NTI RACKMUX-V15 - Manual
NTI RACKMUX-V15 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Hardware Setup; Disconnect power from the CPU.; devices
- Page 3 – Daisy-Chained Host Adapters; Cable to CPU 1; Daisy-chained Host Adapters; NTI
- Page 4 – Initial Startup; NEWUSER1; Make a Connection; Host Adapter Ordering Chart
1
RACKMUX-V15/17-N-PRIMUX
RACKMUX KVM DRAWER WITH PRIMUX
®
KVM SWITCH VIA CAT5
Quick Start Guide
What's in the Box
•
NTI RACKMUX-V15/17-N-PRIMUX
•
Line cord, country specific
•
Terminating Plug (for last Host Adapter in chain)
•
CDROM w/ Owner's Manual and Quick Start Guide (pdf files)
•
This Quick Start Guide
What's also needed (sold separately)
•
NTI Host Adapter(s) HA-PS2 / HA-USB / HA-SUN (see chart on page 4
)
•
CAT5/5e/6 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru (pin 1 to pin 1, etc.)
RACKMUX
®
Series
(Host Adapter sold separately)
NETWORK
TECHNOLOGIES
INCORPORATED
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www.networktechinc.com
NTI
R
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 (Rear View) CAT5 Cableto User Station Cable to CPU Terminating Plug (Supplied) Hardware Setup 1. Disconnect power from the CPU. Note: The Host Adapter must be connected to the CPU before power is connected to the CPU. Failure to do so may result in damage to the Host Adapter. 2. Plug the Host Adap...
3 5. Connect the power cord to the User Station. 6. Press the switch to power-up the RACKMUX. 7. Plug in the power cord(s) and power-up the CPU(s). Daisy-Chained Host Adapters Up to 64 CPUs can be connected in a daisy-chain to a create a segment of CPUs controlled by a single user from a User Statio...
4 Initial Startup Upon startup, the Command Mode screen will be displayed, autologging you in as NEWUSER1 without administrative rights. No password will be necessary. As NEWUSER1 you have full access to all Host Adapters and their connected CPUs. To logout as a user, press < L > and the login...
