Omega DRA-RTM-8 - Manual
Omega DRA-RTM-8 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OMEGAnet
- Page 3 – Contents
- Page 4 – GENERAL DESCRIPTION; WARNING: Never install a fuse rated more than 800mA; MOUNTING INSTRUCTIONS; To replace a blown fuse, disassemble the unit as follows:
- Page 5 – CONNECTING TRANSMITTERS TO THE MULTIPLEXER; TWO WIRE TRANSMITTER
- Page 8 – to alter these calibration potentiometers.; CALIBRATION PROCEDURE; h. Repeat this procedure until satisfactory results are obtained.
- Page 9 – * The calibrator is set according to DIN 43760 Pt-100 table (; CALIBRATION TABLES; ZERO TEMP; i. Change the address to the next channel to be calibrated.
- Page 10 – MULTIDROP CONFIGURATION
- Page 11 – RETURN REQUESTS / INQUIRIES
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
USA and Canada: Sales Service: 1-800-826-6342 / 1-800-TC-OMEGASMCustomer Service: 1-800-622-2378 / 1-800-622-BESTSMEngineering Service: 1-800-872-9436 / 1-800-USA-WHENS MTELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA Mexico andLatin America: Tel: (95) 800-TC-OMEGASM FAX: (95) 203-359-7807 En Espanol:...
Contents 1. GENERAL DESCRIPTION 2. MOUNTING INSTRUCTIONS 3. REPLACING FUSES 4. ASSEMBLY 5. CURRENT INPUTS 6. CONNECTING TRANSMITTERS TO THE MULTIPLEXER 7. CONNECTING Pt-100 TO THE MULTIPLEXER 8. CONNECTING THE MULTIPLEXER TO A PLC 9. CONTROL 9.1 Enable 9.2 Address 9.3 Address Polarity 9.4 Control Ta...
1. GENERAL DESCRIPTION 2 WARNING: Never install a fuse rated more than 800mA The DRA-RTM-8 is a multiplexer for 16 analog inputs - eight of which, marked1-8, are direct inputs for Pt-100 sensors, while the remaining (9-16), are for 4-20mA current loops.The DRA-RTM-8 output format is a 4-20mA current...
