Page 2 - 002 MegaPath Networks Inc. All rights reserved.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 2 2002 MegaPath Networks Inc. All rights reserved. Table of Contents Follow Steps 1 through 5 to complete the DSL Equipment Installation Step 1: Verify Your System Requirements and Documents 3 Step 2: Verify the Contents...
Page 3 - Verify Your System Requirements and Documents; PC System Requirements:
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 3 2002 MegaPath Networks Inc. All rights reserved. Welcome to MegaPath DSL service. You will find everything you need to install your DSL service in this kit. It is important to carefully and exactly follow the step-by-s...
Page 4 - Netopia Router; Verify the Contents of Your DSL Equipment; Phone
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 4 2002 MegaPath Networks Inc. All rights reserved. Netopia Router Step 2: Verify the Contents of Your DSL Equipment 1-2 way Phone Splitter 4-Phone Line Filters Power Cord 1-Standard Phone Cord Ethernet/Data Cable Netopia...
Page 5 - Install a Telephone Filter on Every Telephone Line; Install filters on every phone jack on your DSL line that; A filter is required between all; Phone Cord
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 5 2002 MegaPath Networks Inc. All rights reserved. Step 3: Install a Telephone Filter on Every Telephone Line IMPORTANT: Install filters on every phone jack on your DSL line that will be used for an analog device to prev...
Page 6 - c. DSL Router and Analog Device on the Same Jack; If you do not have an available NIC; Warnings and Cautions:; Back up any important files on your hard drive.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 6 2002 MegaPath Networks Inc. All rights reserved. c. DSL Router and Analog Device on the Same Jack 1. 1. Connect the filter to your phone jack. 2. A filter is required between all phones, answering machines, fax machine...
Page 7 - Install the Netopia; This step is not needed; Call; MegaPath Networks; at
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 7 2002 MegaPath Networks Inc. All rights reserved. Step 4: Install the Netopia 45413 DSL Router Insert the connector from the power adapter to the power port, and plug the other end into an electrical outlet. Connect o...
Page 8 - PC Environment; Configuring Your Computer; Windows; Network Neighborhood; and select; and click; Properties
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 8 2002 MegaPath Networks Inc. All rights reserved. PC Environment Step 5: Configuring Your Computer Windows ® 95 and Windows ® 98 Dynamic Configuration (Recommended) Before you use your new DSL connection, you must have ...
Page 9 - IP Address; Obtain an IP Address automatically; tab. If the box under; highlight the IP; Remove
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 9 2002 MegaPath Networks Inc. All rights reserved. 3. Select the IP Address tab. Click Obtain an IP Address automatically . 4. Click on the Gateway tab. If the box under Installed Gateways contains any IP addresses, high...
Page 10 - DNS Configuration; To check the success of your setup, open a web browser and visit
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 10 2002 MegaPath Networks Inc. All rights reserved. 5. Click on the DNS Configuration tab. Click Disable DNS . Click OK . 6. When prompted, reboot the computer. Click OK . 7. To check the success of your setup, open a we...
Page 11 - and click on the; button. If you do not see TCP/IP in the list, go to the section in this
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 11 2002 MegaPath Networks Inc. All rights reserved. Windows 95 and Windows 98 Static Configuration (Optional) 1. Find the Network Neighborhood icon on your desktop. Right click on Network Neighborhood and select Prop...
Page 12 - New Gateway
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 12 2002 MegaPath Networks Inc. All rights reserved. 3. Select the IP Address tab. Click Specify an IP Address . Move your cursor to the IP address dialog box. Enter 192.168.1.2 as your IP address. Your subnet mask is 255...
Page 13 - If you already have an Internet connection; DNS configuration; tab. Enter the information as shown below.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 13 2002 MegaPath Networks Inc. All rights reserved. 5. If you already have an Internet connection , this window will be populated with the information required by your current Internet provider. It is necessary to remove...
Page 14 - , move your cursor to each dialog box and enter the; and; Type in; Add; OK; While there, you will find
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 14 2002 MegaPath Networks Inc. All rights reserved. If you do not already have an Internet Service provider , move your cursor to each dialog box and enter the information as shown. 3. Type in 66.80.130.23 and click Add ...
Page 15 - My Network Places
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 15 2002 MegaPath Networks Inc. All rights reserved. Windows 2000 Dynamic Configuration (Recommended) 1. Right click on My Network Places and select Properties . Once highlighted, left click once on your mouse. 2. Doubl...
Page 16 - the section in this guide titled; Obtain an IP address automatically; twice to close the last two screens and click; Close; to close the last screen. Under most circumstances,
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 16 2002 MegaPath Networks Inc. All rights reserved. 4. Highlight Internet Protocol (TCP/IP) and click on the Properties button. If you do not see TCP/IP in the list, go to the section in this guide titled Installing TCP/...
Page 19 - Single click on the; Protocols; tab at the top of the window.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 19 2002 MegaPath Networks Inc. All rights reserved. Windows NT Dynamic Configuration (Recommended) 1. Right click on My Network Places and select Properties . Once highlighted, left click once on your mouse. 2. Single ...
Page 20 - button at the; Obtain an IP address from DHCP server; and then click
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 20 2002 MegaPath Networks Inc. All rights reserved. 3. In the next window, you will see TCP/IP Properties . Highlight this, and left click on the Properties button at the bottom of the Network Protocols window. 4. The fo...
Page 21 - To check for the success of your setup, open a web browser and visit
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 21 2002 MegaPath Networks Inc. All rights reserved. 5. Click OK in this window as well. Under most circumstances, Windows NT will not require a reboot. If it does, please do so. 6. To check for the success of your setup,...
Page 22 - Installing TCP/IP for Windows; Start; Network
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 22 2002 MegaPath Networks Inc. All rights reserved. Installing TCP/IP for Windows Note: Complete this section only if you do not see TCP/IP listed in your Network Components when you begin configuring your computer. On...
Page 23 - on the left half of the screen, and select
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 23 2002 MegaPath Networks Inc. All rights reserved. 3. Click Add . 4. Select Protocol and click Add . 5. Select Microsoft® on the left half of the screen, and select TCP/IP on the right half of the screen. Click OK .
Page 25 - Client; on the Network Control panel window; Microsoft; Client for Microsoft Networks; on the right half of the
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 25 2002 MegaPath Networks Inc. All rights reserved. 8. Choose Client on the Network Control panel window . 9. Select Microsoft ® on the left half of the screen, and select Client for Microsoft Networks on the right half ...
Page 26 - MAC Environment; Macintosh DHCP Configuration (Recommended); Apple Menu
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 26 2002 MegaPath Networks Inc. All rights reserved. MAC Environment Macintosh DHCP Configuration (Recommended) 1. Single click the Apple Menu and move down to Control Panels. Highlight TCP/IP and single click once on you...
Page 27 - Using DHCP Server; from the; Configure; in the; DHCP Client ID; and enter any name you choose for your Macintosh.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 27 2002 MegaPath Networks Inc. All rights reserved. 3. Select Using DHCP Server from the Configure pull down menu. 4. Single click in the DHCP Client ID and enter any name you choose for your Macintosh.
Page 28 - Single left click; on; File; A warning box will appear asking you to save your settings. Select; Save; To check for the success of your setup, open a web browser and visit
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 28 2002 MegaPath Networks Inc. All rights reserved. 5. Single left click on File , then select Quit . 6. A warning box will appear asking you to save your settings. Select Save , then restart your Macintosh. 7. To check ...
Page 29 - Macintosh Static Configuration; and move down to; single click; once on your; Ethernet
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 29 2002 MegaPath Networks Inc. All rights reserved. Macintosh Static Configuration 1. Single click the Apple Menu and move down to Control Panels. Highlight TCP/IP and single click once on your mouse. 2. Select Ethernet ...
Page 30 - Manually; Single click in the; text box and enter
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 30 2002 MegaPath Networks Inc. All rights reserved. 3. Select Manually from the Configure pull down menu. 4. Single click in the IP Address text box and enter 192.168.1.2 as shown below.
Page 31 - Subnet mask; text box and enter your subnet mask. The Subnet Mask is always; Router Address; text box and enter the; LAN IP
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 31 2002 MegaPath Networks Inc. All rights reserved. 5. Single click in the Subnet mask text box and enter your subnet mask. The Subnet Mask is always 255.255.255.0. 6. Single click in the Router Address text box and ente...
Page 32 - Single click; Name server addr; Search domains
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 32 2002 MegaPath Networks Inc. All rights reserved. 7. Single click in the Name server addr text box and enter the IP addresses for the domain name servers located where you live. Enter 66.80.130.23 and 66.80.131.5 . 8. ...
Page 34 - DSL
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 34 2002 MegaPath Networks Inc. All rights reserved. Troubleshooting The Power, Ethernet , and DSL lights (labeled on the face of the router) should all turn solid green within two minutes after the unit is turned on. If ...