Page 2 - English; Usage Notice; Table of Contents
1 English Usage Notice Precautions .......................................................................................... 2 Introduction Product Features .................................................................................. 3 Package Overview ...........................................
Page 3 - Precautions; Do not look into the lens. The bright light may hurt your eyes.
2 English Precautions Follow all warnings, precautions and maintenance as recommended in thisuser’s manual to maximize the life of your unit. Do: q Turn off the product before cleaning. q Use a soft cloth moistened with mild detergent to clean the display housing. q Disconnect the power plug from AC...
Page 4 - Product Features; This product, is an SVGA single chip 0.7” DLP; Introduction
3 English Product Features This product, is an SVGA single chip 0.7” DLP ä Projector. The outstanding features of it are listed as follows: q True SVGA, 800 x 600 addressable pixels q 3.3 lbs. (1.5 kgs) lightweight compact design q Single chip DLP ä technology q XGA compression and VGA, SVGA re-sizi...
Page 5 - Package Overview
4 English Package Overview This projection display comes with all the items shown below. Check to makesure your unit is complete. Contact your dealer immediately if anything ismissing. Projection Display Power Cord S-Video Cable RCA Audio Cable VGA Signal Cable Remote Control Carrying Case Warranty ...
Page 6 - Product Overview; Connection Ports
5 English Product Overview Speaker Focus Ring Remote ControlReceiver Zoom Ring Zoom Lens Power Connector Elevator Button Connection Ports HDTV/Component Video & Computer Input Connector S-video Input Connector Audio Input Connector Composite Video Input Connector Panel Control Power On / Standby...
Page 7 - Remote Control
6 English Remote Control Source Resync Reset Freeze Keystone Correction Power / Standby Volume ( + / - ) Mute Four Directional Select Keys Enter Menu Zoom In / Zoom Out
Page 8 - Connecting the Projector; Installation
7 English Connecting the Projector Installation v To ensure the projector works well with your computer, please configurethe display mode of your graphic card to make it less than or equal to 800 X 600resolution. Make sure timimg of the display mode is compatible with the projector.Refer to the“Comp...
Page 9 - Powering On the Projector; And press the “Power/Standby” button; on the Remote Control or Panel Control to switch.; Power On/Off the Projector
8 English u u u u u Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. 3. The “Power/Standby” indicator will flash. And press the “Power/Standby” button again to start on your projector. The startup screen will display for 20 ...
Page 10 - Powering Off the Projector; Press the “Power/Standby” button to turn off the projector lamp.
9 English u u u u u Powering Off the Projector 1. Press the “Power/Standby” button to turn off the projector lamp. 2. After pressing the “Power/Standby” button, you will see a message “Power off the lamp?” on the on-screen display. Press the “Power/Standby” button again to confirm.Otherwise the mess...
Page 11 - Adjusting the Projected Image; Adjusting the Projector Height; To raise the projector:; Press the elevator button; To lower the projector:
10 English Adjusting the Projected Image u u u u u Adjusting the Projector Height The projector is equipped with an elevator foot for adjusting the projector height. To raise the projector: 1. Press the elevator button . 2. Raise the projector to the desired display angle , then release the butt...
Page 12 - Adjusting the Projector Zoom / Focus
11 English . x a M " 5 2 " 8 9 " 3 2 1 " 7 9 1 " 6 4 2 " 0 0 3 . n i M " 0 2 " 2 8 " 2 0 1 " 3 6 1 " 4 0 2 " 5 4 2 ) H x W ( . x a M " 0 . 5 1 x " 0 . 0 2 " 8 . 8 5 x " 4 . 8 7 " 8 . 3 7 x " 4 . 8 9 " 2 . 8 1 1 x " 6 . 7...
Page 13 - Panel Control & Remote Control; User Controls; Source
12 English Panel Control & Remote Control There are two ways for you to control the functions: Remote Control and Panel Control. User Controls Power / Standby 4 Refer to the “Power On/Off the Projection Display” section on page 8~9. Source 4 Press “Source” to choose RGB, Digital RGB, S-Video and...
Page 14 - when you press this button while the OSD is displayed.
13 English Use the Panel Control 4 Automatically synchronizes the projector to the input source, when you press this button while the OSD isn’t displayed. Four Directional Select Keys 4 Use or to select items. Use or to make adjustments for your selection. M e n u 4 Press “Menu” to open the on-scree...
Page 15 - On-Screen Display Menus; How to operate
14 English 4 The Projector has a multilingual On-Screen Display(OSD) menu that allows you to make image adjustments and change a variety of settings. In computer source, the OSD will be the “Computer OSD”. In video source, the OSD will be the “ Video OSD”. The projector will detect the source automa...
Page 16 - Computer mode
15 English 4 Brightness Adjusting the brightness of the image. l Press the to darken the image. l Press the to lighten the image. 4 Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and wh...
Page 17 - Video mode
16 English 4 Brightness Adjusting the brightness of the image. l Press the to darken the image. l Press the to lighten the image. 4 Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and wh...
Page 19 - Keystone Correction; Color Temperature
18 English Audio Image-I Image-II Language Management Keystone 16:9 / 4:3 Color Temp. Reset Yes No Video mode Image-II (Video mode) 4 Keystone Correction Adjusts image distortion caused by tilting the projector. 4 16 : 9 / 4 : 3 You can select this function to fit your desired aspect ratio type. 4 C...
Page 20 - Computer / Video mode
19 English 4 Volume l Press the to decrease the volume. l Press the to increase the volume. 4 Treble The treble setting controls the higher frequencies of your audio source. l Press the to decrease the treble. l Press the to increase the treble. 4 Bass The Bass setting controls the lower frequencies...
Page 21 - Projection; Signal Type; Lamp Reminder; Management
20 English 4 Menu Location Choose the Menu location on the display screen. 4 Projection l Front-Desktop The factory default setting. l Rear-Desktop When you select this function, the projector reverses the image so you can project behind atranslucent screen. l Front-Ceiling When you select this func...
Page 22 - Troubleshooting; Appendices
21 English Problem: No image appears on screen. 4 Ensure all the cables and power connections are correctly and securely connectedas described in the “Installation” section. 4 Ensure the pins of connectors are not crooked or broken. 4 Check if the projection lamp has been securely installed. Please ...
Page 23 - Problem: Image is unstable or flickering
22 English 4 If you are using a Notebook PC: 1. You are required to implement above steps of resolution setting of computer first. 2. Switch the Notebook PC display to the “external display only” or “CRT only” mode. 4 If you are experiencing difficulty in changing resolutions or your monitor freezes...
Page 24 - Problem: Lamp burns out or makes a popping sound; “Changing the Lamp”
23 English Problem : The screen is outstretched when displaying 16:9 DVD.The projector itself will automatically detect 16:9 DVD and adjust the aspect ratio by digitiza-tion to full screen with 4:3 default setting. If the projector is still outstretched, you will also need to adjust the aspect ratio...
Page 25 - Changing the lamp; Lamp Changing Procedure:; Turn off the power to the projector by
24 English Changing the lamp The projection display will detect the lamp life itself. It will show you a warningmessage “ Lamp is running out of standard lifetime. Be sure to replace the lamp assoon as possible.”. When you see this message, change the lamp as soon aspossible. Make sure the projector...
Page 26 - Specifications
25 English Specifications Light Valve - Single Chip DLP TM Technology Contrast Ratio - 500:1 (Full On / Full Off) Lamp - 130W User Replaceable P-VIP Lamp Number of Pixels - 800 pixels(H) X 600 lines(V) Displayable Color - 16.7M colors Projection Lens - F2.2~2.4 f=28.51~34.21mm with 1.2 x zoom & ...
Page 27 - Compatibility Modes
26 English A G V A S E V 0 5 3 X 0 4 6 0 7 5 . 1 3 A G V A S E V 0 5 3 X 0 4 6 5 8 9 . 7 3 A G V A S E V 0 0 4 X 0 4 6 0 7 5 . 1 3 A G V A S E V 0 0 4 X 0 4 6 5 8 9 . 7 3 A G V A S E V 0 8 4 X 0 4 6 0 6 5 . 1 3 A G V A S E V 0 8 4 X 0 4 6 2 7 9 . 7 3 A G V A S E V 0 8 4 X 0 4 6 5 7 5 . 7 3 A G V A S...
