Nutone LA522WH - Manual
Nutone LA522WH – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – keyholes; BaTTeRY RePlacemenT
- Page 3 – TRouBleshooTing; or modifications not expressly ap
- Page 4 – One Year Limited Wa r r a n t y; WaRRanTY
- Page 5 – instale la pila del botón; ESTE PAQUETE CONTIENE:; caRacTeRÍsTicas; TimBRe de PueRTa inalámBRico; insTalaciÓn; puentes de puerta; placa
- Page 6 – placa trasera; pulsador a su superficie; lengüeta larga; en una superficie metálica; Timbre; camBio de las Pilas; haga una prueba del alcance de; ojos de la; confirmar que se emita el sonido
- Page 7 – puerta de la superficie.
- Page 8 – Garantía Limitada de un Año; gaRanTÍa
- Page 9 – ceT emBallage conTienT :; piles - aucun fil à installer; caRillon de PoRTe sans Fil; insTallaTion
- Page 10 – plaQue
- Page 11 – dÉPannage; Cet appareil est conforme à la
- Page 12 – Garantie limitée d’un an; gaRanTie
This Package includes:
• Wireless Door Chime - requires 3
“D” alkaline batteries (not inlcuded)
• Wireless Door Chime Pushbutton
& 2-volt alkaline battery
• Mounting Hardware
FeaTuRes
• Battery powered chime and trans-
mitter - no wires to run
• Adjustable volume control
• 25-foot open air operating range
• 64 frequency channels to minimize
interference from other devices
• Optional NuTone wireless push-
buttons available for multiple doors
(side, rear, etc.)
WiReless dooR chime
insTallaTion
PUSH
BUTTON
BATTERY
{
DOOR SET
JUMPERS
installation instructions
read & save these instructions
-
+
-
+
-
+
FRONT
CASE
NOTCH
BACK
PLATE
2. install pushbutton battery.
Open the pushbutton case and install
the 2V alkaline battery (included).
To open pushbutton case: Insert a
flat-blade screwdriver into the
notch
on the bottom and push to open. Lift
the
front case
up and away from the
back plate
.
3. select chime melody.
Use the
door set jumpers
on the
pushbutton(s) to change the chime
melody.
Tip: Multiple pushbuttons can be set
to ring a different melody for each
door (up to three melodies).
Put jumpers on pins y and x for
Westminster chime.
Put jumpers on pins y and * for 2-
note “ding-dong”.
Put jumpers on pins x and * for -
note “ding”.
1. install chime batteries.
Remove the back of the chime case
and install three .5V alkaline, size
“D” batteries (not included). Replace
back case.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 TOP BACK PLATE LONG TAB 6. install pushbutton. Use the hardware (pro- vided) to attach the back plate of the pushbutton to its mounting surface. Make sure the long tab is at the bottom.If mounting the pushbut- ton to a metallic or con- crete surface: Increase the operating range by using wood spac...
3 TRouBleshooTing The range of the door chime de- pends on location, temperature and battery condition. If you are having problems with this product, please try the solutions listed below. chime rings on its own: • Button frequency jumpers and chime frequency jumpers MUST BE SET TO THE SAME FREqUENC...
4 One Year Limited Wa r r a n t y WARRANTY OWNER: NuTone warrants to the original consumer purchaser of its products thatsuch products will be free from defects in materials or workmanship for a period of one (1) year fromthe date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLI...
