NTI VOPEX-USBV - Manual - manualsarea.com

Page 2 - Warranty Information; or visit our website at; COPYRIGHT; Trademark

MAN034 Rev Date 10/7/2004 Warranty Information The warranty period on this product (parts and labor) is one (1) year from the date of purchase. Please contact NetworkTechnologies Inc at (800) 742-8324 (800-RGB-TECH) or (330) 562-7070 or visit our website at http://www.nti1.com for information regard...

Page 4 - NTI BRANDNAME AND DESCRIPTON; INTRODUCTION; Types of User Input Devices Supported:; LIMITATIONS; Materials included with this kit:

NTI BRANDNAME AND DESCRIPTON 1 INTRODUCTION The VOPEX-USBV-2-HUB (VOPEX) is a USB KVM Splitter and 3-Port Hub. It enables the control of one USB enabled CPUthrough two separate USB keyboards, USB mice, and VGA monitors and it enables the connection of 3 additional USB devices(other than keyboards or...

Page 5 - FEATURES AND FUNCTIONS; Power LED- for visual indication of splitter's power status; VOPEX; NTI

NTI BRANDNAME AND DESCRIPTON 2 FEATURES AND FUNCTIONS 1. Power Switch- to power up or power down the VOPEX-USBV-2. 2. Power LED- for visual indication of splitter's power status 3. Mode Status LEDs- for visual indication of splitter's operating mode 4. Mode Switch- press to manually switch between o...

Page 6 - INSTALLATION; Figure 1- Connect User 1 Keyboard, Mouse, and Monitor; USB KEYBOARD

NTI BRANDNAME AND DESCRIPTON 3 INSTALLATION FYI: It is not necessary to disconnect power to the CPU and monitor(s) before installation. Monitor Connection 1. Disconnect the monitor cable at the CPU and reconnect it to the "MONITOR 1" port on the VOPEX. (See Fig. 1) 2. Plug a second monitor (...

Page 7 - CPU Connection; Figure 2- Connect the VOPEX to the CPU; Hub Ports; Figure 3- Connect other devices to Ports 2-4; Rear View of Windows USB CPU

NTI BRANDNAME AND DESCRIPTON 4 CPU Connection 1. Connect the male USB type A connector end of the USB-AB-1M-ST cable into the device port on the CPU. 2. Connect the male USB type B connector of the same cable to the "CPU" port on the VOPEX. 3. Connect the male 15HD connector end of the VEXT-...

Page 8 - OPERATION; MODE; Keyboard Command Mode; Key Combination; Country Codes; Note; Ctrl

NTI BRANDNAME AND DESCRIPTON 5 OPERATION Mode Selection The VOPEX comes equipped with four (4) modes of operation. To manually toggle between modes, depress the MODE buttononce each time a mode change is desired. The VOPEX will cycle through the 4 modes of operation, then return to the first mode(1 ...

Page 9 - Mice and Trackballs with MACs

NTI BRANDNAME AND DESCRIPTON 6 Mice and Trackballs with MACs The VOPEX can be configured to enable full functionality between mice and trackballs having two or more buttons and a USBMAC CPU. By default, the CPU port on the VOPEX is configured for use a WINDOWS or SUN CPU and has no specialtranslatio...

Page 10 - SPECIFICATIONS; PROBLEM

NTI BRANDNAME AND DESCRIPTON 7 SPECIFICATIONS Size: Each unit is 8.5”W x 6”D x 2.6”H Power: Powered by 120 or 240VAC @ 50 or 60Hz-5VDC/2.0A AC Adapter Connections: 15HD VGA & SGA compatible USB Type A female device connectors USB Type B female CPU connector TROUBLESHOOTING PROBLEM SOLUTION • Key...

NTI VOPEX-USBV - Manual

Table of Contents:

Summary

Other NTI Models