Optimus PRO-SW100P - Manual
Optimus PRO-SW100P – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY INSTRUCTIONS; CAUTION; : TO REDUCE THE RISK OF
- Page 3 – CHOOSING A LOCATION
- Page 4 – Connecting Speakers; If you use MEGACABLE; Right
- Page 7 – CARE AND MAINTENANCE; contain minerals that corrode electronic circuits.
- Page 8 – Printed in the USA; SPECIFICATIONS; Limited One-Year Warranty
Cat. No.
40-4080
PRO-SW100P 100-Watt Powered Subwoofer
Your Optimus PRO-SW100P 100-Watt
Powered Subwoofer is designed to
give you the best possible low fre-
quency sound quality for the ultimate
home theater experience. You will be
astonished by the realism it adds to
movie sound effects and the power it
lends to all kinds of music.
The subwoofer combines the power of
a built-in 100-watt RMS amplifier with
a responsive, 10-inch coated paper
cone woofer — all housed in a ported
bass-reflex enclosure to produce tight,
floor-rumbling, powerful bass (down to
42 Hz) that you can feel as well as
hear! The LED power indicator lets
you see at a glance when the sub-
woofer is operating.
Your subwoofer has an adjustable
high cut filter and high and low level in-
puts, making it easy to incorporate into
existing systems, or you can use it as
an integral part of a subwoofer/satellite
combination.
It also has these features:
Auto On/Off — Automatically switch-
es the PRO-SW100P’s amplifier to
standby if the subwoofer does not re-
ceive a signal for about 11 minutes.
Standby Indicator — Lights when the
subwoofer is connected to power but
not receiving a signal.
High Level Input — Lets you connect
the subwoofer to an amplifier’s or re-
ceiver’s speaker outputs.
High Level Output — Lets you con-
nect the subwoofer between an ampli-
fier or receiver (without line out
terminals) and other speakers.
Low Level Input — Lets you connect
the subwoofer to an amplifier’s or re-
ceiver’s line out jacks. These inputs
automatically sum left and right chan-
nel information.
Volume Control — Lets you match
the PRO-SW100P’s output level to
your satellite speakers’ output (if
used).
©
1998 Tandy Corporation.
All Rights Reserved.
Optimus, Megacable, and RadioShack are registered trademarks used by Tandy Corporation.
40-4080.fm Page 1 Wednesday, August 11, 1999 10:58 AM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Phase (Polarity) Switch — Invertsthe subwoofer’s output polarity so youcan set it to match the main speakers. FREQUENCY HZ — Controls the highfrequency cutoff point. Rotated fullyclockwise, it cuts high frequenciesover 200 Hz. Rotated fully counter-clockwise, it cuts high frequenciesover 50 Hz. Yo...
3 • Place the subwoofer away from heat sources such as radiators,stoves, or other appliances thatproduce heat. CHOOSING A LOCATION Cautions: • To prevent the cabinet from warp- ing or discoloring, do not place thesubwoofer in a place where it isexposed to direct sunlight orexcessive humidity. • Do n...
4 Caution: To avoid any damage to thesubwoofer or amplifier, disconnectpower from your components beforemaking any connections. Connecting to Line Out Terminals Your amplifier/receiver’s line out jacksmight be labeled either REC OUT or PRE OUT . 1. Connect the PRO-SW100P’s LOW LEVEL INPUT jacks to t...
