NEC S900 - Manual

NEC S900

NEC S900 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
Page: / 19

Table of Contents:

  • Page 2 – NEC Versa S900 Disassembly Manual; Table of contents
  • Page 3 – Overview; Turn off the power and disconnect all power and all options.; Reassembly Instructions; Tweezers
  • Page 4 – Hazardous Voltage
  • Page 5 – Perform the following steps to remove the battery:; Removing the Versa Bay IV Module
  • Page 6 – Removing the Memory Module; To remove the memory module, first remove the battery (see; Removing the Wireless Mini PCI Card; To remove the wireless mini PCI card, first remove the battery (see
  • Page 7 – Unclip the wireless mini PCI card as shown in Fig. 5 and put it aside.; Removing the Keyboard Cover and the Keyboard; Removing the; keyboard cover aside.
  • Page 8 – Removing the Touchpad; To remove the touchpad, first remove the battery (see
  • Page 9 – Remove the screws marked in Fig. 12
  • Page 10 – Removing the Hard Disk Drive; To remove the hard disk drive, first remove the Keyboard (see
  • Page 11 – Removing the Heat Sink; To remove the heat sink, first remove the Keyboard (see
  • Page 12 – Removing the CPU; To remove the CPU, first remove the heat sink (see; Carefully lift the CPU out of the socket and put it aside.
  • Page 13 – Removing the LCD Display; Disassembling the LCD Display; then perform the following steps:
  • Page 15 – Disconnect the flat cable and the speaker cable shown in; and the LCD panel and put them aside.; Removing the Top Cover; To remove the top cover, first remove the LCD display (see
  • Page 16 – Removing the Main Board; To remove the main board, first remove the top cover (see
  • Page 17 – perform the next steps:; Remove the two Hex bold screws next to the VGA port.; Carefully lift up the main board and put it aside.
  • Page 18 – Removing the MDC Modem; To remove the MCD modem, first remove the main board (see; Carefully lift the modem and disconnect any cable attached to it.
  • Page 19 – Notice; Versa S900 Disassembly Manual
Loading the manual

NEC

Versa S900

Disassembly Manual


"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - NEC Versa S900 Disassembly Manual; Table of contents

NEC Versa S900 Disassembly Manual Page 2 Table of contents Overview.................................................................................................................................................................3 Technician Notes ........................................................

Page 3 - Overview; Turn off the power and disconnect all power and all options.; Reassembly Instructions; Tweezers

NEC Versa S900 Disassembly Manual Page 3 Overview This document contains step-by-step disassembly instructions for the Versa S900 chassis. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Furthermore, the screws that are removed are show...

Page 4 - Hazardous Voltage

NEC Versa S900 Disassembly Manual Page 4 Hazardous Voltage There is hazardous voltage present inside the computer when it is connected to an AC supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Authori...

Other NEC Models

All NEC Other