP server Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured at an alarm occurrence or captured at a designated interval to an FTP server will become available. Important: • When using this function, se...
Page 12 - About the network security; Equipped security functions
12 12 13 About the network security Equipped security functions The following security functions are featured in this camera. q Access restrictions by the host authentication and the user authentication It is possible to restrict users from accessing the camera by setting the host authentication and...
Page 13 - Display the setup menu from a PC; How to display the setup menu
12 12 13 Display the setup menu from a PC The settings of the camera can be configured on the setup menu. Important: • The setup menu is only operable by users whose access level is "1. Administrator". Refer to page 38 for how to configure the access level. How to display the setup menu Step...
Page 14 - How to operate the setup menu
14 14 15 Step 1 Click the desired button in the frame on the left of the window to display the respective setup menu. When there are tabs at the top of the setup page dis-played in the frame on the right of the window, click the desired tab to display and configure the setting items relating to the ...
Page 15 - About the setup menu window
14 14 15 About the setup menu window q [Setup] button Displays the setup menu. w [Live] button Display the "Live" page. e [Basic] button Displays the "Basic" page. The basic settings such as time and date and camera title can be configured on the "Basic" page. ( ☞ Page 17) r ...
Page 17 - Configure the basic settings of the camera [Basic]
16 16 17 Configure the basic settings of the camera [Basic] The basic settings such as camera title and time and date can be configured on the "Basic" page. Configure the basic settings [Basic] Click the [Basic] tab on the "Basic" page. ( ☞ Pages 13 and 14: How to display/operate the...
Page 19 - Configure the settings relating to images [Image]
18 18 19 Configure the settings relating to images [Image] The settings relating to JPEG and H.264 images such as the settings of image quality, etc. can be configured on this page. The "Image" page has 2 tabs; the [JPEG/H.264] tab and the [Image/Privacy] tab. Configure the settings relating...
Page 23 - Configure the settings relating to image quality, extra zoom and
22 22 23 Configure the settings relating to image quality, extra zoom and the privacy zone [Image/Privacy] Click the [Image/Privacy] tab on the "Image" page. ( ☞ Pages 13 and 14: How to display/operate the setup menu) When the [Setup >>] button of each setting item is clicked, the deta...
Page 27 - Set mask areas
26 26 27 Set mask areas When "Off" is selected for "Back light compensation(BLC)" ( ☞ page 24), it is possible to compensate for backlight by masking brighter areas. Step 1 Display the "Image adjust" setup menu. ☞ Page 24) Step 2 Click the [Start] button of "Mask area"...
Page 28 - Extra zoom setting (Extra zoom setup menu)
28 28 29 Extra zoom setting (Extra zoom setup menu) SP105 Configure the settings relating to the extra zoom. [Extra zoom] Up to 2x Extra zoom can be set. Extra zoom can be adjusted in 10 steps. [+] button The extra zoom factor will be incremented up to 2x. [−] button The extra zoom factor will be de...
Page 31 - Configure the settings relating to the alarm action [Alarm]
30 30 31 Configure the alarm settings [Alarm] The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the VMD area settings, and the alarm occurrence notification can be configured on this page. The "Alarm" page has 3 tabs; the [Alarm] tab, th...
Page 32 - Configure the settings relating to the alarm image [Alarm]
32 32 33 Configure the settings relating to the alarm image [Alarm] Click the [Alarm] tab on the "Alarm" page. ( ☞ Pages 13 and 14: How to display/operate the setup menu) The settings relating to the alarm image to be transmitted to an FTP server can be configured in this section. The alarm ...
Page 36 - Configuration of the settings relating to the mail notification
36 36 37 Configuration of the settings relating to the mail notification [Notification] Click the [Notification] tab on the "Alarm" page. ( ☞ Pages 13 and 14: How to display/operate the setup menu) The settings relating to the alarm mail can be configured. It is necessary to configure the se...
Page 37 - Configure the settings relating to Panasonic alarm protocol
36 36 37 Configure the settings relating to Panasonic alarm protocol [Notification] Click the [Notification] tab on the "Alarm" page. ( ☞ Pages 13 and 14: How to display/operate the setup menu) The settings relating to Panasonic alarm protocol can be configured in this section. ■ Panasonic a...
Page 38 - Configure the settings relating to the authentication; Configure the settings relating to the user authentication
38 38 39 Configure the settings relating to the authentication [User mng.] The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be con-figured on the "User mng." page. The "User mng." page has 3 tabs; the [User auth.] tab, the [H...
Page 39 - Configure the settings relating to the host authentication
38 38 39 Configure the settings relating to the host authentication [Host auth.] Click the [Host auth.] tab on the "User mng." page. ( ☞ Pages 13 and 14: How to display/operate the setup menu) The restriction settings of PCs (IP address) from accessing the camera can be configured on this pa...
Page 40 - Configure the settings relating to the priority stream [System]
40 40 41 Configure the settings relating to the priority stream [System] Click the [System] tab on the "User mng." page. ( ☞ Pages 13 and 14: How to display/operate the setup menu) The description below is the configuration of the priority stream that can transmit images without deterioratin...
Page 41 - Configure the settings of the servers [Server]; Configure the settings relating to the mail server [Mail]
40 40 41 Configure the settings of the servers [Server] The settings relating to the mail server, the FTP server and the NTP server can be configured on this page. The "Server" page has 3 tabs; the [Mail] tab, the [FTP] tab and the [NTP] tab. Configure the settings relating to the mail serve...
Page 42 - Configure the settings relating to the FTP server [FTP]
42 42 43 Configure the settings relating to the FTP server [FTP] Click the [FTP] tab on the "Server" page. ( ☞ Pages 13 and 14: How to display/operate the setup menu) The settings relating to the FTP server used to transmit the alarm images can be configured on this page. [FTP server address...
Page 43 - Configure the settings relating to the NTP server [NTP]
42 42 43 Configure the settings relating to the NTP server [NTP] Click the [NTP] tab on the "Server" page. ( ☞ Pages 13 and 14: How to display/operate the setup menu) The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this page. Imp...
Page 47 - Configure the settings relating to DDNS [DDNS]
46 46 47 Configure the settings relating to DDNS [DDNS] Click the [DDNS] tab on the "Network" page. ( ☞ Pages 13 and 14: How to display/operate the setup menu) When using the DDNS function, it is possible to access with "Host name registered in the DDNS server.nmdns.net". To use the ...
Page 48 - Configure the settings relating to SNMP [SNMP]
48 48 49 [Community] Enter the community name to be monitored. Available number of characters: 0 - 32 characters Default: None (blank) Important: • When using the SNMP function, it is necessary to enter the community name. When no community name is entered, the SNMP function will not work. [System n...
Page 49 - Configure the settings relating to the FTP periodic image trans-
48 48 49 Configure the settings relating to the FTP periodic image trans- mission [FTP img. trans.] Click the [FTP img. trans.] tab on the "Network" page. ( ☞ Pages 13 and 14: How to display/operate the setup menu)The settings relating to the periodic transmission of images to an FTP server ...
Page 50 - Configure the schedule settings of the FTP periodic image; How to set the schedules
50 50 51 [Image capture size] Select the capture size of images to be transmitted from the following. When "4:3" is selected for "Aspect ratio" QVGA/ VGA/ 1280x960* 1 When "16:9" is selected for "Aspect ratio" 320x180/ 640x360/ 1280x720* 1 Default: VGA *1 SP105 Config...
Page 51 - How to delete the set schedule
50 50 51 How to delete the set schedule Step 1 Uncheck the check box of the set day of the week. Step 2 Click the [Set] button after completing the settings. → The schedule of the selected day of the week is deleted.
Page 52 - Configure the settings relating to the schedules
52 52 53 Configure the settings relating to the schedules [Schedule] On the "Schedule" page, it is possible to configure the settings relating to schedules as follows.• VMD permission (Video motion detection will be active only in the specified schedule.)• Access permission (Access to the ca...
Page 56 - Viewing Help; Displaying the Help screen
56 56 57 Viewing Help If you want to know anything about operation or setup methods on screen, display the "Help" screen. Displaying the Help screen Step 1 Click the [Setup] button. → The setup screen is displayed. Clicking an underlined item win display the "Help" pop-window. It is ...
Page 57 - About the displayed system log; Error indications relating to SMTP
56 56 57 About the displayed system log Error indications relating to SMTP Category Indication Description POP3 server error Authentication error. • Entered user name or password may be incor - rect. Check if the mail settings are configured correctly. Failed to find the POP3 server. • The IP addres...
Page 59 - Troubleshooting
58 58 59 Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a prob-lem is not described below. Symptom Cause/solution Reference pages Cannot access from ...
