OPTOMA DS216 - Manual - manualsarea.com

Page 2 - English; Usage Notice; Safety Information; Class B emissions limits

2 English Usage Notice Safety Information The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to p...

Page 3 - Precautions; Please follow all warnings, precautions and

3 English Usage Notice  When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp” section on pages 40-41. Precautions Please follow all warnings, precautions an...

Page 5 - Eye Safety Warnings; Product Features; VGA monitor Loop Through; Technology

5 English Usage Notice Eye Safety Warnings ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀ ■ In...

Page 6 - Introduction; Package Overview; Unpack and inspect the box contents to ensure

6 English Introduction Power Cord 1.8 m IR Remote Control Package Overview Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact your nearest customer service center. Documentation :  User’s Manual  Warranty Card  Quick Start ...

Page 7 - POWER button and; Main Unit; Product Overview

7 English Introduction 1. POWER button and LED indicator 2. Ventilation (inlet) 3. Zoom Ring 4. Focus Ring Main Unit Product Overview 5. Zoom Lens 6. IR Receiver 7. Ventilation (outlet) 8. Input / Output Connections 9. Power Socket 3 5 1 7 2 7 2 8 9 6 4 Downloaded From projector-manual.com Optoma Ma...

Page 8 - Input / Output Connectio; Lock Port; The items below are only for models that operate

8 English Introduction Input / Output Connectio VGA1-IN/SCART VGA2 - IN VGA-OUT S-VIDEO RS232 VIDEO 4 3 2 1 5 8 7 6 1. VGA1-In/SCART Connector (PC Analog Signal/Component Video Input/HDTV/SCART/ YPbPr) 2. S-Video Input Connector3. Composite Video Input Connector4. RS-232 Connector (3-pin)5. Power So...

Page 9 - Remote Control

9 English Introduction Remote Control 1. LED Indicator 2. Power On/Off 3. No Function on this model 4. No Function on this model 5. Four Directional Select Keys 6. Re-Sync 7. No Function on this model 8. No Function on this model 9. Zoom 10. AV mute 11. Video 12. VGA 13. Freeze 14. S-Video 15. Contr...

Page 10 - Using the Remote Control

10 English Introduction Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 13-14. Confirm your item selection. Source Press “SOURCE” to select an input signal. Re-SYNC Automatically synchronizes the projector to the input source. Four Directional Select Keys Us...

Page 11 - Installation; Connecting the Projector; Connect to Computer/Notebook

11 English Installation VGA1-IN/SCART VGA2 - IN VGA-OUT S-VIDEO RS232 VIDEO E62405SP R Connecting the Projector  Due to the difference in applications for each country, some regions may have different accessories.  (*) Optional accessory Connect to Computer/Notebook 1 3 1.............................

Page 12 - Connect to Video Sources

12 English Installation VGA1-IN/SCART VGA2 - IN VGA-OUT S-VIDEO RS232 VIDEO E62405SP R Connect to Video Sources 1....................................................................................................Power Cord 2..............................................................................

Page 13 - Powering On the Projector; The first time you use the projector, you can select your; Powering On/Off the Projector

13 English Installation Powering On the Projector 1. Securely connect the power cord and signal cable. When connected, the Power LED will turn Red. 2. Turn on the lamp by pressing “POWER” button either on the top of the projector or on the remote. The Power LED will now turn Blue.  The startup scre...

Page 14 - Powering Off the Projector; Press the “POWER” button again to confirm, otherwise; Warning Indicator

14 English Installation Powering Off the Projector 1. Press the “POWER” button to turn off the projector lamp. The following message will be displayed on the screen. Press the “POWER” button again to confirm, otherwise the message will disappear after 15 seconds. When you press the “POWER” button a ...

Page 15 - Adjusting the Projected Image; Adjusting the Projector’s Height; The projector is equipped with elevator feet for; Locate the adjustable foot you wish to modify on the

15 English Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the three adjustable rings counter clockwi...

Page 16 - Adjusting the Projector’s Zoom / Focus; Focus Ring; Adjusting Projection Image Size

16 English Installation Adjusting the Projector’s Zoom / Focus Focus Ring Zoom Ring You may turn the zoom ring to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 3.3 to 39.4 feet (1.0 to 12.0 meters). Adjusting Projection...

Page 17 - User Controls; The Projector has multilingual On-screen Display menus that; How to operate; On-screen Display Menus

17 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “MENU” on the Remote Control. 2 When OSD is dis...

Page 18 - Menu Tree

18 English User Controls Menu Tree (QJOLVK (QDEOH'LVDEOH 9LGHR 0HQX/RFDWLRQ 6LJQDO 6HFXULW\ 3URMHFWRU,' ',63/$< 9.H\VWRQH 6(783 =RRP +,PDJH6KLIW9,PDJH6KLIW (QJOLVK'HXWVFK)UDQ©DLV,WDOLDQR(VSD³RO3RUWXJX¬V 3ROVNL1HGHUODQGV̷͚͑͘͘͏͐6XRPL6YHQVND 1RUVN'DQVNˢ˨˨ˤ˪˦˧˙0DJ\DU ÎHģWLQD7¾UN©H 丏⇢₼㠖僐浣₼㠖㡴㦻崭뼑霢꽩ࡷࡎ࡙᧒...

Page 19 - IMAGE; Display Mode

19 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images.  Presentation: Good color and brightness from PC input.  Bright: Maximum brightness from PC input.  Movie: For home theater.  sRGB: Standardised accurate color.  Blackboard: This mo...

Page 20 - Contrast

20 English User Controls IMAGE Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.  Press the to decrease the contrast.  Press the to increase the contrast. Sharpne...

Page 21 - Degamma; BrilliantColorTM

21 English User Controls IMAGE | Advanced Degamma This allows you to choose a degamma table that has been fine-tuned to bring out the best image quality for the input.  Film: for home theater.  Video: for video or TV source.  Graphics: for image source.  PC: for PC or computer source. BrilliantC...

Page 22 - Color; Reset; Input Source

22 English User Controls Advanced |Color Color Use these settings for advanced adjustment of the individual Red, Green, Blue, Cyan, Magenta and Yellow Colors. Reset Choose “Yes” to return the factory default settings for color adjustments. Advanced | Input Source Input Source Use this option to enab...

Page 23 - DISPLAY; Format

23 English User Controls DISPLAY Format Use this function to choose your desired aspect ratio.  4:3: This format is for 4×3 input sources.  16:9-I: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV.  16:9-II: This format is for 16×9 input sources, like HDTV and ...

Page 25 - Overscan

25 English User Controls Overscan Overscan function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source. Zoom  Press the to reduce the size of an image.  Press the to magnify an image on the projection screen. H Image Shift Shift the pr...

Page 26 - Language

26 English User Controls Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to finalize the selection. SETUP | Language Downloaded From projector-manual.com Optoma Manuals

Page 27 - SETUP; Projection; Menu Location; Projector ID

27 English User Controls SETUP Projection  Front-Desktop This is the default selection. The image is projected straight on the screen.  Rear-Desktop When selected, the image will appear reversed.  Front-Ceiling When selected, the image will turn upside down.  Rear-Ceiling When selected, the imag...

Page 28 - Automatic; Phase

28 English User Controls SETUP | Signal Automatic Automatically selects the singal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not auto - matic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time ...

Page 29 - Security; Security Timer

29 English User Controls SETUP | Security Security  On: Choose “On” to use security verification when the turning on the projector.  Off: Choose “Off” to be able to switch on the projector without password verification. Security Timer Can be select the time (Month/Day/Hour) function to set the num...

Page 30 - Change Password

30 English User Controls SETUP | Security Change Password  First time:1. Press “ ” to set the password.2. The password has to be 4 digits. 3. Use number button on the remote to enter your new password and then press “ ” key to confirm your password.  Change Password:1. Press “ ” to input old passw...

Page 31 - Logo

31 English User Controls SETUP | Advanced Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on.  Optoma: The default startup screen.  Neutral: No logo is displayed. Downloaded From projector-manual.com Optoma ...

Page 32 - Source Lock; High Altitude; OPTIONS

32 English User Controls Source Lock  On: The projector will search specified connection port.  Off: The projector will search for other signals if the current input signal is lost. High Altitude When “On” is selected, the fans will spin faster. This feature is useful in high altitude areas where ...

Page 33 - Advanced; Direct Power On; Power mode

33 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without press- ing “POWER” button either on the top of the projector or on the remote. Auto Power Off (min) Sets the countdown t...

Page 34 - Lamp Settings; Lamp Hours

34 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Brightness Mode  STD...

Page 35 - Appendices; Image Problems; No image appears on-screen; Troubleshooting; If you experience a problem with your projector,

35 English Appendices Image Problems No image appears on-screen  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure all the pins of connectors are not bent or broken.  Check if the projection lamp has been securely ...

Page 36 - The screen of the Notebook or PowerBook computer is not

36 English Appendices 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. Verify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 × 1200).  If you are using a No...

Page 37 - Image is out of focus; The image is stretched when displaying 16:9 DVD title

37 English Appendices Image is out of focus  Adjust the Focus Ring on the projector lens.  Make sure the projection screen is between the required distance 3.3 to 39.4 feet (1.0 to 12.0 meters) from the projector. See page 16. The image is stretched when displaying 16:9 DVD title  When you play a...

Page 38 - Other Problems; The projector stops responding to all controls; Lamp burns out or makes a popping sound; Projector Status Indication; LED lighting message

38 English Appendices Other Problems The projector stops responding to all controls  If possible, turn off the projector, then unplug the power cord and wait at least 60 seconds before reconnecting power. Lamp burns out or makes a popping sound  When the lamp reaches its end of life, it will burn ...

Page 39 - On Screen Messages; Remote Control Problems; If the remote control does not work

39 English Appendices On Screen Messages  Temperature warning:  Fan failed:  Lamp warning:  Out of display range: Remote Control Problems If the remote control does not work  Check the operating angle of the remote control is within ±15° both horizontally and vertically of one of the IR receive...

Page 40 - Replacing the lamp

40 English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make s...

Page 41 - Lamp Replacement Procedure:

41 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “POWER” button. 2. Allow the projector to cool down for at least 30 minutes.3. Disconnect the power cord.4. Unscrew the two screws on the cover. 15. Lift up and remove the cover. 2 6. Unscrew t...

Page 42 - Compatibility Modes; Mode; Computer Compatibility

42 English Appendices Compatibility Modes Mode Resolution V-Sync (Hz) H-Sync (KHz) VGA 640 × 480 60 31.50 VGA 640 × 480 72 37.90 VGA 640 × 480 75 37.50 VGA 640 × 480 85 43.30 VGA 720 × 400 70 31.50 VGA 720 × 400 85 37.90 SVGA 800 × 600 56 35.20 SVGA 800 × 600 60 37.90 SVGA 800 × 600 72 48.10 SVGA 80...

Page 43 - Video Compatibility

43 English Appendices  Video Compatibility NTSC NTSC M/J, 3.58MHz, 4.43 MHz PAL B/D/G/H/I/M/N, 4.43 MHz SECAM B/D/G/K/K1/L, 4.25/4.4 MHz SDTV 480i/p, 576i/p HDTV 720p(50/60Hz), 1080i(50/60Hz), 1080p(24/50/60Hz) Mode Resolution V-Sync (Hz) H-Sync (KHz) MAC LC 13” 640 × 480 66.66 34.98 MAC II 13” 640...

Page 44 - RS232 Pin Assignments

44 English Appendices RS232 Commands RS232 Pin Assignments Pin no. Spec. 1 N/A 2 RXD 3 TXD 4 N/A 5 GND 6 N/A 7 N/A 8 N/A 9 N/A 1 2 3 4 5 6 7 8 9 Pin no. Name I/O (From Projector Side) 1 TXD OUT 2 RXD IN 3 GND GND 1 2 3 Downloaded From projector-manual.com Optoma Manuals

Page 45 - RS232 Protocol Function List

45 English Appendices RS232 Protocol Function List RS232 Commands Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None 1. There is a <CR> after all ASCII commands. 2. 0D is the HEX code for <CR> in ASCII code. Optoma ES526L/EX536L RS232 Command Table --------------...

Page 48 - Ceiling Mount Installation

48 English Appendices  Please note that damage resulting from incorrect installation will invalidate the warranty. Ceiling Mount Installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws ...

Page 49 - Optoma Global Offices; For service or support please contact your local office.

49 English Appendices Optoma Global Offices For service or support please contact your local office. USA 715 Sycamore Drive Tel : 408-383-3700 Milpitas, CA 95035, USA Fax: 408-383-3702 www.optomausa.com Service : [email protected] Canada 5630 Kennedy Road, Mississauga, Tel : 905-361-2582 ON, L4Z 2...

Page 51 - Regulation & Safety notices; This appendix lists the general notices of your projector.; FCC notice

51 English Appendices Regulation & Safety notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonab...

Page 52 - Cet appareil numerique de la classe B est conforme a la; Disposal instructions; Do not throw this electronic device into the

52 English Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undes...

OPTOMA DS216 - Manual

Table of Contents:

Summary

Other OPTOMA Models