Omega OCG604XCOM - User Manual

Page 2 - Thank you for purchasing an Omega appliance; welcome addition to the family.; Further Information; and specifications please visit; Registering Your Warranty; For peace of mind you can register your warranty at; Contact Us

2 Thank you for purchasing an Omega appliance Tailored for the modern aesthetic and lifestyle of busy people, your new Omega Appliance will make a welcome addition to the family. Omega caters to style-savvy customers who look for balance between stunning form and clever function. This means a combin...

Page 3 - Contents

3 READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE. It is important that you retain these instructions, proof of purchase as well as other important documents about this product for future reference. The manufacturer will not be responsible for any damage to property or to pers...

Page 4 - Important Safety Warnings; IMPORTANT; Do not place heavy objects on this appliance.; DO NOT; DO NOT; DO NOT; SUPPLIED WITH THIS APPLIANCE:

4 Important Safety Warnings IMPORTANT : Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. 1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,...

Page 5 - Appliance Details

5 Appliance Details Gas Type: ULPG NG Burner Pressure: 2.75 kPa 1.00 kPa Injector Diameter MJ/hr Rating Injector Diameter MJ/hr Rating Auxiliary Burner Ø0.55 mm 4.0 MJ/ hr Ø0.90 mm 4.0 MJ/ hr Semi-Rapid Burner Ø0.70 mm 6.3 MJ/ hr Ø1.10 mm 6.0 MJ/ hr Wok Burner Ø0.98 mm 13.0 MJ/ hr Ø1.70 mm 13.0 MJ/ ...

Page 7 - REGULATING THE BURNER MINIMUM SETTING; Turn the screw “A” to the correct setting with a screwdriver.; LUBRICATION OF THE GAS TAPS; Off

7 This operation can only be performed by an authorized person. Remove the gratings and the burner covers; Using a spanner, replace the nozzle injectors “J” (Fig.20) with either Natural Gas sized injectors or LPG sized injectors. Ensure you replace the corresponding gas type label on the appliance a...

Page 8 - UNIVERSAL LPG –; not

8 Test And Adjusting Gas Pressure NATURAL GAS – Appliance test point located at the regulator The supplied regulator must be fitted to the appliance inlet connection. Gas pressure must be adjusted to 1.0 kPa when approximately 50% of the burners are on a high setting. UNIVERSAL LPG – Appliance test ...

Page 9 - INSTALLATION; Note; INSTALLATION IN KITCHEN CABINET WITH DOOR

9 Electrical Connections LOCAL AUTHORITY REQUIREMENTS Installation is only permitted by an authorized person, and carried out according to instructions provided by the manufacturer. Incorrect installation might cause harm and damage which the manufacturer accepts no responsibility. The electrical co...

Page 11 - the gas is turned on and that the electrodes are sparking.; USING THE BURNERS; time and is more efficient.; AUTOMATIC SAFETY VALVES

11 Operating Instructions IGNITING THE BURNERS The knob on your gas cooktop controls both ignition and the safety device. Proceed as follows to ignite the burners: Press down & turn the knob for the burner you would like to use. Keep the knob strongly pressed in for approximately 1 second to all...

Page 13 - Maintenance; Check injectors are not blocked and; Fault

13 Maintenance Clean burner tops and trivets at least once a week, or after any spillage. Check injectors are not blocked and the electrode and probe are clean. Gas inlet pipes should be checked periodically for leakages (see section on leak testing) a minimum of every 12 months. Lubrication of gas ...

Page 14 - Notes / Service History