Page 2 - Important
1 Important CONTENTS Important . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Name and Function of Each Part . . . . . . . . 2 Preparations for Use . . . . . . . . . . . . . . . . . 3 Instructions for Use . . . . . . . . . . . . . . . . . . 8 When Error Indication Symbols Appear . . 10 Specif...
Page 3 - Name and Function of Each Part; Main Unit
2 Name and Function of Each Part Air Jack Systolic Bood Pressure Display Diastolic Blood Pressure and Pulse Display Printing Paper Paper Cutter SPHYG/CLOCK Button START Button PRINT / PAPER FEED Button SET Button Tab Air Plug Air Tube MODE Selector Button Main Unit Cuff
Page 4 - Preparations for Use; How to insert the batteries
3 Preparations for Use 1 How to insert the batteries Battery Cover 1 . Take off the battery cover at the back of the main unit by sliding it in the direction indicated by the arrow symbol . Replacement • When the “Replace Batteries” symbol ( ) flashes during measurement, please replace the batteries...
Page 5 - How to Set Time and Date
4 Preparations for Use 2 How to Set Time and Date 3 Plug in and Turn on 1 . When batteries are installed, the display shows PM 12:00 . 1 . Insert the air plug into the air jack on the left side of the main unit correctly . 2 . When the SPHYG/CLOCK button is changed to the sphygmomanometer mode, all ...
Page 6 - How to Set the Printing Paper
5 Preparations for Use 4 How to Set the Printing Paper Please be sure not to print without inserting printing paper as it will shorten the life span of the printer head . 1 . Slide the plastic printer cover in the direction indicated by the arrow symbol and remove it from the main unit . 4 . Insert ...
Page 7 - Changing the Printer Ink
6 Preparations for Use 5 Changing the Printer Ink Though not originally equipped with an ink roller, the HEM-703CP digital blood pressure monitor contains enough printer ink to last about two years when used once a day at normal room temperature . When the ink on the print out becomes light and hard...
Page 8 - Attach the Cuff
7 about 1 inch Artery no space Preparations for Use 6 Attach the Cuff This cuff has eliminated the need for a microphone thereby lessening possible interference from vibrations and noise . Fitting also has been made much easier through the widening of the artery oscillation detection area . 1 . Plac...
Page 9 - Apply Pressure to the Cuff
8 Preparations for Use 7 Apply Pressure to the Cuff 1 . When you press the start button, the pump operates and pressure is applied . When the pressure reaches 170mmHg, the pump stops automatically . 2 . When the appropriate pressure has been reached, the air is automatically released and the value o...
Page 10 - Blood Pressure and Pulse are displayed
9 Measurement Completed Alternate Display Blood Pressure Reading Display (for approx . 3 seconds) Pulse Reading Display (for approx . 1 .5 seconds) *P: Stands for PULSE . Preparations for Use 8 Blood Pressure and Pulse are displayed When the deflation symbol begins to flash, the residual pressure in...
Page 11 - When Error Indication Symbols Appear
10 When Error Indication Symbols Appear The following special error symbols will appear in the display if the unit is being used incorrectly: ERROR SYMBOL CAUSE CORRECTION 1 . Cuff underinflated 1) Release air pressure in cuff 2) Wait 10 minutes before taking another reading . 3) Repeat “Instruction...
Page 12 - Specifications
11 Specifications Power Source: Battery (four type “AA” dry cell batteries) 6V 4W Measurement Method: Oscillometric Method Display: Liquid Crystal Digital Display Measurement Range: Pressure: 0 ~ 280mmHg Pulse: 40 ~ 200/minute Accuracy: Pressure: within ± 3 mmHg Pulse: within ± 5% reading Pressure D...
Page 14 - Limited One Year Warranty
13 Limited One Year Warranty YOUR OMRON MODEL HEM-713C Digital Blood Pressure Monitor is warranted to be free from manufacturing defects for a period of one year under normal use . This warranty extends only to the original retail purchaser .Should repair be needed, within the warranty period, ship ...