Page 2 - Preface; atmospheres can represent a safety hazard.
2 – YML902 Thank you for purchasing NetComm’s HSPA Wi-Fi Router Preface The purpose of this manual is to provide you detailed information on the installation, operation and application of your HSPA 7.2Mbps Wi-Fi Router. Important Notice and Safety Precaution • Before servicing or disassembling this ...
Page 3 - Table of Contents
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 3 Table of Contents 1 – Introduction ...................................................................................................................................... 6 1.1 Features ...............................................................
Page 4 - Appendix
4 – YML902 6.2 Access Control ......................................................................................................................................39 6.2.1 Services .........................................................................................................................
Page 5 - Introduction
Page 7 - Features; wired devices; Package Contents
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 7 1.1 Features • This HSPA 7.2Mbps Wi-Fi Router allows you to share your 3G connection with multiple wireless or wired devices • Provides you with worldwide coverage through triple-band HSUPA/HSDPA/UMTS (850 / 1900 / 2100 MHz), quad-band EDGE/GSM ...
Page 8 - LED Indicators; G9W – FRONT BEZEL GRAPHICS; LED
8 – YML902 1.3 LED Indicators The front panel LED indicators are shown in this illustration and followed by detailed explanations in the table below. The background colour of the bezel must be printed WHITE INKAll type and graphics print WHITE INK onto background colour of Pantone 313Lights and prod...
Page 9 - Rear Panel; The rear panel contains the ports for data and power connections.
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 9 1.4 Rear Panel The rear panel contains the ports for data and power connections. Power USIM Reset LAN1 LAN2 LAN3 LAN4 Main AUX 1 2 3 4 5 6 7 8 (1) Main 3G Antenna (removable, SMA connection)(2) Power jack for DC power input (12VDC / 1.5A).(3) Po...
Page 10 - Quick Setup
Page 11 - Setup Procedure; antennas should be screwed in a clockwise direction.
2 1 3 5 1 Quick Setup 2.1 Setup Procedure These steps explain how to quickly setup your router:1: Attach the two 3G antennas provided to the ports marked Main and AUX on the back of the router. The antennas should be screwed in a clockwise direction. 2: Insert your SIM card (until you hear a click) ...
Page 12 - Web User Interface
Page 13 - Default Settings
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 13 Web User Interface This section describes how to access the device via the web user interface using a web browser such as Microsoft Internet Explorer (version 5.0 or later). 3.1 Default Settings The following are the default settings for the de...
Page 15 - Login Procedure; To login to the web interface, follow the steps below:; Click OK to continue.
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 15 3.3 Login Procedure To login to the web interface, follow the steps below: NOTE: The default settings can be found in 3.1 Default Settings. 1: Open a web browser and enter the default IP address for the Router in the Web address field. In this ...
Page 16 - Web User Interface Homepage; subsequent chapters introduce the other main menu selections.
16 – YML902 3.4 Web User Interface Homepage The web user interface (WUI) is divided into two window panels, the main menu (on the top) and the display screen (on the bottom). The main menu has the following options: Basic, 3G Settings, Wireless, Management, Advanced and Status. Selecting one of thes...
Page 17 - The following table provides further details.; Fields
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 17 The following table provides further details. Fields Description Software version The software version of the device. Bootloader version The bootloader version of the device. Wireless driver version The wireless driver version of the wireless m...
Page 18 - G Settings
Page 19 - This menu includes 3G service Setup and PIN Configuration.; G Service Setup; the following sections for your assistance.
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 19 3G Settings This menu includes 3G service Setup and PIN Configuration. NOTE: Sections 8.3 and 8.4.2 also provide information about the 3G service. 4.1 3G Service Setup Select your 3G service settings according to predefined or custom profiles. ...
Page 21 - PIN Configuration; PIN Lock Off
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 21 4.2 PIN Configuration This screen allows for changes to the 3G SIM card PIN code protection settings. NOTE: If you have entered the incorrect PIN 3 times, your SIM card will be locked for your security. Please call your 3G Provider for assistan...
Page 24 - Wireless
Page 26 - Setup; extra networking security when connecting to remote hosts.; Option
26 – YML902 5.1 Setup This screen allows you to configure basic features of the wireless LAN interface. You can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country requireme...
Page 27 - Security; Click
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 27 5.2 Security This Router includes a number of security options that provides you with a secure connection to a 3G network. State-of-the art security includes:• WEP / WPA / WPA2 data encryption • SPI Firewall • VPN Pass-Through• MAC address IP f...
Page 28 - The settings for WPA authentication are shown below.
28 – YML902 Select SSID Your Service Set Identifier (SSID), sets your Wireless Network Name. You can connect multiple devices including Laptops, Desktop PCs and PDAs to your Wireless Router. To get additional devices connected, scan for a network, and locate the SSID shown on your Wireless Security ...
Page 29 - Configuration; to set the advanced wireless configuration.
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 29 5.3 Configuration The following screen appears when you select Configuration. This screen allows you to control the following advanced features of the Wireless Local Area Network (WLAN) interface:• Select the channel which you wish to operate f...
Page 32 - MAC Filter; Add; Enter the MAC address on the screen below and click
32 – YML902 5.4 MAC Filter This screen appears when Media Access Control (MAC) Filter is selected. This option allows access to be restricted based upon the unique 48-bit MAC address.To add a MAC Address filter, click the Add button shown below. To delete a filter, select it from the table below and...
Page 33 - Wireless Bridge; to implement new configuration settings.; Feature
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 33 5.5 Wireless Bridge The following screen appears when selecting Wireless Bridge, and goes into a detailed explanation of how to configure wireless bridge features of the wireless LAN interface.Click Save/Apply to implement new configuration set...
Page 34 - Station Info; Refresh; BSSID
34 – YML902 5.6 Station Info The following screen appears when you select Station Info, and shows authenticated wireless stations and their status. Click the Refresh button to update the list of stations in the WLAN. BSSID The BSSID is a 48-bit identity used to identify a particular BSS (Basic Servi...
Page 35 - Management
Page 36 - Device Settings; also provides a function for you to update your Routers firmware.
36 – YML902 Management The Management menu has the following maintenance functions and processes:6.1 Device Settings6.2 Access Control6.3 Simple Network Time Protocol (SNTP)6.4 Save and Reboot 6.1 Device Settings The Device Settings screens allow you to backup, retrieve and restore the default setti...
Page 37 - the default screen, close and restart the browser.
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 37 6.1.2 Update Settings The following screen appears when selecting Update from the submenu. By clicking on the Browse button, you can locate a previously saved filename as the configuration backup file. Click on the Update settings to load it. 6...
Page 39 - Access Control
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 39 6.2 Access Control The Access Control option found in the Management drop down menu, configures access related parameters in the following three areas:• Services • IP Addresses • Passwords Access Control is used to control local and remote mana...
Page 41 - First NTP timeserver:; Configure these options and then click Save/Apply to activate.
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 41 6.3 Simple Network Time Protocol (SNTP) This screen allows you to configure the time settings of your Router. To automatically synchronize with Internet timeservers, tick the box as illustrated below. The following options should now appear (se...
Page 42 - Save and Reboot
42 – YML902 6.4 Save and Reboot This function saves the current configuration settings and reboots your Router. NOTE1: It may be necessary to reconfigure your TCP/IP settings to adjust for the new configuration. For example, if you disable the Dynamic Host Configuration Protocol (DHCP) server you wi...
Page 43 - Advanced Setup
Page 44 - This chapter explains advanced setup for your Router:
44 – YML902 Advanced Setup This chapter explains advanced setup for your Router:
Page 45 - See the field descriptions below for more details.; Configure a second IP address
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 45 7.1 Local Area Network (LAN) This screen allows you to configure the Local Area Network (LAN) interface on your Router. See the field descriptions below for more details. Option Description IP Address Enter the IP address for the LAN interface ...
Page 46 - maximum of 32 entries can be configured.
46 – YML902 7.2 Network Address Translation (NAT) 7.2.1 Port Forwarding Port Forwarding allows you to direct incoming traffic from the Internet side (identified by Protocol and External port) to the internal server with a private IP address on the LAN side. The Internal port is required only if the ...
Page 48 - 2 entries can be configured.
48 – YML902 7.2.2 Port Triggering Some applications require specific ports in the Router’s firewall to be open for access by remote parties. Port Triggering opens up the ‘Open Ports’ in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the ‘Triggering...
Page 49 - Apply
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 49 Options Description Select an ApplicationorCustom Application User should select the application from the list. or User can enter the name of their choice. Trigger Port Start Enter the starting trigger port number (when you select custom applic...
Page 51 - Incoming IP Filter
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 51 Options Description Filter Name The filter rule label Protocol TCP, TCP/UDP, UDP or ICMP Source IP address Enter source IP address Source Subnet Mask Enter source subnet mask Source Port (port or port:port) Enter source port number or port rang...
Page 52 - Options
52 – YML902 7.3.2 Parental Control This Parental Control allows you to restrict access from a Local Area Network (LAN) to an outside network through the Router on selected days at certain times. Make sure to activate the Internet Time server synchronization as described in section 6.3 SNTP, so that ...
Page 53 - Routing; Default Gateway
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 53 7.4 Routing Default Gateway , Static Route and Dynamic Route settings can be found in the Routing link as illustrated below. 7.4.1 Default Gateway If the Enable Automatic Assigned Default Gateway checkbox is selected, this device will accept a ...
Page 56 - Save
56 – YML902 7.5 Domain Name Servers (DNS) 7.5.1 DNS Server Configuration If the Enable Automatic Assigned DNS checkbox is selected, this device will accept the first received DNS assignment from the Wireless Area Network (WAN) interface during the connection process. If the checkbox is not selected,...
Page 58 - Status
Page 60 - Diagnostics; Help link; Test
60 – YML902 8.1 Diagnostics The Diagnostics menu provides feedback on the connection status of the device. The individual tests are listed below. If a test displays a fail status:1: Click on the Help link 2: Now click Re-run Diagnostic Tests at the bottom of the screen to re-test and confirm the err...
Page 61 - System Log
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 61 8.2 System Log This function allows you to view system events and configure related options. Follow the steps below to enable and view the System Log.1: Click Configure System Log to continue. 2: Select the system log options (see table below) ...
Page 62 - : Click View System Log. The results are displayed as follows.
62 – YML902 Option Description Log Indicates whether the system is currently recording events. You can enable or disable event logging. By default, it is disabled. Log level Allows you to configure the event level and filter out unwanted events below this level. The events ranging from the highest c...
Page 63 - G Status
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 63 8.3 3G Status Select this option for detailed status information on your Routers 3G connection. Consult the table on the next page for detailed field descriptions.
Page 66 - Statistics; Interface
66 – YML902 8.4 Statistics These screens provide detailed information for:• Local Area Network (LAN) and Wireless Local Area Network (WLAN)• 3G Interfaces NOTE: These statistics page refresh every 15 seconds. 8.4.1 LAN Statistics This screen displays statistics for the Ethernet and Wireless LAN inte...
Page 68 - Route; Select Route to display the paths the Router has found.; Field
68 – YML902 8.5 Route Select Route to display the paths the Router has found. Field Description Destination Destination network or destination host Gateway Next hop IP address Subnet Mask Subnet Mask of Destination Flag U: route is up !: reject route G: use gateway H: target is a host R: reinstate r...
Page 69 - ARP; Click ARP to display the ARP information.; Dynamic Host Configuration Protocol (DHCP); Click DHCP to display the DHCP information.
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 69 8.6 ARP Click ARP to display the ARP information. Field Description IP address Shows IP address of host pc Flags Complete Incomplete Permanent Publish HW Address Shows the MAC address of host pc Device Shows the connection interface 8.7 Dynamic...
Page 70 - CLI commands Via Telnet
Page 71 - CLI commands via Telnet; Show all CLI commands
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 71 CLI commands via Telnet Show all CLI commands Description: List all available CLI commands that the 3G router supports. Synopsis: help | ? Example: > help?helplogoutrebootatmddnsdumpcfgpingsntpsysinfotftpwlansierraqosversionbuild
Page 72 - End the telnet session; Description: End the telnet session; Radio Signal Strength; Description: Display the 3G radio signal strength.; Value
72 – YML902 End the telnet session Description: End the telnet session Synopsis: logout Example: > logout Reset/reboot device Description: To reboot the router. Synopsis: reboot Example: > reboot Radio Signal Strength Description: Display the 3G radio signal strength. Synopsis: sierra show --s...
Page 73 - Radio Band; Description: Display the 3G band; Connection status; Description: Display the 3G network connection status
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 73 Radio Band Description: Display the 3G band Synopsis: sierra show --band Example: > sierra show --band band: IMT2000 Note: IMT2000 is band 2100 and WCDMA800 is band 850 Connection status Description: Display the 3G network connection status ...
Page 74 - Description: Display the IMSI and IMEI value; Wireless LAN mode set and read; Each option will be explained separately below.
74 – YML902 IMSI & IMEI read Description: Display the IMSI and IMEI value Synopsis: sierra show --imsi sierra show --imei Example: > sierra show --imsi imsi: 466974800524867 > sierra show --imei IMEI: 354219010024303 Wireless LAN mode set and read Description: Allows user to configure the ...
Page 75 - Configure basic Wireless LAN features; SSID) and restrict the channel set based on country requirements.
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 75 Configure basic Wireless LAN features Description: Configure basic wireless LAN features such as enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict t...
Page 79 - Configure wireless LAN security; wlan security open
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 79 Configure wireless LAN security Description: Enable or disable and configure the wireless LAN security. This router supports different types of security such as: WEP, 802.1X, WPA and WPA2. Synopsis: wlan security open [--wep <enabled|disable...
Page 81 - Description: Set the Group Rekey Interval
3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE YML902 – 81 --rekey <interval> Description: Set the Group Rekey Interval Default value: 0 --pskey <”pskeyStr”> Description: Set the WPA Pre-Shared Key Valid value: string of 8 ~ 63 characters. Note: 1. wlPreauth can only be used with WPA2. 2. W...
Page 82 - Configure wireless LAN MAC filter; wlan macfilter; able to connect to the router
82 – YML902 Configure wireless LAN MAC filter Description: Enable, disable and configure the wireless LAN MAC filter feature. This feature enables the router to allow or deny connection from wireless client based on the MAC address. Synopsis: wlan macfilter [--mode <disabled|allow|deny>] [--ad...
Page 84 - Show wireless LAN interface configurations
84 – YML902 Show wireless LAN interface configurations Description: show the current configuration of the wireless LAN interface Synopsis: wlan info [--config] [--security] [--macfilter] [--wds] [--station] Options: --config Description: display the list of parameters from config optionExample: >...
Page 86 - Contact Information
NetComm Limited ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia E – [email protected] W – www.netcomm.com.au Contact Information If you have any technical difficulties with your product, please do not hesitate to contact NetComm’s Customer Support Department. Email: [email protected]...
