OmniMount TILT-PA - Manual
OmniMount TILT-PA – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Step 8 — Attaching the Tilt-PA to the Pipe; Tighten Here; Step 9 — Attaching the Adapter and Display to the Pipe Adapter; Note: Pipe removed for clarity
- Page 3 – Step 7 — Attaching the UM1 to the Display; Mounting; Important; Channel; Large Universal Adapter Component Guide
- Page 4 – Parts List; Nylock Jam Nut; Step 5 — Secure Sliders and Back Plate (continued)
- Page 5 – Step 4 — Rail Installation; Standard Configuration; Step 5 — Secure Sliders and Back Plate; Insert Stud
- Page 6 – Step 2 — Determine Rail Selection; Extended Rail Installation; Step 3 — Determine Width Configuration; Prior to adjustment, loosen Slider Retaining Screws.
12
To adjust tilt
1. Hold A with 3/4” Socket
2. Loosen B with 3/4” Socket
3. Loosen C with 9/16” Socket
4. Position Display
5. Tighten A,B, & C
C.
B.
A.
Step 10 — Adjusting Tilt
PN —9/05
Specifications are subject to change without prior notice.
Every effort has been made to provide accurate and error-free assembly and installation. Omni-
Mount Systems disclaims liability for any difficulties arising from the interpretation of information
contained in these instructions. If OmniMount products are used for purposes other than their
original intent, OmniMount, its distributors and retailers shall not be held responsible or liable for
injuries or property damage, direct, indirect, or consequential, which may arise from the inability
to use this product safely, properly, and in the manner for which it has been designed and manufac-
tured. Warranty does not apply to products which have been lost, damaged by misuse, abuse, or
accident.
Installation Instructions
TPUM-1: Tilting Pipe Adapter
•
Designed for 26” - 55” Flat Panel TV’s
•
Maximum Weight Capacity: 175 lbs. (79.4 Kg)
•
Connects to 1.5” NPT Pipe
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 11 Step 8 — Attaching the Tilt-PA to the Pipe 1. Thread and tighten Tilting Pipe Adapter onto 1.5” NPT Pipe (not included). 2. Tighten Tilt Tension Nut before attaching Adapter. Tighten Here Step 9 — Attaching the Adapter and Display to the Pipe Adapter 3. Align the space between the top Nuts with...
10 Step 7 — Attaching the UM1 to the Display 1. Thread Mounting Screw through Square Washer, Rail, Spacer (if needed), and into the Display’s Mounting Holes. Mounting Screw Display Spacer ( if needed ) Square Washer NOTE: Ensure Retaining Screws are loose enough to allow for adjustment 2. Center the...
4 ID Description Qty A Philips Screws M4 x 16mm 4 B Philips Screws M4 x 36mm 4 C Philips Screws M4 x 45mm 4 D Philips Screws M5 x 16mm 4 E Philips Screws M5 x 36mm 4 F Philips Screws M5 x 46mm 4 G Philips Screws M6 x 16mm 4 H Philips Screws M6 x 36mm 4 I Philips Screws M6 x 46mm 4 J Philips Screws M...
