Omega OME-PIO-D96 - Manual - manualsarea.com

Page 2 - OMEGAnet

Servicing North America: USA: One Omega Drive, P.O. Box 4047 ISO 9001 Certified Stamford CT 06907-0047TEL: (203) 359-1660 FAX: (203) 359-7700 e-mail: [email protected] Canada: 976 BergarLaval (Quebec) H7L 5A1, CanadaTEL: (514) 856-6928 FAX: (514) 856-6886 e-mail: [email protected] For immediate technical o...

Page 3 - User Manual

OME-PIO-D96 User Manual OME-PIO-D96 User Manual (Ver.1.1, Mar/2003, PPH-008-11) ---- 1

Page 4 - Table of Contents

Table of Contents 1. INTRODUCTION ........................................................................................................................... 3 1.1 F EATURES .................................................................................................................................

Page 6 - Specifications; Order Description

1.2 Specifications • All inputs are TTL compatible Logic high voltage: 2.4V (Min.) Logic low voltage: 0.8V (Max.) • All outputs are TTL compatible Sink current: 64mA (Max.) Source current: 32mA (Max.) • Environmental : Operating Temperature: 0 ° C to 60 ° C Storage Temperature: -20 ° C to 80 ° C Hum...

Page 8 - Hardware configuration

2. Hardware configuration 2.1 Board Layout CN1 PCI BUS CN2 CN3 CN4 OME- PIO-D96 port0 port1 port2 port3 port4 port5 port6 port7 port8 port 9 port10 port11 OME-PIO-D96 User Manual (Ver.1.1, Mar/2003) ---- 6

Page 11 - Interrupt Operation; inverted

2.5 Interrupt Operation All P2C0, P5C0, P8C0 and P11C0 can be used as interrupt signal sources. Refer to Sec. 2.1 & Sec. 2.7 for P2C0/P5C0/P8C0/P11C0 location. The interrupt of OME-PIO-D96 is level-trigger & Active_High . The interrupt signal can be inverted or non-inverted programmable. The...

Page 16 - .5 Muliti Interrupt Source

2. 5 .5 Muliti Interrupt Source Assume: P2C0 is initial Low, active High, P5C0 is initial High, active Low P8C0 is initial Low, active High P11C0 is initial High, active Low as follows: P5C0 P2C0 P8C0 P11C0 P2C0 & P5C0 are return to normal at the same time. P8C0 & P11C0 are return to normal ...

Page 18 - Daughter Boards

2.6 Daughter Boards 2.6.1 OME-DB-37 The OME-DB-37 is a general purpose daughter board for D-sub 37 pins. It is designed for easy wire connection. 2.6.2 OME-DN-37 & OME-DN-50 The OME-DN-37 is a general purpose daughter board for D- sub 37 -pin connector . The OME-DN- 50 is designed for 50-pin fla...

Page 23 - Daughter Boards Comparison Table

2.6.8 Daughter Boards Comparison Table 20-pin flat-cable 50-pin flat-cable D-sub 37-pin OME-DB-37 No No Yes OME-DN-37 No No Yes OME-ADP-37/PCI No Yes Yes OME-ADP-50/PCI No Yes No OME-DB-24P No Yes No OME-DB-24PD No Yes Yes OME-DB-16P8R No Yes Yes OME-DB-24R No Yes No OME-DB-24RD No Yes Yes OME-DB-24...

Page 24 - Pin Assignment; All signals are TTL compatible.

2.7 Pin Assignment CN1: 37 pin of D-type female connector. (For Port0, Port1, Port2) Pin Number Description Pin Number Description 1 N. C. 20 VCC 2 N. C. 21 GND 3 P1B7 22 P2C7 4 P1B6 23 P2C6 5 P1B5 24 P2C5 6 P1B4 25 P2C4 7 P1B3 26 P2C3 8 P1B2 27 P2C2 9 P1B1 28 P2C1 10 P1B0 29 P2C0 11 GND 30 P0A7 12 ...

Page 35 - Interrupt Polarity Control Register

3.3.6 Interrupt Polarity Control Register (Read/Write): wBase+0x2A Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 0 0 0 0 INV3 INV2 INV1 INV0 Note. Refer to Sec. 3.1 for more information about wBase. INV0=1 Æ select the non-inverted signal from P2C0 INV0=0 Æ select the inverted signal from P2C0 out...

Page 50 - RETURN REQUESTS/INQUIRIES

WARRANTY/ DISCLAIMER OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for aperiod of 13 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping...

Omega OME-PIO-D96 - Manual

Table of Contents:

Summary

Other Omega Models