Optimus PRO LX10 - Manual
Optimus PRO LX10 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Strip the insulation from the ends
- Page 3 – MAINTENANCE
- Page 4 – SPECIFICATIONS; Limited Five-Year Warranty
© 1997 Tandy Corporation.
All Rights Reserved.
Optimus and RadioShack are registered trademarks used by Tandy Corporation.
Cat. No.
40-4067
PRO LX10 Dual-Woofer Tower Speaker
Important: Be sure you remove the
protective packing materials before
using the speaker (see the separate
“Special Precautions” included with
your speaker).
Your Optimus PRO LX10 Tower
Speaker’s internal elements were ex-
clusively designed to give you amaz-
ing music reproduction from a floor
speaker.
OPTIMUS
The LX10 produces high sound quality
with very low distortion, and actually
delivers decreasing distortion as the
sound moves to the higher frequency
ranges.
The 7-inch driver is specially designed
to accurately produce all sounds from
45 Hz to 2,200 Hz. The pliable dia-
phragm in the 2
×
4-inch driver can ac-
curately produce sounds from 2,200
Hz to 25,000 Hz with extraordinarily
low distortion. The tweeter’s unique
design means there is virtually no
physical limitation to its high-frequen-
cy sound production.
The speaker cabinet is finished in
black woodgrain vinyl. The black cloth
grilles are acoustically transparent,
and you can remove them for safe and
easy cleaning.
The LX10’s features include:
Acoustic Design — provides broad,
smooth frequency response.
360
°
Wide-Dispersion Tweeter —
reproduces frequencies over 20 kHz
and uses a pliable diaphragm to re-
duce or eliminate distortion caused by
excess vibration.
High-Compliance Woofer — accu-
rately tracks signals to provide out-
standing bass.
40-4067.fm Page 1 Wednesday, August 11, 1999 10:01 AM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SPEAKER PLACEMENT For the best stereo image, place a pairof speakers so the distance betweenthem is about the same as the dis-tance between the listening area andthe point halfway between the speak-ers. If you must place the speakers fartherapart, turn them slightly inward. If youmust place them c...
3 3. Turn the left speaker’s negative (–) terminal counterclockwise toloosen it, and insert one of theunmarked wire ends into theopening. Then turn the terminalclockwise to tighten it. Note: You can also use bananaplugs to make this connection. 4. Turn the left speaker ’s positive (+) terminal count...
RadioShack A Division of Tandy Corporation Fort Worth, Texas 76102 7A7 Printed in Malaysia SPECIFICATIONS Frequency Response .........................................................................................50-25,000 Hz Power Handling .............................................................
