Page 2 - Copyright and Trademark Information; Silicon Optix Inc
MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual Copyright and Trademark Information Portions copyright © 2005 Silicon Optix Inc All Rights Reserved. Portions of the information contained in this document are protected by worldwide copyright. All rights are reserved by Silicon Optix Incor...
Page 3 - Table of Contents; TheaterSync
TheaterSync Video Processor User Manual MKT-0026-UMN-1.002F Table of Contents 1 Preface..................................................................................................................................... 4 1.1 Limited Warranty ...........................................................
Page 4 - Preface; Limited Warranty
MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual 1 Preface 1.1 Limited Warranty NEC Solutions (America), Inc. warrants this product to be free from defects in material and workmanship under the following terms and, subject to the conditions set forth below, agrees to repair or replace (at...
Page 5 - LIMITATIONS OF LIABILITY
TheaterSync Video Processor User Manual MKT-0026-UMN-1.002F WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR We will pay labor and material expenses for covered items, but we will not pay for the following: 1. Removal or installation charges. 2. Costs of initial technical adjustments (set-up), incl...
Page 6 - HOW STATE LAW RELATES TO THE WARRANTY; Related Documents; TheaterSync Service Manual; Statement; Note; Reorient or relocate the receiving antenna.
MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual HOW STATE LAW RELATES TO THE WARRANTY This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. FOR MORE INFORMATION, TELEPHONE 800-836-0655 NEC SOLUTIONS (AMERICA), INC. 1250 N. Arlin...
Page 8 - Cleaning; - Unplug this unit from the power outlet and refer servicing to
MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual Portable Cart - An appliance and cart combination should be moved with extreme care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Ventilation - Locate the unit with adequate spa...
Page 9 - If the unit has been exposed to rain or water.
TheaterSync Video Processor User Manual MKT-0026-UMN-1.002F • If liquid has been spilled or foreign objects have fallen into the unit. • If the unit has been exposed to rain or water. • If the unit does not operate normally, following the operating instructions. Adjust only those controls that are c...
Page 10 - Introduction; General Description; Figure 1; Figure 2
MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual 2 Introduction 2.1 General Description The NEC TheaterSync (see Figure 1 ) is a high performance video signal processor intended as a companion for plasma and projector displays. TheaterSync brings the power of Silicon Optix HQV TM (“Hollyw...
Page 11 - Figure 5
TheaterSync Video Processor User Manual MKT-0026-UMN-1.002F Figure 2: Typical TheaterSync Application TheaterSync also performs a number of useful signal processing functions such as high-quality video scaling, switching, extreme keystone correction and audio delay, thus eliminating the requirement ...
Page 12 - Features and Specifications
MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual Features and Specifications Input Video Signals ¾ Composite Video (NTSC, PAL and SECAM) ¾ S-Video (NTSC and PAL) ¾ Component (YPbPr for SDTV and HDTV in American and European formats) ¾ Analog RGB (VGA to SXGA60Hz) ¾ DVI (VGA to QXGA) ¾ HDM...
Page 13 - Physical Characteristics
TheaterSync Video Processor User Manual MKT-0026-UMN-1.002F Physical Characteristics Dimensions: 17.0” x 9.7” x 1.75” (43.2 x 24.6 x 4.4 cm) Weight : 7 lbs. (3.2 kg) Power: 100-240V, 47-63 Hz, 72W Panel Diagrams Figure 3: TheaterSync Front Panel Drawing Figure 4: TheaterSync Rear Panel Drawing NEC S...
Page 14 - Installation; List of Standard Components; NOTE
MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual 3 Installation 3.1 List of Standard Components The TheaterSync processor ships with a number of standard components. When unpacking your unit, verify that the following items are included: • TheaterSync unit (qty 1) • IEC-320 American AC po...
Page 15 - Select the “Advanced” menu from the
TheaterSync Video Processor User Manual MKT-0026-UMN-1.002F For projection applications where keystone correction is required, continue with the following steps: 6. If the projector has an AUTOSET or AUTODETECT feature, disable this function. These projector modes may cause image distortion if a key...
Page 16 - User Interface; IR Remote Control; navigation; illustrates the
MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual 4 TheaterSync User Interface 4.1 IR Remote Control All TheaterSync user interface controls are accessed via infrared (IR) remote control. The remote has three groups of controls: a) OSM Navigation (including the Operate/Setup Key), b) Video...
Page 17 - Operational Modes
TheaterSync Video Processor User Manual MKT-0026-UMN-1.002F The Operate/Setup button toggles the TheaterSync between “Operate” and “Setup” modes of operation (as described in the next section of this User Interface chapter). The Menu button is used to invoke the OSM main menu. The Up/Down/Left/Right...
Page 18 - Mode; THEATERSYNC; Menu; chapter 5
MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual 4.2.1 Operate Mode Operate Mode is entered by toggling the Operate/Setup button on the IR remote. A brief transition of about 3 seconds occurs when Operate Mode is entered. During this transition period, the 24 x 2 LCD Display indicates THE...
Page 19 - Table 1; lists the Setup; lists the output resolutions currently supported in the unit.; Table 2
TheaterSync Video Processor User Manual MKT-0026-UMN-1.002F parameters, such as Output Resolution. Visual feedback for the adjustments of Setup Mode is seen on the 24 x 2 LCD display, rather than on OSM of the main screen. Sensitive parameters are placed in the Setup Menu so that an inadvertent key ...
Page 21 - lists the
TheaterSync Video Processor User Manual MKT-0026-UMN-1.002F leftmost octet. The Up/Down keys may then be used to increase/decrease the value of the octet. Subsequent presses of the Left/Right key will highlight the octet immediately to the left/right. The Up/Down keys may then be used to increase/de...
Page 22 - OSM Menu Structure; Table 3: OSM Main Menu Structure
MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual 5 On-Screen Menu 5.1 OSM Menu Structure The On-Screen Menu ( OSM ) is the primary way of controlling and selecting functions in the TheaterSync system. When first powered up, the TheaterSync will be in a Factory Default configuration, with ...
Page 23 - Table 4: OSM Complete Menu Structure
TheaterSync Video Processor User Manual MKT-0026-UMN-1.002F Icon ON OFF Descriptio n Functionality Advanced Enter this submenu to access the advanced menu options. Table 4: OSM Complete Menu Structure OSM Menu Level Level 1 Level 2 Level 3 Level 4 Level 5 Comments Component - - HDTV or SDTV VGA - - ...
Page 30 - Ratio
MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual OSM Menu Level Level 1 Level 2 Level 3 Level 4 Level 5 Comments Vivid - - Enhances color, expands video range signals. Dark Scene - - Enhances detail in dark scenes, expands video range signals. Bright Scene - - Enhances detail in bright sc...
Page 31 - Table 5
TheaterSync Video Processor User Manual MKT-0026-UMN-1.002F Inputs considered to have 4:3 aspect ratio are: • Computer Graphics signals with a 4:3 aspect ratio appearing on the DVI and Analog RGB inputs • SDTV signals (NTSC and PAL derived) appearing on the Composite, S-Video, and Component inputs •...
Page 34 - Table 7: Aspect Ratio Treatments for 16:9 Input with 4:3 Output
MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual Table 7: Aspect Ratio Treatments for 16:9 Input with 4:3 Output OSM Menu Name Description Standard All HDTV inputs are assumed to be 16:9. HDTV input signals (1080i and 720p) are shown in a letterbox on the 4:3 output display Full Screen Im...
Page 35 - Table 8: Aspect Ratio Treatments for 16:9 Input with 16:9 Output
TheaterSync Video Processor User Manual MKT-0026-UMN-1.002F Table 8: Aspect Ratio Treatments for 16:9 Input with 16:9 Output OSM Menu Name Description Standard 16:9 input signals shown full screen on 16:9 output display Full Screen Grayed out. No action. Zoom Grayed out. No action. Anamorphic Grayed...
Page 36 - Appendix A; Table 9: Input Modes Supported
MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual 6 Appendix A Table 9: Input Modes Supported Input Timing Format Input Video Source Item No. Mode Description Resolution Frequency RGB DVI HDMI Composite S-video Component SDI 1 480i (NTSC) 720 x 485 60 Hz - - YES YES YES YES YES 2 576i (PAL...
