Netopia 3346-ENT - Manual
Netopia 3346-ENT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Check your package contents:; Unpack the Netopia C ayman; to locate the Router.; Turn on the power using the power switch. The; Power; light should come on; Set up the Netopia C ayman
- Page 3 – indicator light should; LAN; light for the port where you connected; Note about connecting your network:
- Page 4 – Configure the Netopia Cayman”; Configure your Computer for Dynamic Addressing; DNS Configuration
- Page 6 – Configure the Netopia C ayman; • Macintosh OS X users:; Select
- Page 7 – If your ISP uses PPPoA; NEXT
- Page 9 – H ot l i n e
1
Quickstart Guide
DS
L S
YN
C
Power
LAN 4
LAN 3
LAN 2
LAN 1
Copyright © 2003, Netopia, Inc. All rights reserved. Netopia, Cayman and the Netopia logo are
registered trademarks and Making Broadband Work is a trademark of Netopia, Inc. All other
trademarks are the property of their respective owners.
M a k i n g B r o a d b a n d W o r k
™
V. 24/07/03
C ayman
®
3346-ENT
C ayman
®
3356-ENT
A D S L
R o u t e r
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Check your package contents: 1. Unpack the Netopia C ayman DSL SYNC Power LAN 4 LAN 3 LAN 2 LAN 1 CD-ROM and Quickstart Guide RJ-11 Telephone Cable (lavender) RJ-45 Ethernet Cable (yellow) Netopia Router: Cayman 3346-ENT or Cayman 3356-ENT Power Supply and Power Cord 2 1. After unpacking your Cayman...
3 E NG L I S H 3. Connect the Router to the phone wall jack that supports your ADSL service. Insert one end of the lavender telephone cable in the DSL port on the CaymanRouter back panel. Insert the other end of the telephone cable into the tele-phone jack connected to your ADSL service. The DSL SYN...
The following instructions assume that you want to use the automatic configurationand address sharing features of the Router to provide IP information to devices onyour local Ethernet network. 1. Configure your computer to use an IP address on the same TCP/IP network as the Cayman Router: > Windo...
