Panasonic KX TG833SK - User Manual

Bluetooth ® devices You can expand your phone system by pairing the following units to a single base unit. Your Bluetooth cellular phone *1 : 2 max. (for cellular calls: page 17) Your Bluetooth headset *1 : 1 max. (for a wireless hands-free conversation: page 48) *1 Your cellular phone and headset m...

For your safety To prevent severe injury and loss of life/property, read this section carefully beforeusing the product to ensure proper and safeoperation of your product. WARNING Power connection R Use only the power source marked on theproduct. R Do not overload power outlets andextension cords. T...

R This product is unable to make calls when:– the handset batteries need recharging or have failed. – there is a power failure. Battery R We recommend using the batteries notedon page 4. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutila...

R If the reception for a base unit location isnot satisfactory, move the base unit toanother location for better reception. Environment R Keep the product away from electrical noisegenerating devices, such as fluorescentlamps and motors. R The product should be kept free fromexcessive smoke, dust, h...

Specifications R Standard: DECT 6.0 (Digital Enhanced CordlessTelecommunications 6.0)Bluetooth wireless technology 2.1 R Frequency range: 1.92 GHz to 1.93 GHz (DECT)2.402 GHz to 2.48 GHz (Bluetooth) R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption:Base unit:...

Setting up Connections R If you do not connect the telephone linecord and use only cellular lines, set thecellular line only mode to use this unit moreconveniently (page 19). n Base unit Connect the AC adaptor to the unit bypressing the plug firmly.Connect the AC adaptor to the poweroutlet.Connect t...

Removing the battery 1 2 Battery charging Charge for about 7 hours. R Confirm “ Charging ” is displayed ( 1 ). R When the batteries are fully charged, “ Fully charged ” is displayed. 1 Note when setting up Note for connections R The AC adaptor must remain connected atall times. (It is normal for the...

Icon Battery level Empty Ni-MH battery performance (suppliedbatteries) Operation Operating time In continuous use 10 hours max. *1 Not in use (standby) 5 days max. *1 *1 If eco mode is on. Note: R Actual battery performance depends onusage and ambient environment. Intelligent eco mode This feature a...

M N (Assist) M FLASH N R You can use the handset to operatethe voice recognition feature of yourcellular phone by pressing M N (page 48). Charge contacts n Control type Soft keys By pressing a soft key, you can select thefeature shown directly above it on thedisplay. After a cellular phone is paired...

Item Meaning Silent mode is on. (page 40) Call sharing mode is off.(page 38)Alarm is on. (page 40) Handset number Battery level Blocked call (page 26) Clarity booster is on. *2 (page 23) In use Answering system is beingused by another unit. Cell1 inuse Someone is using thecorresponding line. Cell2 i...

Status Meaning Light off – A Bluetooth headset is not paired to the base unit. – The Bluetooth headset is not connected to the baseunit. Language settings Display language1 M MENU N#110 2 MbN : Select the desired setting. a M SAVE N a M OFF N Voice announcement language You can select the language u...

Link to cell feature You can connect your base unit and cellularphone using Bluetooth wireless technology, sothat you can make or answer cellular callsusing your phone system. This allows you to:– use the unit to talk on cellular calls even if some areas of your home have poorcellular reception, sim...

1 For CELL 1: M MENU N#6111 For CELL 2: M MENU N#6112 2 MbN : “ Yes ” a M SELECT N R When the cellular phone is unpaired,the CELL indicator is turned off. 3 M OFF N Link to cell settings Selecting which unit receivescellular calls You can select which unit rings and receivescalls for a cellular line...

Important: R When 3 Bluetooth devices (2 cellularphones and 1 headset) are paired to thebase unit, only 2 Bluetooth devices can beused with the unit at the same time, and thebase unit loses its connection from otherBluetooth devices. To automatically resumethe connection to Bluetooth devices, leavet...

Cellular line selection This feature determines which cellular line isselected to make cellular calls when:– you press M CELL N on the handset. – you press M N or MZN on the handset while the cellular line only mode is turnedon. The following settings are available:– “ Manual ” (default): You can se...

Making cellular calls Important: R The unit can be used to talk on 2 lines atthe same time (for example, 2 cellular lines,or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used withthe unit at the same time (for example, 2cellular lines, or the headset and 1 cellularline *1 ). ...

Note: R To switch to the speaker, press MZN . To switch back to the receiver, press MZN / M N . R In step 1, you can store the dialed phonenumber to the phonebook by pressing andholding MFN W for a few seconds. Making a call using the redial list The last 5 phone numbers dialed are stored inthe redi...

R Another handset user can take the callby pressing M CELL N . *1 *1 If you press M CELL N and the selection list is displayed, selectthe desired cellular line and press M SELECT N . To release hold on the landline: Press M N . R Another handset user can take the callby pressing M N . Note: R After ...

Transferring calls, conferencecalls Outside calls can be transferred or aconference call with an outside party can bemade between handsets. 1 During an outside call, press M MENU N . 2 MbN : “ Intercom ” a M SELECT N 3 MbN : Select the desired unit. a M SELECT N 4 Wait for the paged party to answer....

Call block You can press the M CALL BLOCK N button in the following situations to disconnect thecurrent call and add a phone number to thecall block list:– when an incoming call is being received– when an incoming call is being recorded by the answering system – when talking on an outside callOnce a...

“ Call block ” a M SELECT N a Go to step 4. 3 M CALL BLOCK N 4 MbN : “ Yes ” a M SELECT N 5 Edit the phone number if necessary(24 digits max.). a M SAVE N a M OFF N Adding call blocked numbersmanually 1 M CALL BLOCK N 2 MbN : “ Block a single number ” a M SELECT N 3 M MENU N a MbN : “ Add ” a M SELE...

Phonebook You can add 3,000 names (16 charactersmax.) and phone numbers (24 digits max.) tothe phonebook, and assign each phonebookentry to the desired group (page 29). Thefollowing groups are available:– Group 1: “ Home ” *1 (default) – Group 2: “ Cell 1 ” *1 – Group 3: “ Cell 2 ” *1 – Group 4-9: Y...

3 M SAVE N 4 MbN : “ Phonebook ” a M SELECT N 5 Continue from step 3, “Editing entries”,page 30. n When a cellular phone is not paired: 1 MCN CID 2 MbN : Select the desired entry. a M MENU N R To edit the number: MbN : “ Edit ” a M SELECT N Press M EDIT N repeatedly until the phone number is shown i...

Editing entries1 Find the desired entry (page 29). 2 M MENU N a MbN : “ Edit ” a M SELECT N 3 Edit the name if necessary. a M OK N 4 Edit the phone number if necessary. a M OK N 5 MbN : Select the desired group (page 29). a M SELECT N 2 times a M OFF N Erasing entries Erasing an entry 1 Find the des...

Erasing an entry1 Press and hold the desired speed dial key( 1 to 9 ). a M MENU N 2 MbN : “ Erase ” a M SELECT N 3 MbN : “ Yes ” a M SELECT N a M OFF N Viewing an entry/Making a call n Using a cellular line: 1 Press and hold the desired speed dialkey ( 1 to 9 ). 2 M CELL N R The unit starts dialing ...

Menu list To access the features, there are 2 methods. n Scrolling through the display menus 1 M MENU N 2 Press MCN or MDN to select the desired main menu. a M SELECT N 3 Press MCN or MDN to select the desired item from the next sub-menus. a M SELECT N 4 Press MCN or MDN to select the desired settin...

Alarm An alarm sounds at the set time for 1 minuteand is repeated 5 times at 5 minute intervals(snooze function). A text memo can also bedisplayed for the alarm. A total of 3 separatealarm times can be programmed for eachhandset. You can set one of 3 different alarmoptions (once, daily, or weekly) f...

2 MbN : Select the desired setting. a M SAVE N R If you select “ Off ” , press M OFF N to exit. 3 Enter the desired hour and minute youwish to start this feature. 4 * : Select “ AM ” or “ PM ” . a M OK N 5 Enter the desired hour and minute youwish to end this feature. 6 * : Select “ AM ” or “ PM ” ....

Using Caller ID service Important: R This unit is Caller ID compatible. To useCaller ID features, you must subscribe to aCaller ID service. Contact your phoneservice provider for details. Caller ID features When an outside call is being received, thecaller information is displayed.Caller information...

– A specific line is set to make cellular calls (page 20). 5 MbN : Select the desired cellular phone. a M SELECT N n Using a landline 1 MCN CID 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 To call back, press M N . To exit, press M OFF N . Note: R If the ...

Copying phonebook from a cellular phone (phonebook transfer) You can copy phonebook entries from thepaired cellular phones or other cellular phones(not paired) to the unit’s phonebook. A cellularphone must be compatible with Bluetoothwireless technology. Important: R Your cellular phone must support...

– “ Trunk prefix ” : A trunk prefix; the initial digit(s) to be dialed in a domestic call, priorto the area code. 1 M MENU N 2 To store “ International code ” : #117 To store “ Country code ” : #118 To store “ Trunk prefix ” : #119 3 Enter the desired number. a M SAVE N a M OFF N Note: R After you c...

Important: R For further information, refer to theinstructions on web page listed above. R To use this feature, the following settingsare required.– Android phone: Bluetooth must be turned on. – Android phone: [Application Alerts manager] must be turned on. – Handset: “ Alert On/Off ” must be turned...

Remote voice assist For iPhone ® and Android ™ smartphone users You can use the handset to operate the voicerecognition feature of a paired cellular phone(Siri ® , Google Now ™ , or S Voice). For example, you can speak into the handset andcommand your cellular phone to make a call. Compatible voice ...

Pairing a Bluetooth headset tothe base unit Important: R Make sure that the Bluetooth headset is notconnected to any other Bluetooth device. 1 Bluetooth headset: Set your headset to pairing mode. R Refer to the headset’s operatinginstructions. 2 Handset: M MENU N#621 3 If your headset PIN is “ 0000 ...

Answering system for landline The answering system can answer and recordcalls for you when you are unavailable toanswer the phone.You can also set the unit to play a greetingmessage but not to record caller messages byselecting “ Greeting only ” as the recording time setting (page 55). Important: R ...

Resetting to a pre-recorded greetingmessage Use this procedure to erase your greetingmessage and use a pre-recorded one. 1 M MENU N#304 2 M YES N a M OFF N Playing back the greetingmessage1 M MENU N#303 2 To exit, press M OFF N . Listening to messages Using the base unit When new messages have been ...

Key Operation *6 Reset to a pre-recordedgreeting message *1 If pressed within the first 5 seconds of a message, the previous message isplayed. *2 To resume playback: MbN : “ Playback ” a M SELECT N *3 You can also erase as follows: M PAUSE N a MbN : “ Erase ” a M SELECT N a MbN : “ Yes ” a M SELECT ...

Using the answering systemremotely1 Dial your landline phone number from atouch-tone phone. 2 After the greeting message starts, enteryour remote access code. 3 Follow the voice guidance prompts asnecessary or control the unit usingremote commands (page 54). 4 When finished, hang up. Voice guidance ...

answers calls. You can select 2 to 7 rings, or “ Toll saver ” . The default setting is “ 4 rings ” . “ Toll saver ” : The unit’s answering system answers at the end of the 2nd ring when newmessages have been recorded, or at the endof the 5th ring when there are no newmessages. If you call your phone...

Voicemail service for landline In addition to your unit’s answering systemyou may also have voicemail service fromyour phone service provider. Voicemail is an answering service that may be offered byyour phone service provider. This service canalso record calls when you are unavailable toanswer the ...

2 Follow the pre-recorded instructions. 3 When finished, hang up. Note: R You can also use the M ACCESS N soft key, if displayed, to play new voicemailmessages. R If the handset still indicates there are newmessages even after you have listened toall new messages, turn it off by pressingand holding ...

To remove the wall mounting adaptor While pushing down the release levers ( A ), remove the adaptor ( B ). B A A Charger Drive the screws ( 1 ) (not supplied) into the wall. 2 27.2 mm (1 1 / 16 inches) 1 2 For assistance, please visit http://shop.panasonic.com/support 59 Useful Information TG83xSK̲O...

Error messages Display message Cause/solution Ask phonecompany forVM access # R You have not stored the voicemail access number.Store the number (page 56). Busy R No cellular phone is paired to the base unit. Pair acellular phone (page 17). R The called unit is in use. R Other units are in use and t...

Display message Cause/solution Main unitno power or No link. Re-connect baseAC adaptor. R Confirm the base unit’s AC adaptor is connected tothe unit and the power outlet correctly. R The handset has lost communication with the baseunit. Move closer to the base unit and try again. R Unplug the base u...

Menu list Problem Cause/solution The display is in a language Icannot read. R Change the display language (page 16). I cannot register a handset to abase unit. R The maximum number of handsets (6) is alreadyregistered to the base unit. Cancel unused handsetregistrations from the base unit (page 41)....

Problem Cause/solution I cannot make local calls withthe handset using a cellular line. R You need to add your area code when making cellularcalls. Store your area code in order to automatically add itto the beginning of the 7-digit phone number whenmaking cellular calls (page 20). I cannot make or ...

Using Bluetooth devices Problem Cause/solution I cannot copy phonebookentries from a cellular phone. R Confirm that the cellular phone supports Bluetoothwireless technology. R Confirm that the cellular phone supports the Phone BookAccess Profile (PBAP) or Object Push Profile (OPP)specification. R If...

Answering system Problem Cause/solution The unit does not record newmessages. R The answering system is turned off. Turn it on (page 51). R The answering system does not answer or record callsfrom cellular lines. R The message memory is full. Erase unnecessarymessages (page 52, 52). R The recording ...

Voicemail Problem Cause/solution “ Voicemail msg. via phone co. ” is shown on the handset display.How do I remove this messagefrom the display? R This notification is displayed when your phone serviceprovider’s voicemail service (not the unit’s answeringsystem) has recorded a message for you. Typica...

FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------. If requested, this number must be provided...

Guía Rápida Española Conexiones 1 Conecte el adaptador de corriente alterna a la toma de corriente. Unidad base 1 Conecte el adaptador de corriente alterna a la unidad presionándolo firmemente. 2 Conecte el adaptador de corriente alterna a la toma de corriente. 3 Conecte el cable de la línea telefón...

Instalación y carga de la batería Cargue aproximadamente durante 7 horas. Nota: L UTILICE SOLO baterías recargables de Ni-MH tamaño AAA (R03) ( ). L NO utilice baterías alcalinas, de manganeso ni de Ni-Cd. L Confirme que las polaridades estén correctas ( S , T ). L Cambie el idioma de la pantalla. L...

Cambio de idiomas (Auricular) (predeterminado: “ English ”) Cuando instale las baterías por primera vez, es posible que aparezca “ Set date/time Press SELECT ” . Oprima { OFF } para salir. Idioma de la pantalla { MENU } ( 11 ) s { r } : “ Español ” s { GUARDAR } s { OFF } Idioma de anuncio de voz { ...

Operaciones básicas Cómo hacer y contestar llamadas (Auricular) Para hacer llamadas de celular 1 Marque el número telefónico. s { CEL. } L Cuando el modo exclusivo para la línea celular está configurado, también puede oprimir {C} / {s} en lugar de { CEL. } . L Cuando solo hay 1 teléfono celular empa...

Cómo usar dispositivos Bluetooth Copiado de entradas del directorio telefónico desde un teléfono celular con Bluetooth (transferencia del directorio telefónico) Puede copiar entradas del directorio telefónico desde los teléfonos celulares emparejados o desde otros teléfonos celulares (no emparejados...

Preguntas frecuentes Pregunta Causa y solución ¿Por qué aparece _ ? L El auricular está demasiado lejos de la unidad base. Acérquelo. L El adaptador para corriente de la unidad base no está conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base. L El auricular no está...

Customer services Accessories! hp://shop.panasonic.com/support Customer Services Directory Shop for all your Panasonic gear Go to Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Pers...

Limited Warranty (ONLY FOR U.S.A.) Limited Warranty Coverage (For USA Only) Labor One (1) Year Parts One (1) Year To submit a new repair request and for quick repair status visit our Web Site athttp://shop.panasonic.com/support Panasonic Products Limited Warranty Online Repair Request Mail-In Servic...

Limited Warranty Limits and Exclusions (As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.) This warranty ONLY COVERS failure...

Index # 3-way conference: 23 A Additional handset: 41 Alarm: 40 Answering calls: 22 Answering system Call screening: 54 Erasing messages: 52 , 53 , 54 Greeting message: 51 Greeting only: 55 Listening to messages: 52 , 54 Number of rings: 54 Recording time: 55 Remote access code: 53 Remote operation:...

1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read troubleshooting page in the Operating Instructions . Visit our Web site: http://shop.panasonic.com/support L FAQ and t...