OPTOMA EP759 - Manual - manualsarea.com

Page 2 - Usage Notice; Precautions; Follow all warnings, precautions and maintenance as recom-

2 English ... Usage Notice Precautions Follow all warnings, precautions and maintenance as recom- mended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’s lens when the lamp ison. The bright light may hurt your eyes. Warning- To reduce the risk of fire...

Page 4 - Product Features; This product is an XGA single chip 0.7” DLP; Outstanding features include:; digital; Introduction

4 English ... Product Features This product is an XGA single chip 0.7” DLP TM projector. Outstanding features include: True XGA, 1024 x 768 addressable pixels Single chip DLP TM technology NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM and HDTV compatible (480i/p, 576i/p, 720p, 1080i) HDCP compliant ...

Page 5 - Package Overview; This projector comes with all the items shown below. Check

5 ... English Power Cord 1.8m VGA Cable 1.8m Remote Control with Mouse Function & Laser Pointer 2 x Battery Introduction Composite Video Cable 1 . 8 m Projector with lens cap Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact y...

Page 6 - Main Unit; Product Overview

6 English ... Main Unit Product Overview 1. Focus Ring 2. Zoom Ring 3. Elevator Button 4. Zoom Lens 5. Remote Control Receiver 6. Connection Ports 7. Power Socket 8. Control Panel 2 5 1 3 8 6 7 4 Introduction 3

Page 7 - Control Panel

7 ... English Control Panel 1. Temp Indicator LED 2. Power Indicator LED 3. Lamp Indicator LED 4. Power/Standby 5. Source 6. Four Directional Select Keys 7. Enter 8. Keystone Correction 9. Menu (On/Off) 10. Re-sync 8 5 4 6 2 1 3 1 0 Introduction 7 8 9

Page 8 - Connection Ports

8 English ... Introduction Connection Ports 1. DVI-I Input Connector (PC Digital and Analog signal/HDTV/ HDCP/Component Video Input ) 2. VGA Connector (PC Analog Signal/HDTV/Component Video Input) 3. USB Input Connector 4. RS232 Input Connector 5. Monitor Loop-through Output Connector 6. Component V...

Page 10 - Connecting the Projector; 024 X 768 resolution. Make sure the timing of the display mode is; Installation

10 English ... 1 . ................................................................................................................... Power Cord 2 . .................................................................................................................... VGA Cable 3 . ......................

Page 11 - Powering On the Projector; red; If you connect multiple sources at the same time, use the “Source”; Powering On/Off the Projector

11 ... English Installation Power/ Standby 1 Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will turn red . 3. Turn on the lamp by pressing “Power/Standby” button on the control panel. n The startup screen will d...

Page 12 - Warning Indicator; the fan failed; Powering Off the Projector; Wait 2 minutes before you can

12 English ... Installation Warning Indicator When the “TEMP” indicator turns red, it indicates the projector has overheated. The projector will automatically shut itself down. See page 31. When the “LAMP” indicator flashes red (0.5 second intervals) , it indicates a problem with the lamp. Turn ...

Page 13 - Adjusting the Projected Image; Adjusting the Projector Image Height; The projector is equipped with an elevator foot for adjusting

13 ... English Adjusting the Projected Image Adjusting the Projector Image Height Tilt Adjusting Wheel Elevator Foot 1 2 3 Elevator Button The projector is equipped with an elevator foot for adjusting the image height. To raise the image: 1. Press the elevator button n . 2. Raise the image to the de...

Page 14 - Adjusting the Projector Zoom / Focus; image diagonal size; Adjusting Projection Image Size

14 English ... Max. 29.5"(75.0cm) 73.8"(187.5cm) 123.0"(312.5cm) 172.2"(437.5cm) 196.9"(500.0cm) 300.0 "( 762.0 cm) Min. 24.6"(62.5cm) 61.5"(156.3cm) 102.5"(260.4cm) 143.5"(364.6cm) 164.0"(416.7cm) 250.1 "( 635.2 cm) Max.(WxH) 23.60" x 17.70" (...

Page 15 - User Controls; Remote Control; Control Panel & Remote Control; There are two ways for you to control the functions: Remote; Source

15 ... English User Controls Remote Control Control Panel Control Panel & Remote Control There are two ways for you to control the functions: Remote Control and Control Panel. Using the Control PanelPower/Standby 4 Refer to the “Power On/Off the Projector” section on pages 11-12. Source 4 Press ...

Page 18 - How to operate; On Screen Display Menus

18 English ... The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detectthe source. How to operate 1. To open the OSD menu, press “Menu ” on the Remote Control or Control Panel. 2. When OS...

Page 19 - Language; Computer / Video Mode

19 ... English Language Language Choose the multilingual OSD menu . Use the or key to select your prefered language.Press “Menu” to finalize the selection. Computer / Video Mode User Controls Language Management PIP Image - I Image - II Audio

Page 20 - Computer Mode

20 English ... Image-I (Computer Mode) Brightness Adjust the brightness of the image. 4 Press the to darken image. 4 Press the to lighten the image. Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amoun...

Page 21 - Brightness; Video Mode

21 ... English Image-I (Video Mode) User Controls Brightness Adjust the brightness of the image. 4 Press the to darken image. 4 Press the to lighten the image. Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast change...

Page 22 - Position

22 English ... Image-II User Controls Keystone (Keystone Correction) Adjust image distortion caused by tilting projection. (±16 degrees)Press OK to adjust 4 Vertical keystone: Press the or to adjust image distortion vertically and makes a squarer image. 4 Horizontal keystone: Press the or to adjust ...

Page 23 - Advance

23 ... English User Controls 4 Windows : The input source will be compacted in the center with scaling. 4 4:3 : The input source will be scaled to fit the projection screen. 4 16:9 : The input source will be scaled to fit the width of the screen. 4 Letterbox: Letterbox mode zooms a letterboxed image...

Page 24 - Volume

24 English ... User Controls Audio Volume 4 Press the to decrease the volume. 4 Press the to increase the volume. Treble The treble setting controls the higher frequencies of your audiosource. 4 Press the to decrease the treble. 4 Press the to increase the treble. Bass The Bass setting controls the ...

Page 25 - Menu Location; Projection; Lamp

25 ... English Menu Location Choose the menu location on the display screen. Projection 4 Front-Desktop The factory default setting. 4 Rear-Desktop When you select this function, the projector reverses the imageso you can project behind a translucent screen. 4 Front-Ceiling When you select this func...

Page 26 - Source Lock

26 English ... Management 4 Lamp Reminding: Select this function to show or hide thewarning message when the lamp replacing reminder messageis displayed. The message will show up when the lamp reaches1500 hours at normal mode. See “Replacing the Lamp” for moredetails. 4 Lamp Hours: Display the cumul...

Page 27 - Source Change; Swap; PIP

27 ... English PIP Choose “On” to select on the PIP screen. Position Choose the PIP screen position on the display screen. Source Change Choose the input source of the projector on the PIP screen. Swap Choose “On” to swap main screen and PIP screen each other. PIP User Controls PIP Position Source c...

Page 28 - Appendices; Troubleshooting; contact your local reseller or service center.

28 English ... Appendices Problem: No image appears on screen. 4 Ensure all the cables and power connections are correctly andsecurely connected as described in the “Installation” section. 4 Ensure the pins of connectors are not crooked or broken. 4 Check if the projection lamp has been securely ins...

Page 30 - Problem: The image is outstretched when displaying 16:9; Problem: Lamp burns out or makes a popping sound; Problem: LED lighting message

30 English ... Problem: The image is outstretched when displaying 16:9 DVD. The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting. If the image is still outstretched, you will also need to adjust the aspect ratio by referring ...

Page 31 - Problem: Message Reminders

31 ... English Appendices Problem: Message Reminders 4 Standby : Wait 2 minutes before you can switch on again Press Power key again to confirm Press OK key to move this warning 4 Over Temperature : The projector will switch off automatically. Please: 1 Allow cool down for 3 minutes 2 Make sure air ...

Page 32 - Replacing the lamp; The projector will detect the lamp life itself. It will show you a; Lamp Changing Procedure:

32 English ... Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message “Lamp life exceed” When you see this message, change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. Warni...

Page 33 - Compatibility Modes

33 ... English VES A V GA 640 x 350 70 31.5 70 31.5 VES A V GA 640 x 350 85 37.9 85 37.9 VES A V GA 640 x 400 85 37.9 85 37.9 VES A V GA 640 x 480 60 31.5 60 31.5 VES A V GA 640 x 480 72 37.9 72 37.9 VES A V GA 640 x 480 75 37.5 75 37.5 VES A V GA 640 x 480 85 43.3 85 43.3 VES A V GA 720 x 400 70 31...

Page 34 - Ceiling Mount Installation; To prevent damaging your projector, please use the ceiling; Maximum screw length: 6mm

34 English ... 126.00 63.00 111.00 40.00 66.00 (To Lens Center) 83.75 396.60(Min.)/596.60(Max.) Please note that damage resulting fromincorrect installationwill invalidate thewarranty. Appendices Ceiling Mount Installation 1. To prevent damaging your projector, please use the ceiling mount package...

OPTOMA EP759 - Manual

Table of Contents:

Summary

Other OPTOMA Models