NEC P42XP10-BK - Manual
NEC P42XP10-BK – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – P42XP10-BK Installation Guide; 2” Plasma Monitor; WALL
- Page 3 – Display dimensions; TOP VIEW
- Page 4 – REAR VIEW
- Page 5 – Dimensions with optional speakers and stand
- Page 7 – Optional Speakers
- Page 9 – Connections; Speaker Terminal Connections; Located at bottom of display; Control Panel; Power Switch
- Page 10 – Control Codes; NOTE: Contact your NEC rep for codes not listed.; Cable Connection; Communication Protocol:; Communication: Asynchronous
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor
Rev 1.2
www.necdisplay.com
Contents:
Product Description and Notes
Page 1
Tilt
Angle
and
Rotation
Page 1
Ventilation Requirements
Page 2
Display Dimensions
Front, Top, Bottom & Right Side
Page 3
Rear
Page 4
Cosmetic
Colors
Page 4
Display Dimensions w/Optional Speakers and Stand
Page 5
Optional Stand Dimensions
Page 6
Optional Speaker Dimensions
Page 7
Dimensions
w/Optional
Wall
Mount
Page 8
Connections
Page 9
Control Codes
Page 10
Product Description
Type:
Plasma Monitor
Screen Surface: Anti-Reflective
Resolution:
1024x768
Dimensions:
40.79”(W) x 25.36”(H) x 5.00”(D)
Aspect Ratio:
16:9
Weight:
81.6 lbs
FCC:
Class B
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Do not install in the portrait position.
Landscape 20deg
Max. 20 deg
P42XP10-BK
Page 1 of 10
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
NEC Display Solutions of America, Inc. P42XP10-BK Installation Guide 42” Plasma Monitor Rev 1.2 www.necdisplay.com Ventilation Requirements (all models) Dimensions below are minimum required for proper ventilation. WALL 0 to 40 degC 32 to 104 degF 50mm 2” 50mm 2” P42XP10-BK Page 2 of 10 NOTE: The ve...
NEC Display Solutions of America, Inc. P42XP10-BK Installation Guide 42” Plasma Monitor Rev 1.2 www.necdisplay.com Display dimensions LED IR AC IN POWER SWITCH FILTER PANEL SURFACE TOP VIEW RIGHT SIDE VIEW BOTTOM VIEW 36.28 (PANEL DISPLAY AREA) 2 0 .4 3 ( P A N E L D IS P L A Y A R E A ) 1.62 37.54 ...
NEC Display Solutions of America, Inc. P42XP10-BK Installation Guide 42” Plasma Monitor Rev 1.2 www.necdisplay.com Display dimensions (cont.) for MOUNT UNIT4-M8 Depth 16 for PC 4-M4 Depth 10 Label REAR VIEW for SPEAKER8-M4 23.78 (STAND) 445 700 1 1 .8 1 0 .4 4 3 .5 8 4 .0 2 4 .4 0 8 .2 4 0 .7 0 7 .0...
