NEC P600 - Manual

NEC P600

NEC P600 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
Page: / 24

Table of Contents:

  • Page 2 – NEC Versa P600 Disassembly Manual; Table of contents
  • Page 3 – Overview; Turn off the power and disconnect all power and all options.; Reassembly Instructions; PH 0x60 Philips screwdriver
  • Page 4 – Hazardous Voltage
  • Page 5 – Removing the Battery; Perform the following steps to remove the battery:; Removing the battery; Removing the Hard Disk Drive; To remove the hard disk drive, first remove the battery (see; Removing the Hard disk drive cover
  • Page 6 – Lift up the hard disk drive and disconnect it as shown in Fig. 3; Disconnecting the hard disk drive; Removing the MDC Modem Module; To remove the MDCmodem module, first remove the hard disk drive (see; Removing the screws on the MCD modem
  • Page 7 – To remove the Keyboard Cover , first remove the battery (see; Removing Keyboard Cover screws; Remove the Keyboard Cover as shown in Fig. 7; Removing the Keyboard Cover; Removing the Keyboard; To remove the Keyboard module, first remove the keyboard cover (see
  • Page 8 – Remove the screws as shown in Fig. 8; Removing the screws holding the keyboard; Removing the Optical drive & Heat plate; Removing the
  • Page 9 – Removing the screws on Heat Plate; Carefully remove the heat plate from the base unit.
  • Page 10 – Removing Heat plate from base unit; Removing the Memory Module; To remove the memory module, first remove the Keyboard cover (see; Removing the memory module; Remove the Memory Module from its slot and put it aside.
  • Page 11 – Removing the Wireless Module; To remove the Wireless Module, first remove the keyboard cover (see; Disconnecting the wireless antenna; Removing Heat Sink & CPU; To remove the Heat Sink & CPU, first remove the Keyboard Cover (see
  • Page 12 – put it in a safe place.; Releasing the CPU
  • Page 13 – Removing the LCD Module; To remove LCD Module, first remove the Keyboard Cover (see; Disconnecting the LCD & speaker connectors; Release the screws at rear side of the unit as shown in Fig. 20
  • Page 14 – LCD hinge screws at the rear; Carefully lift the LCD module out of the system and put it aside.
  • Page 15 – Removing the LCD Panel; To remove the LCD Panel, first remove the LCD Module (see; Screws on the LCD Module; Release the LCD Bezel carefully and put it aside as shown in Fig. 23; Removing the LCD Bezel
  • Page 16 – Removing the inverter board screws
  • Page 17 – Removing the Top Cover; To remove the Top Cover, first remove the Keyboard Cover (see; Removing the Top cover screws; Flip over the unit and remove the screws as shown in Fig. 27; Removing the Top cover screws on the bottom of the system; Remove all screws in the battery compartment as shown in Fig. 28
  • Page 18 – Battery Compartment; Carefully lift up and release the top cover and put it aside.; Removing the top cover; Removing the Touch Pad; To remove the Touch Pad, first remove the Top Cover (see
  • Page 19 – shown in Fig. 30 and remove the Touch Pad assy from the palm rest.; Touch Pad Assembly
  • Page 20 – Removing the Top Cover; Removing the DC/DC Board
  • Page 21 – Removing the Main Board; To remove the Main board, first open the Top Cover (see; Removing the main board screws; Disconnect the VGA connector from the base as shown in Fig. 34; Disconnecting the VGA connector
  • Page 22 – Removing Main Board; DIP Switch Setting; DIP Switch position; Bit 2 Keyboard code
  • Page 23 – Screws
  • Page 24 – Notice; Versa P600 Disassembly Manual
Loading the manual

NEC

Versa P600

Disassembly Manual

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - NEC Versa P600 Disassembly Manual; Table of contents

NEC Versa P600 Disassembly Manual Page 2 Table of contents Overview.................................................................................................................................................................3 Technician Notes ........................................................

Page 3 - Overview; Turn off the power and disconnect all power and all options.; Reassembly Instructions; PH 0x60 Philips screwdriver

NEC Versa P600 Disassembly Manual Page 3 Overview This document contains step-by-step disassembly instructions for the Versa T400 chassis. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Furthermore, the screws that are removed are show...

Page 4 - Hazardous Voltage

NEC Versa P600 Disassembly Manual Page 4 Hazardous Voltage There is hazardous voltage present inside the computer when it is connected to an AC supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Authori...

Other NEC Models

All NEC Other