Omega PST - Manual
Omega PST – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OPERATING INSTRUCTIONS; OUTPUT VOLTAGE ADJUSTMENT:; All OMEGA miniaturized power supplies
- Page 3 – COMMON POWER SUPPLY SPECIFICATIONS; See tables 1 and 2; OUTPUT VOLTAGE TRIM; See Figures 1 and 2; OUTPUT; TABLE 2; Figure 2. Dimensions For Screw Terminal Style; mA
- Page 4 – RETURN REQUESTS / INQUIRIES; Servicing North America:; OMEGAnet
PSP and PST Series
Power Supplies
INSTRUCTION
SHEET
M0252/0707
Shop online at: omega.com e-mail: [email protected]
For latest product manuals: omegamanual.info
INTRODUCTION
OMEGA
®
Power Supplies have outputs ranging from 5 to 28 volts, and from 40 mA to
500 mA (Refer to Tables 1 and 2). All styles feature excellent regulation and ripple
parameters, and are short circuit protected. Rugged encapsulated construction and
generously derated components insure years of reliable operation.
Two case styles are available for your installation needs. The pin terminal style can
either be soldered into a printed circuit board or plugged into a phenolic accessory
socket board with gold plated Teflon insulated contacts. The barrier strip type case is
designed to be mounted to a bulkhead or chassis using four 4-40 screws.
FEATURES
Pin Terminal Style
• No Derating or Heat Sinking Required
• Short Circuit Protected
• Small, Lightweight
• Completely Sealed Case
• Only 7 oz.
Screw Terminal Style
• 4-40 Screw Terminations and Mounting Inserts
• Floating Output
• Efficient
• Rugged
• 15 oz.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
OPERATING INSTRUCTIONS INPUT VOLTAGE: AC input models operate on 105-125 VAC, 47-420 Hz. (Models with an input of 210-250 VAC, 47420 Hz are available on specialorder). OUTPUT VOLTAGE ADJUSTMENT: Output(s) factory set to within +1% of the nominal output voltage rating. (AC input models having outputs...
COMMON POWER SUPPLY SPECIFICATIONS INPUT VOLTAGE: 105-125 V ac, 47 to 420 Hz, single phase OUTPUT: See tables 1 and 2 REGULATION: 0.05% line, 0.05% load RIPPLE: 0.5 mV rms OUTPUT VOLTAGE TRIM ADJUSTMENT: Output is factory preset to ± 2% (1 to 9 voltmodels) or ± 1 1% (10 to 75 volt models) ofnominal ...
It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuingcertification of its products to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification. The inform...
