Panasonic KXTG4743B - Manual

*1 KX-TG4731/KX-TG4741*2 KX-TG4732/KX-TG4742*3 KX-TG4733/KX-TG223SK/KX-TG4743/KX-TG4753/KX-TG4763/KX-TG4793*4 KX-TG4734/KX-TG4744/KX-TG234SK/KX-TG4784*5 KX-TG4745/KX-TG235SK*6 The handset cover comes attached to the handset. n For KX-TG4751/KX-TG4761 series No. Accessory item/Order number Quantity H...

Expanding your phone system Optional handset feature overview Handset (optional): KX-TGA470 You can expand your phone system byregistering optional handsets (6 max.) to asingle base unit. R Optional handsets may be a different colorfrom that of the supplied handsets. 6 For assistance, please visit h...

For your safety To prevent severe injury and loss of life/property, read this section carefully beforeusing the product to ensure proper and safeoperation of your product. WARNING Power connection R Use only the power source marked on theproduct. R Do not overload power outlets andextension cords. T...

– the handset batteries need recharging or have failed. – there is a power failure. Battery R We recommend using the batteries notedon page 5. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries.Released electrolyte from t...

R If the reception for a base unit location isnot satisfactory, move the base unit toanother location for better reception. Environment R Keep the product away from electrical noisegenerating devices, such as fluorescentlamps and motors. R The product should be kept free fromexcessive smoke, dust, h...

Specifications R Standard: DECT 6.0 (Digital EnhancedCordless Telecommunications 6.0) R Frequency range: 1.92 GHz to 1.93 GHz R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption:Base unit: Standby: Approx. 0.9 WMaximum: Approx. 3.8 W Charger: Standby: Approx. 0...

Setting up Connections R Use only the supplied Panasonic ACadaptor PNLV226. n Base unit Correct Incorrect To power outlet Press plug firmly. Hook “Click” To single-linetelephone jack(RJ11C) DSL/ADSL filter* “Click” *DSL/ADSL filter (not supplied) is required ifyou have DSL/ADSL service. n Charger To...

Note when setting up Note for connections R The AC adaptor must remain connected atall times. (It is normal for the adaptor to feelwarm during use.) R The AC adaptor should be connected to avertically oriented or floor-mounted ACoutlet. Do not connect the AC adaptor to aceiling-mounted AC outlet, as...

Controls Handset A B A DE I JK L H M B C F G Ringer indicatorMessage indicatorSpeaker MjN / MkN (VOL.: Volume up/down) M N (SP-PHONE: Speakerphone) M N (TALK) Headset jackDial keypad ( * : TONE) ReceiverDisplay M CALL WAIT NM FLASH N M OFF N MicrophoneCharge contacts n Control type Soft keys The han...

M N (PLAY) Message indicator M LOCATOR N M ANSWER ON/OFF N ANSWER ON/OFF indicator n KX-TG4741/KX-TG4761 series (page 3) A B M N O JK C EF D G HI L Charge contactsSpeaker M HOLD N M CONF N (Conference) M REDIAL N M PAUSE N M FLASH N M CALL WAIT N M SP-PHONE N (Speakerphone) SP-PHONE indicator M ERAS...

Display Handset display items Item Meaning Within base unit rangeOut of base unit range The line is in use. R When flashing:The call is put on hold. R When flashing rapidly: Anincoming call is now beingreceived. Eco mode is on. (page 12) Equalizer is set. (page 20)Speakerphone is on.(page 17)Ringer ...

Note: R When English is selected as the displaylanguage, 12-hour clock format is used.When Spanish is selected, 24-hour clockformat is used. R The date and time may be incorrect after apower failure. In this case, set the date andtime again. Display language You can select either “ English ” or “ Es...

Making calls Using the handset1 Lift the handset and dial the phonenumber. R To correct a digit, press M CLEAR N . 2 Press M N or M CALL N . 3 When you finish talking, press M OFF N or place the handset on the base unit orcharger. Using the speakerphone 1 Dial the phone number and press M N . R Spea...

Example: If you need to dial the line access number “9” when making outside calls with aPBX: Handset 1 9 a M PAUSE N 2 Dial the phone number. a M N Base unit *1 *1 KX-TG4741/KX-TG4761 series: page 3 1 M SP-PHONE N 2 9 a M PAUSE N 3 Dial the phone number. Note for handset and base unit: R A 3.5 secon...

R The base unit user can take the call bypressing M SP-PHONE N . *1 *1 KX-TG4741/KX-TG4761 series: page 3 Base unit *1 *1 KX-TG4741/KX-TG4761 series: page 3 1 Press M HOLD N during an outside call. 2 To release hold, press M SP-PHONE N . R A handset user can take the call bypressing M N . Note for h...

Handset / Base unit *1 *1 KX-TG4741/KX-TG4761 series: page 3 Press * (TONE) before entering access numbers which require tone dialing. Handset clarity booster This feature can improve sound clarity whenthe handset is used in an area where theremay be interference. During an outside call,this feature...

Shared phonebook The shared phonebook allows you to makecalls without having to dial manually. Anyhandset registered to the base unit can usethe shared phonebook. You can add namesand phone numbers to the shared phonebook,and assign each phonebook entry to thedesired group.– KX-TG4731/KX-TG4751 seri...

Note: R When storing a calling card access numberand your PIN in the phonebook as onephonebook entry, press M PAUSE N to add pauses after the number and PIN asnecessary (page 17). R If you have rotary/pulse service, you needto press * (TONE) before pressing M MENU N in step 1 to change the dialing m...

Programmable settings You can customize the unit by programming the following features using the handset.To access the features, there are 2 methods. n Scrolling through the display menus 1 M MENU N 2 Press MCN or MDN to select the desired main menu. a M SELECT N 3 Press MCN or MDN to select the des...

*7 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones. *8 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this fea...

Special programming Alarm An alarm sounds at the set time for 3 minutesonce or daily. Alarm can be set for eachhandset. Important: R Set the date and time beforehand(page 15). 1 M MENU N#720 2 MbN : Select the desired alarm option. a M SELECT N Off Turns alarm off. Go to step 7. Once An alarm sounds...

2 Enter the desired name (max. 10characters; see the character table,page 21). R If not required, go to step 3. 3 M SAVE N 4 MbN : Select the desired setting. a M SELECT N 2 times 5 M OFF N Call block (Caller ID subscribersonly) This feature allows the unit to reject calls when:– the unit receives a...

Registering a unit Operating additional units Additional handsets Up to 6 handsets can be registered to thebase unit. Important: R See page 6 for information on the availablemodel. Registering a handset to thebase unit The supplied handset and base unit arepre-registered. If for some reason the hand...

Using Caller ID service Important: R This unit is Caller ID compatible. To useCaller ID features, you must subscribe to aCaller ID service. Contact your serviceprovider/telephone company for details. Caller ID features When an outside call is being received, thecallers name and phone number are disp...

the desired group (page 21). When a call isreceived from a caller assigned to a group, theringer you selected for that group rings aftercaller information is displayed. If you select “ Current ringer ” (default), the unit uses the ringer tone you selected on page 26 whencalls from this group are rec...

Erasing selected callerinformation1 MFN CID 2 MbN : Select the desired entry. 3 M ERASE N a MbN : “ Yes ” 4 M SELECT N a M OFF N Erasing all caller information1 MFN CID 2 M ERASE N a MbN : “ Yes ” 3 M SELECT N a M OFF N Storing caller information to thephonebook1 MFN CID 2 MbN : Select the desired e...

Answering system The answering system can answer and recordcalls for you when you are unavailable toanswer the phone.You can also set the unit to play a greetingmessage but not to record caller messages byselecting “ Greeting only ” as the recording time setting (page 39). Important: R Only 1 person...

Greeting message When the unit answers a call, a greetingmessage is played to callers.You can use either:– your own greeting message– a pre-recorded greeting message Recording your greeting message1 M MENU N#302 2 MbN : “ Yes ” a M SELECT N 3 After a beep sounds, hold the handsetabout 20 cm (8 inche...

– The message indicator on the handset flashes slowly if the message alert featureis turned on (page 39). 1 To listen to new messages: M PLAY N *1 or M MENU N#323 To listen to all messages: M MENU N#324 2 When finished, press M OFF N . *1 If there are no new messages in the answering system, M PLAY ...

Important: R To prevent unauthorized access to thisproduct, we recommend that you regularlychange the remote code. 1 M MENU N#306 2 Enter the desired 3-digit remote accesscode. 3 M SAVE N a M OFF N Deactivating remote operation Press * in step 2 on “Remote access code”, page 37. R The entered remote...

Answering system settings Number of rings before the unitanswers a call You can change the number of times thephone rings “ Ring count ” before the unit answers calls. You can select 2 to 7 rings, or “ Toll saver ” . The default setting is “ 4 rings ” . “ Toll saver ” : The unit’s answering system a...

Voice mail service Voice mail is an automatic answering serviceoffered by your service provider/telephonecompany. After you subscribe to this service,your service provider/telephone company’svoice mail system answers calls for you whenyou are unavailable to answer the phone orwhen your line is busy....

Listening to voice mail messages The unit lets you know that you have newvoice mail messages in the following ways:– “ New Voice Mail ” is displayed on the handset if message indication service isavailable. – The message indicator on the handset flashes slowly if the message alert featureis turned o...

Intercom Intercom calls can be made:– between handsets– between a handset and the base unit *1 *1 KX-TG4741/KX-TG4761 series: page 3 Note: R When paging unit(s), the paged unit(s)beeps for 1 minute. R If you receive an outside call while talkingon the intercom, you hear 2 tones.– To answer the call ...

4 To complete the transfer: Press M OFF N . R The outside call is being routed to thedestination unit. To establish a conference call: M MENU N a MbN : “ Conference ” a M SELECT N R To leave the conference, press M OFF N . The other 2 parties can continue theconversation. R To put the outside call o...

Wall mounting Note: R Make sure that the wall and the fixingmethod are strong enough to support theweight of the unit. Base unit1 Thread the AC adaptor cord andtelephone line cord through the hole inthe wall mounting adaptor in the directionof the arrow. 2 Tuck the telephone line cord inside thewall...

5 Mount the unit on a wall then slide downto secure in place. AC adaptor cord 83 mm (3 1 / 4 inches) or102 mm (4 inches) 1 2 Wall phone plate 83 mm (3 1 / 4 inches) 102 mm (4 inches) 2 1 To remove the wall mounting adaptor While pushing down the release levers ( A ), remove the adaptor ( B ). A A B ...

Error messages Display message Cause/solution Base no power or No link. Re-connect baseAC adaptor. R The handset has lost communication with the baseunit. Move closer to the base unit and try again. R Unplug the base unit’s AC adaptor to reset the unit.Reconnect the adaptor and try again. R The hand...

Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base unit’sAC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset,and then insert the batteries into the handset again. General use Problem Cause/solu...

Battery recharge Problem Cause/solution The handset beeps and/or flashes. R Battery charge is low. Fully charge the batteries (page 11). I fully charged the batteries, but– still flashes, – is displayed, or – the operating time seems to be shorter. R Clean the battery ends ( , ) and the charge conta...

Caller ID/Talking Caller ID Problem Cause/solution Caller information is notdisplayed. R You must subscribe to Caller ID service. Contact yourservice provider/telephone company for details. R If your unit is connected to any additional telephoneequipment such as a Caller ID box or cordless telephone...

Problem Cause/solution The 2nd caller’s information isnot displayed during an outsidecall. R In order to use Caller ID, call waiting, or Call WaitingCaller ID (CWID), you must first contact your serviceprovider/telephone company and subscribe to the desiredservice.After subscribing, you may need to ...

FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided ...

Guía Rápida Española Instalación CARGUE APROXIMADAMENTE DURANTE 7 HORAS Auricular Cargador Unidad base L UTILICE SOLO baterías de Ni-MH tamaño AAA (R03). L NO utilice baterías Alcalinas, de Manganeso o de Ni-Cd. L Compruebe que las polaridades son las correctas ( S , T ). L Use solo el adaptador de ...

Sugerencias de operación Teclas de función El auricular incluye 3 teclas de función. Al oprimir una tecla de función, puede seleccionar la función que aparece directamente encima de ella en la pantalla. { C } , { MENU } , { REMR. } y otras funciones adicionales se asignan a las teclas de función. Pr...

Preguntas frecuentes Pregunta Causa y solución ¿Por qué aparece _ ? L El auricular está demasiado lejos de la unidad base. Acérquelo. L El adaptador para corriente de la unidad base no está conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base. L El auricular no está...

Customer services Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.pa...

Warranty (For United States and Puerto Rico) PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “...

Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by produ...

Index # 4-way conference: 20 A Additional handset: 31 Alarm: 29 Answering calls: 18 Answering system Call screening: 35 Erasing messages: 36 , 37 , 38 Greeting message: 36 Greeting only: 39 Listening to messages: 36 , 38 Number of rings: 39 Recording time: 39 Remote access code: 37 Remote operation:...

63 Notes TG47xx(en-en)_1118_ver022.pdf 63 2011/11/18 10:26:19

1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read troubleshooting page in the Operating Instructions . If your product is not working properly. . . IMPORTANT! Visit our...