Omega 22040C - Manual
Omega 22040C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATIONS; SAFETY and GENERAL INFORMATION; Save these instructions.; Inspect before each use.; PRODUCT DESCRIPTION; ONE YEAR LIMITED WARRANTY; SFA Companies
- Page 3 – PREPARATION
- Page 4 – WARNING; OPERATION
- Page 5 – MAINTENANCE; REPLACEMENT PARTS
Models 22040C, 22050C & 22100C
Models 22041C, 22051C & 22101C
(Air Options)
Long Chassis Hydraulic Service Jacks
Model
22040C, 22041C
22050C, 22051C
22100C, 22101C
Printed in China
22040C-M1 rev 06/08
Operating Instructions & Parts Manual
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
SFA Companies
http://www.omegalift.com
Capacity
4 Ton
5 Ton
10 Ton
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
!
!
ADVERTENCIA
• Leer, comprender, y seguir las instrucciónes antes
de utilizar el aparato.
• El manual de instrucciónes y la información de
seguridad deben estar comunicado en lengua del
operador antes del uso.
• No seguir estas indicaciónes puede causar daños
personales o materiales.
!
WARNING
To avoid
crushing and related injuries
:
NEVER
work on, under or around a
load supported only by a hydraulic
jack.
ALWAYS
use adequately rated
jack stands.
U.S. Patent No's. 5,755,099 • 5,946,912 • 5,341,723
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SPECIFICATIONS Model Capacity Jack Size ( L x W x H) Min. Height Max. Height Hyd. Range Saddle Dia. 22040C/ 22041C 4 Ton 50-5/8" x 15-3/8" x 7-1/2" 5" 24" 19" 5-1/2" 22050C/ 22051C 5 Ton 57-3/4" x 17" x 7-5/8" 7" 27" 20" 6-1/2" 22100C/ 22101C 1...
3 Figure 1 - Typical Long Chassis Jack Nomenclature (22051C shown) Handle Position Lock Release Valve (Handle Knob) Saddle Foot Pedal Oil Filler Plug/Screw (on Reservoir) Handle Front Wheel Rear Caster Lift Control Valve (for air actuated models only) Handle Sleeve Grease Fitting PREPARATION Assembl...
4 ! ! WARNING • Study, understand, and follow all printed materials provided with/on this product before use. • Do not exceed rated capacity. • Use only on hard, level surface.• This is a lifting device only! • Immediately after lifting, support the load with a pair of appropriately rated jack stand...
