Omega OCG64X - User Manual - manualsarea.com

Page 3 - SECTION PAGE NO.

CONGRATULATIONS Welcome to the Omega Kitchen Community and thank you for choosing one of our many fantastic cooking appliances. We are confident that you will now be able to meet your cooking needs. Before you use the cooktop we strongly recommend that you read though the whole user manual which pro...

Page 4 - IMPORTANT SAFETY INSTRUCTIONS; IMPORTANT; Do not place heavy objects on this appliance.; SUPPLIED WITH THIS APPLIANCE

IMPORTANT SAFETY INSTRUCTIONS IMPORTANT : Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. 1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilitie...

Page 5 - APPLIANCE DETAILS; Semi-rapid Burner Semi-rapid Burner

APPLIANCE DETAILS Gas Type: ULPG NG Burner Pressure: 2.75 kPa 1.00 kPa Injector Diameter MJ/hr Rating Injector Diameter MJ/hr Rating Auxiliary Burner Ø0.55 mm 4.0 MJ/ hr Ø0.90 mm 4.5 MJ/ hr Semi-Rapid Burner Ø0.70 mm 6.75 MJ/ hr Ø1.10 mm 6.0 MJ/ hr Wok Burner Ø0.98 mm 13.0 MJ/ hr Ø1.70 mm 13.0 MJ/ h...

Page 6 - GAS CONNECTIONS; LOCAL AUTHORITY REQUIREMENTS

GAS CONNECTIONS LOCAL AUTHORITY REQUIREMENTS Check Gas Type and specifications plate placed on the bottom face of the unit. All gas fitting work, service and repairs can only be performed by an authorized person in accordance with the current edition of AS/NZS5601 and local gas regulations. Failure ...

Page 7 - Turn the screw “A” to the correct setting with a screwdriver.; LUBRICATION OF THE GAS TAPS; Make sure gas control knobs are; Off; and turn the cylinder valve; On

CHECKING THE BURNER PRESSURE Natural Gas (the appliance test point is located at the regulator). The supplied regulator must be fitted to the appliance inlet connection. The gas pressure must be adjusted to 1.0kPa when approximately 50% of the burners are on high. Universal LPG (the appliance test p...

Page 8 - ELECTRICAL CONNECTIONS; —connect the brown wire to the terminal marked with the; INSTALLATION; Note

ELECTRICAL CONNECTIONS LOCAL AUTHORITY REQUIREMENTS Installation is only permitted by an authorized person, and carried out according to instructions provided by the manufacturer. Incorrect installation might cause harm and damage which the manufacturer accepts no responsibility. The electrical conn...

Page 10 - OPERATING INSTRUCTIONS; IGNITING THE BURNERS

OPERATING INSTRUCTIONS IGNITING THE BURNERS The knob on your gas cooktop controls both ignition and the safety device. Proceed as follows to ignite the burners: Press down & turn the knob for the burner you would like to use. Keep the knob strongly pressed in for approximately 1 second to allow ...

Page 11 - WOK BURNER MAINTENACE & ASSEMBLY; The four holes around the outside of the crown must always be kept; MAINTENANCE; Check injectors are not blocked; Fault

WOK BURNER MAINTENACE & ASSEMBLY When fitting the wok burner together, it is very important to check that the burner flame distributor (F) and the cap (C) are correctly positioned (fig. 6). Failure to do so can cause problems with ignition and also the way in which the burner operates. Check tha...

Omega OCG64X - User Manual

Table of Contents:

Summary

Other Omega Hobs Models