Page 2 - Contents
www.netcomm.com.au Rev.1 - YML623 Page 2 16-port 10/100Mbps Fast Ethernet ProSwitch Contents ABOUT THIS GUIDE ....................................................................................................................... 3 Purpose ...............................................................
Page 3 - ABOUT THIS GUIDE; Purpose
Rev.1 - YML623 www.netcomm.com.au 16-port 10/100Mbps Fast Ethernet ProSwitch Page 3 ABOUT THIS GUIDE Congratulations on your purchase of the NetComm 16-port 10/100Mbps Fast EthernetProSwitch. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet networkcapabilities in a highly flexible pa...
Page 4 - INTRODUCTION; Fast Ethernet Technology
www.netcomm.com.au Rev.1 - YML623 Page 4 16-port 10/100Mbps Fast Ethernet ProSwitch INTRODUCTION This chapter describes the features of the Switch and some background information aboutEthernet/Fast Ethernet switching technology. Fast Ethernet Technology The growing importance of LANs and the increas...
Page 5 - Features
Rev.1 - YML623 www.netcomm.com.au 16-port 10/100Mbps Fast Ethernet ProSwitch Page 5 Switching LAN technology is a marked improvement over the previous generation of networkbridges, which were characterized by higher latencies. Routers have also been used to segmentlocal area networks, but the cost o...
Page 6 - UNPACKING AND INSTALLATION; Unpacking; Installation
www.netcomm.com.au Rev.1 - YML623 Page 6 16-port 10/100Mbps Fast Ethernet ProSwitch UNPACKING AND INSTALLATION This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents. The carton shouldcontain the foll...
Page 8 - IDENTIFYING EXTERNAL COMPONENTS; Front Panel
www.netcomm.com.au Rev.1 - YML623 Page 8 16-port 10/100Mbps Fast Ethernet ProSwitch IDENTIFYING EXTERNAL COMPONENTS This section identifies all the major external components of the switch. Front Panel The figure below shows the front panels of the 16-port 10/100Mbps Fast Ethernet ProSwitch. LED Indi...
Page 9 - USING THE PROSWITCH; Desktop Switching
Rev.1 - YML623 www.netcomm.com.au 16-port 10/100Mbps Fast Ethernet ProSwitch Page 9 USING THE PROSWITCH The NetComm16-port 10/100Mbps Fast Ethernet ProSwitch can be used to split parts of thenetwork into different collision domains, making it possible to expand your Fast Ethernetnetwork beyond the 2...
Page 10 - Segment Switching
www.netcomm.com.au Rev.1 - YML623 Page 10 16-port 10/100Mbps Fast Ethernet ProSwitch Segment Switching The 16-Port ProSwitch can segment a network into multiple connected pieces, increasing overallbandwidth and throughput.The following diagram illustrates the NetComm 16-Port ProSwitchsegmenting netw...
Page 11 - Extending a Network
Rev.1 - YML623 www.netcomm.com.au 16-port 10/100Mbps Fast Ethernet ProSwitch Page 11 Extending a Network Ethernet specifications limit the length of cable between hubs and PCs to 100 meters for a totaldiameter of 200 meters. By adding Fast Ethernet switches between hubs, the network isexpanded by 20...
Page 12 - TROUBLE SHOOTING; Network Adapter Cards
www.netcomm.com.au Rev.1 - YML623 Page 12 16-port 10/100Mbps Fast Ethernet ProSwitch TROUBLE SHOOTING S y m p t o m C a u s e Solution Power LED is off. Power not received at Switch Check the power cord connections for the switch and the connected device.Check for a defective adapter card,cable, or ...
Page 13 - CONNECTOR PIN ASSIGNMENTS; Pin Assignments
Rev.1 - YML623 www.netcomm.com.au 16-port 10/100Mbps Fast Ethernet ProSwitch Page 13 CONNECTOR PIN ASSIGNMENTS This appendix provides information about the RJ-45 plug and the vista RJ-45 connector usedfor the 16-Port Fast Ethernet ProSwitch. RJ-45 Plug In a Fast Ethernet network, it is important tha...
Page 14 - CABLING GUIDELINES; Fast Ethernet Cable Guidelines; Certification; Cable Lengths; Cable Specifications
www.netcomm.com.au Rev.1 - YML623 Page 14 16-port 10/100Mbps Fast Ethernet ProSwitch CABLING GUIDELINES Fast Ethernet Cable Guidelines Fast Ethernet uses UTP cable, as specified in the IEEE 802.3u standard for 100BASE-TX. Thespecification requires Category 5 UTP cable consisting of either 2-pair or ...
Page 15 - Twisted Pair Cables
Rev.1 - YML623 www.netcomm.com.au 16-port 10/100Mbps Fast Ethernet ProSwitch Page 15 Twisted Pair Cables For two devices to communicate, the transmitter of each device must be connected to thereceiver of the other device. The crossover function is usually implemented internally as part ofthe circuit...
Page 16 - TECHNICAL SPECIFICATION; General
www.netcomm.com.au Rev.1 - YML623 Page 16 16-port 10/100Mbps Fast Ethernet ProSwitch TECHNICAL SPECIFICATION General Standards IEEE 802.3 10BASE-T EthernetIEEE 802.3u 100BASE-TX Fast Ethernet Protocol CSMA/CD Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full-duplex)Fast Ethernet: 100Mb...
Page 17 - REGISTERING YOUR NETCOMM PRODUCT; Contact Information
Rev.1 - YML623 www.netcomm.com.au 16-port 10/100Mbps Fast Ethernet ProSwitch Page 17 REGISTERING YOUR NETCOMM PRODUCT To ensure that the conditions of your warranty are complied with, please go to the NetCommweb site for quick and easy registration of your product at www.netcomm.com.au Alternatively...
Page 18 - WARRANTY; Limitations of Warranty
www.netcomm.com.au Rev.1 - YML623 Page 18 16-port 10/100Mbps Fast Ethernet ProSwitch WARRANTY The warranty is granted on the following conditions: 1. This warranty extends to the original purchaser (you) and is not transferable;2. This warranty shall not apply to software programs, batteries power s...
