Page 2 - Declaration of the Importer; We hereby certify that the color monitor
Declaration of the Importer We hereby certify that the color monitor MultiSync P1150 JC-2145UMB are in compliance with Council Directive 73/23/EEC: - EN 60950 Council Directive 89/336/EEC: - EN 55022 - EN 60555-2 - EN 60555-3 - EN 50082-1 (IEC 801-2) (IEC 801-3) (IEC 801-4) and marked with NEC Europ...
Page 3 - Safety Instruction
Safety Instruction Caution: When operating the JC-2145UMB with a 220-240V AC power sourcein Europe except UK, use the power cord provided with the monitor. In UK, a BS approved power cord with moulded plug has a Black (fiveAmps) fuse installed for use with this equipment. If a power cord is notsuppl...
Page 5 - English
Page 6 - CRT Technology
Introduction Congratulations on your purchase of the MultiSync P1150 colour Monitor! The MultiSync P1150 monitor includes the aperture grille CRT,Microsoft’s Plug and Play, NEC’s ErgoDesign properties, the OnScreen Manager (OSM), as well as all the unique features you expectfrom MultiSync Monitors. ...
Page 8 - Power Manager
MultiSync monitors comply with these standards by offering IPMSystem power management and Reduced Magnetic Field technology. Power Manager IPM (Intelligent Power Manager) System is an innovative power-savingutility that complies with both the EPA’s Energy Star requirements andEurope’s TCO NUTEK’s po...
Page 9 - NOTE: Some system may not support all modes listed.
Reduced Emissions The P1150 monitor incorporates Reduced Magnetic Field technologydesigned to reduce magnetic and alternating electric field emissions and staticelectricity. NEC’s monitors follow the strictest magnetic field, alternatingelectric field, and electrostatic recommendations of the Swedis...
Page 10 - Power cord
Horizontal and vertical FullScan capability can increase the display sizeof a variety of video modes to the edges of the monitor bezel. TheFullScan capability allows you to use the entire screen area in mostresolutions, significantly expanding image size. Contents of the Package Included with your M...
Page 11 - The optimum monitor position is away from direct sunlight.
Recommended use For optimum performance when setting up and using the MultiSyncP1150 colour monitor, please note the following: – The optimum monitor position is away from direct sunlight. – Place the monitor just below eye level for the ideal viewingangle. – Allow adequate ventilation around the mo...
Page 14 - Your system has one of two configurations:
Connection to Your Personal Computer The MultiSync P1150 color monitor complements NEC computers, PCcompatibles, Macintosh and Macintosh compatibles. For the PC: Your system has one of two configurations: – the video controller is built into the computer – the video controller is in the form of a di...
Page 15 - Connection to computers or Cards Using BNC Cables
To attach the MultiSync P1150 monitor to your system, follow theseinstructions: 1. Turn off the power to your computer and MultiSync monitor. 2. If necessary, install the display card. For more information, refer to the display card manual. 3. Make sure the BNC/D-SUB Switch on the front of the monit...
Page 18 - OSM buttons on the front of the monitor function as follows:; EXIT; PROCEED; RESET; On-Screen Manager windows typically have the following elements:; Scroll Bar: Indicates direction of adjustment.; or the; PROCEED or EXIT button to view the current settings.
OSM buttons on the front of the monitor function as follows: Main Menu Sub-Menu EXIT Exits the OSM Controls. Exits to the OSM mainmenu. CONTROL ▼ / ▲ Moves the highlighted areaup/down to select one ofthe controls Moves the highlighted areaup/down to select one ofthe controls. CONTROL+/- Moves highli...
Page 19 - When in the main menu: Press the EXIT button.; If an arrow button is displayed (; BRIGHTNESS
Turning off OSM: – When in the main menu: Press the EXIT button. – When in the sub-menu: Press the EXIT button twice. – When in the sub, sub-menu: Press the EXIT button three times. OSM Menus Main Menu OSM’s main menu of control icons gives you an overview of theselection of controls available. When...
Page 20 - The icons control the following:; Brightness/Contrast Control; SHORT/TALL: Increases or decreases the vertical size of the image.; Color Control; Note on Controls in Color Control Menu:; Cursor
The icons control the following: Brightness/Contrast Control BRIGHTNESS: Adjusts the overall image and background screenbrightness. CONTRAST: Adjusts the image brightness in relation to thebackground. DEGAUSS: Eliminates the build-up of stray magnetic fields whichalter the correct scan of the electr...
Page 21 - Geometry Controls; Note on Controls in the Geometry Controls Menu:
Cursor +/-: Moves the bar in the + or – direction to increase ordecrease the adjustment or selects the color setting (1 through 5). RESET: Resets the current highlighted color setting to the factory setting. The current color settings on your monitor were determined by focusgroups and end users’ pan...
Page 22 - Tools 1; LANGUAGE: OSM menus are available in 6 languages.; ” and; DISABLE: The OFF MODE of the IPM is not used.
Tools 1 Provides a list of optional adjustments which include the following: LANGUAGE: OSM menus are available in 6 languages. OSM POSITION: You can choose where you would like the OSMimage to appear on your screen. Selecting OSM location allows you tomanually adjust the OSM menu left, right, up, or...
Page 23 - Tools 2
Tools 2 Provides a list of optional adjustments which include the following: MOIRE CANCELLER: Moiré can be visible if large areas of ditheredcolour are displayed (overall colour made from alternating pixels ofdifferent colours). The Moiré Canceller allows you to minimize thisphenomenon, using the +/...
Page 24 - Information; Set up your work area to promote a natural and relaxing position.
Information Provides you with additional information which includes the following: FITNESS TIPS: The Fitness Tips provide you with helpful remindersto periodically rest your eyes. You may select how frequently thereminders are displayed based upon your individual needs. Select an interval from 15, 3...
Page 25 - Troubleshooting/Support; Problem
Troubleshooting/Support Problem Check These Items No Picture The video card should be completelyseated in its slot. Power Switch andcomputer power switch should be inthe ON position. The signal cableshould be completely connected tothe video card/computer. Check theconnector for bent or pushed-in pi...
Page 27 - Technical specifications are subject to change without notice.
Active DisplayArea (FactorySetting) Horizontal 384 mm (Active display area isdependent upon the signal timing) Vertical 288 mm (Active display area isdependent upon the signal timing) Active DisplayArea (Full Scan) Horizontal 398 mm (Active display area isdependent upon the signal timing) Vertical 2...
Page 28 - Deutsch
Page 29 - Röntgenstrahlung
Röntgenstrahlung Die in diesem Gerät erzeugten Röntgenstrahlen sind durch dieeigensichere Kathodenstrahlröhre ausreichend abgeschirmt. Unsachgemäße Eingriffe, insbesondere Verändern der Hochspannungoder Einbau eines anderen Bildröhrentyps, können dazu führen, daßRöntgenstrahlung in erheblicher Stärk...
Page 30 - entwickelt; Bildröhren-Technologie
Vorstellung Herzlichen Glückwunsch zum Kauf Ihres NEC MultiSync P1150Farbmonitors! Neu an diesem Monitor sind neben den von NEC MultiSync-Monitorengewohnten Eigenschaften unter anderem die neue aperture grille-Bildröhre, Microsoft’s Plug and Play und der On Screen Manager(OSM), der eine menügesteuer...
Page 32 - Intelligent
Recycling. Viele dieser Punkte sind in strengen europäischen Standardsnormiert: – Automatisches Aktivieren der Stromsparfunktionen (auch unterNUTEK Spezifikation 803299 bekannt) – Abstrahlung (geringer als MPRII-Richtlinie und, für JC-2145UMB, geringer als TCO-Empfehlung) – Elektrische Sicherheit (E...
Page 34 - * Von NEC empfohlene maximale Auflösung für dieses Modell.
– 640 x 480: 60 - 160 Hz – 800 x 600: 55 - 145 Hz – 832 x 624: 55 - 140 Hz – 1024 x 768: 55 - 115 Hz – 1152 x 870: 55 - 100 Hz – 1280 x 1024: 55 - 85 Hz (non-interlaced, 85 Hz empfohlen)* – 1600 x 1200: 55 - 75 Hz (non-interlaced)** * Von NEC empfohlene maximale Auflösung für dieses Modell. ** Theor...
Page 35 - Ihren
Lieferumfang Die folgende Übersicht zeigt den Lieferumfang der NEC MultiSyncP1150 Farbmonitore. Öffnen Sie vorsichtig die Verpackung IhresMonitors und entnehmen Sie alle zum Monitor gehörenden Teile.Sollten Teile fehlen oder beschädigt sein, so wenden Sie sich bitteumgehend an Ihren NEC-Fachhändler....
Page 39 - Anschluß an Ihren Personalcomputer
Installation Anschluß an Ihren Personalcomputer Der NEC MultiSync P1150 Farbmonitor ist geeignet für NEC PC’s oderIBM kompatible PC’s sowie Macintosh und Macintosh kompatibleComputer. Für den PC: Ihr System sollte entweder einen eingebauten Grafikadapter oder eineinstallierte Grafikkarte besitzen. B...
Page 40 - Anschluß an Computer über BNC-Kabel
3. Stellen Sie sicher, daß der BNC/D-SUB-Schalter an der Vorderseite sich in Stellung D-SUB (nach unten) befindet. 4. Für den PC: Schließen Sie den 15-pin mini D-SUB Stecker des Multikabels an die Videobuchse Ihres Computers an.Schließen Sie den 15-pin D-SUB Stecker an den Monitor an. Für den Macint...
Page 44 - Elemente der OSM-Bildschirmanzeige; Zugriff auf das OSM-Menü: Durch Betätigen einer der Tasten Control; Das Hauptmenü; Hauptmenü; HELLIGKEIT
Elemente der OSM-Bildschirmanzeige Ein grün markierter Bereich zeigt den gerade aktiven Menüpunkt oderdie Einstellung. Nicht aktive Bereiche werden in gelb dargestellt. Eine Laufleiste zeigt die Richtung der Einstellung. Zugriff auf das OSM-Menü: Durch Betätigen einer der Tasten Control ▼ / ▲ , Cont...
Page 45 - Hinter den Icons verbergen sich die folgenden Menüs:; Größe und Position; CONTROL; : Bewegt den Pfeil zu den einzelnen Untermenüpunkten.
Hinter den Icons verbergen sich die folgenden Menüs: Helligkeits-/Kontrasteinstellung HELLIGKEIT: Erlaubt die Einstellung der generellen Bild- undHintergrundhelligkeit. KONTRAST: Ändert die Helligkeit des Bildinhaltes im Verhältniszum Bildhintergrund. ENTMAGNETISIERUNG: Entfernt sich aufbauende Magn...
Page 46 - Geometrie Menü; Hilfsfunktionen 1; SPRACHAUSWAHL: Es kann zwischen 6 Sprachen gewählt werden.
RESET: setzt alle Einstellungen in dem markierten Untermenü auf dieWerkseinstellung zurück. Die werkseitige Voreinstellung der Farben wurde durch repräsentativeUmfragen ermittelt und ist für die meisten Applikationen geeignet. Geometrie Menü EIN/AUS: Justiert die Krümmung der Bildseiten nach innen o...
Page 47 - Hilfsfunktionen 2
OSM ABSCHALTUNG: Verhindert jeglichen Zugriff auf alle OSMFunktionen. Wird versucht, auf das OSM zuzugreifen, so erscheint eineMeldung, die besagt, daß das OSM abgeschaltet ist. Um die OSMAbschaltung zu aktivieren, drücken Sie die PROCEED- und zugleichdie ▲ Taste. Um die OSM Abschaltung aufzuheben, ...
Page 48 - Unter diesem Menüpunkt kann die periodische
KONVERGENZ: Justiert die Konvergenz (Deckungsgleichheit) derElektronenstrahlen um wirklich weiße Linien ohne Farbschattierungendarzustellen. Durch drücken der +/- Tasten können Farbschattierungeneliminiert und so die Linien weiß und scharf dargestellt werden. FARBREINHEIT: Eliminiert Farbunreinheite...
Page 49 - Hilfe bei Problemen
GRAFIK MODUS: Zeigt den aktuell benutzten Grafikmodus mit denwichtigsten technischen Daten wie Bildwiederholfrequenz und Signalpolarität Hilfe bei Problemen Überprüfen Sie die folgenden Kabelverbindungen und Einstellungen,bevor Sie Ihrem NEC-Fachhändler Ihr Problem schildern. Betreiben Sie Ihren Mul...
Page 52 - *Von NEC empfohlene Auflösung für ergonomisches Arbeiten
Betriebs- undLagerbedingungen Betrieb: Temperatur 10 °C bis +35 °C Feuchtigkeit 30% bis 80% Lagerung: Temperatur -20 °C bis +60 °C Feuchtigkeit 10% bis 90% *Von NEC empfohlene Auflösung für ergonomisches Arbeiten ** Maximale Auflösung an Hand der horizontalen und vertikalenFrequenzbereiche. Technisc...
Page 53 - Français
Page 54 - TECHNOLOGIE DU TUBE
INTRODUCTION Nous vous félicitons pour votre achat d’un moniteur couleur MultisyncP1150. Les moniteurs MultiSync P1150 sont équipés d’un tube Aperture Grille,du système “Plug and Play” de Microsoft, de l’Ergodesign, de l’OSM(On Screen Manager) vous offrant ainsi toutes les Fonctionnalitésspécifiques...
Page 55 - PLUG AND PLAY; Plug and Play est la nouvelle solution que Microsoft; RÉGLAGE DE PURETÉ
Le traitement OptiClear des tubes des moniteurs P1150 réduitconsidérablement les reflets de l’éclairage ambiant et offre àl’utilisateur un confort et une productivité accrue. Le revêtementmulticouche des tubes améliore le contraste, sans altérer le niveau denetteté et de luminosité. Un tube à fort c...
Page 57 - PROTECTION CONTRE LES EMISSIONS PARASITES
DPMS (Display Power Management Signaling), lequel a été approuvépar l’organisation EPA. L’ économiseur d’énergie ne peut être activéque si vous possédez une carte graphique conforme aux standard VESADPMS. En agissant sur les signaux de synchronisation horizontal etvertical, le moniteur peut-être mis...
Page 58 - TECHNOLOGIE MULTIFRÉQUENCE
TECHNOLOGIE MULTIFRÉQUENCE La technologie multifréquence adapte automatiquement le moniteur auxfréquences de balayages des différents adaptateurs vidéo et affiche ladéfinition requise. Les moniteurs P1150 supportent de multiplesplates-formes compatibles IBM, la famille des ordinateurs Apple ettoutes...
Page 59 - Un câble d’alimentation
Contenu de l’emballage Vous trouverez dans l’emballage du moniteur couleur P1150, lesarticles suivants: – Un Moniteur couleur MultiSync P1150 (JC-2145UMB/R) – Un câble d’alimentation – Multicable – Manuel d’utilisation Stocker l’emballage d’origine pour tout transport ultérieur. F - 6 Contenu de l’e...
Page 64 - Connexion du moniteur MultiSync P1150 à votre système
Les deux configurations ont un connecteur vidéo identique (sub-D15).Si vous n’êtes pas certain du connecteur vidéo à utiliser, consultez lemanuel d’utilisation de votre ordinateur ou de votre carte graphique. Connexion du moniteur MultiSync P1150 à votre système Suivez la procédure ci-après: 1. Etei...
Page 68 - Fonctions des touches de contrôles en face avant du moniteur:; ELEMENTS DE L’OSM; On Screen Manager possède les éléments suivants:; Barre de Progression: indique la direction du réglage; ou sur la touche; PROCEED pour visualiser le réglage en cours.
Fonctions des touches de contrôles en face avant du moniteur: Menu Principal Sous-menu EXIT sortie de l’OSM retour au menu principal CONTROL ▼ / ▲ permet de se déplacerdans le menu poursélectionner un choix permet de se déplacerdans le sous-menu poursélectionner un choix CONTROL +/- permet de se dép...
Page 69 - Une flêche affichée (; LUMINOSITÉ
Sortie de l’OSM – Depuis le menu principal: appuyez sur la touche “EXIT” – Depuis un sous-menu: appuyez deux fois sur la touche “EXIT”. – Depuis un menu du sous menu: appuyez trois fois sur la touche“EXIT”. LES MENUS DE L’OSM Menu Principal Le menu principal vous donne une vue sur l’ensemble des con...
Page 70 - Les icones ont les fonctions suivantes; Commande de Luminosité et de Contraste; LUMINOSITÉ: Règle la luminance de l’image et du fond de l’écran.; Taille et Position; PETIT/GRAND: Diminue ou augmente la taille verticale de l’image.; Contrôle des couleurs; Sélection d’un des préréglages de couleurs.; Action des touches dans le menu “contrôle des couleurs”:; : déplacement dans le menu pour sélectionner un choix.
Les icones ont les fonctions suivantes Commande de Luminosité et de Contraste LUMINOSITÉ: Règle la luminance de l’image et du fond de l’écran. CONTRASTE: Règle la luminance de l’image par rapport à celle du fond. DEMAGNÉTISATION (Degauss): Elimine les champs magnétiquesqui s’accumulent sur le masque...
Page 71 - RESET: Rappel des paramètres usines du choix sélectionnés; Réglages de la Géométrie; Menu Géométrie; Action des touches dans le menu Géométrie; EXIT : retour au menu principal; RESET : Rappel des paramètres usines du choix sélectionné.
RESET: Rappel des paramètres usines du choix sélectionnés Les paramètres usines du contrôle des couleurs ont été déterminés pardes groupes de travails et des utilisateurs représentatifs pour les réglagesles plus fréquemment utilisés. Le contrôle des couleurs de NEC vous permet d’agir directement sur...
Page 72 - Outils 1; Fournit une liste de réglages optionnels incluants:; LANGAGES: Les menus de l’OSM sont disponibles en 6 langues.
Outils 1 Fournit une liste de réglages optionnels incluants: LANGAGES: Les menus de l’OSM sont disponibles en 6 langues. LA POSITION DE L’OSM: Vous pouvez choisir l’endroit où le menude l’OSM sera affiché sur votre écran. Ce réglage vous permet depositionner manuellement l’affichage du menu de l’OSM...
Page 73 - Outils 2; ournit une liste de réglages optionnels incluants:
Outils 2 ournit une liste de réglages optionnels incluants: ANNULER LE MOIRÉ: L’effet de moiré peut-être visible si unemajeure partie de l’affichage est composée d’un mélange de couleurs(ensemble de couleurs formé de pixels de différentes couleurs). Leréglage “ANNULER LE MOIRÉ” vous permet de minimi...
Page 75 - PROBLÈMES ET SOLUTIONS
PROBLÈMES ET SOLUTIONS Incident Vérifiez les points suivants Pas d’image la carte vidéo pourrait être déconnectée. lecommutateur de mise sous tension devrait être sur laposition ON. Le câble vidéo pourrait être déconnecté.Vérifier les broches du connecteur D-Sub. L’image défile ou estinstable Le cor...
Page 76 - Caractéristiques techniques
Incident Vérifiez les points suivants L’image présente desimpuretés de couleurs Réglez la luminosité le contraste.Activez la fonction de démagnétisation par l’OSM.ATTENTION : Un intervalle de 20 minutes estnécessaire avant d’activer à nouveau la fonction dedémagnétisation lorsqu’il n’y a pas eu dech...
Page 78 - Español
Page 79 - Tecnología CRT
Introducción Le felicitamos por la adquisición de su monitor color MultiSync P1150. Los monitores MultiSync P1150 incorporan la tecnología “Plug andPlay” de Microsoft, las características de ErgoDesign, los menús “OnScreen Manager” (OSM), así como todas las características únicas queusted espera enc...
Page 80 - Plug and Play; Plug and Play es la nueva solución de Microsoft; GlobalSinc
Plug and Play Plug and Play es la nueva solución de Microsoft ® para Windows ® 95 para proporcionar conexiones automáticas con periféricos evitandoconfusiones y pérdidas de tiempo en la configuración. Cuando se utilizacon un sistema y tarjeta de video “Plug and Play”, El monitorMultiSync P1150, info...
Page 81 - Gestión de Energía
Los monitores MultiSync cumplen estas normas mediante su Sistema deGestión de Energía, IPM, y su Tecnología de Reducción de CamposMagnéticos. Gestión de Energía IPM (Intelligent Power Manager) es una utilidad innovadora de ahorrode energía que cumple con los requerimientos Energy Star de la EPA ylos...
Page 87 - Su sistema tiene una de estas configuraciones:
Conexión a su ordenador personal Los monitores MultiSync P1150 son compatibles con los ordenadoresNEC, compatibles PC, Macintosh y compatibles Macintosh. Para el PC: Su sistema tiene una de estas configuraciones: – El controlador de video está integrado en el ordenador – El controlador de video es u...
Page 92 - Elementos OSM; Las ventanas del OSM constan de los siguientes elementos típicos:; Barra de Desplazamiento: Muestra la dirección del ajuste.; BRILLO
Elementos OSM Las ventanas del OSM constan de los siguientes elementos típicos: Resaltado: Muestra el menú o control seleccionado en color verde, losinactivos se muestran en amarillo. Barra de Desplazamiento: Muestra la dirección del ajuste. Acceso al OSM: Presione cualquiera de las teclas de contro...
Page 93 - Los iconos de control son los siguientes:; Controles de Brillo/Contraste; ALTO/CORTO: Aumenta o disminuye el tamaño vertical de la imagen.; Control de Color; Nota sobre los controles del menú Color Control:
Los iconos de control son los siguientes: Controles de Brillo/Contraste BRILLO: Ajusta el brillo de la imagen y del fondo (background) de lapantalla. CONTRASTE: Ajusta el brillo de la imagen en relación al fondo(background). DEGAUSS: Elimina las impurezas del color, pérdida de foco o malaconvergenci...
Page 94 - : Desplaza la zona resaltada hacia arriba o hacia abajo,; Nota sobre los controles del menú de controles de Geometría:; CURSOR; : Desplaza la zona resaltada hacia arriba o hacia abajo,
CURSOR ▼ / ▲ : Desplaza la zona resaltada hacia arriba o hacia abajo, para seleccionar una de las opciones. CURSOR +/-: Desplaza la barra hacia la dirección + ó - para aumentar odisminuir el ajuste o para seleccionar la configuración de color (de 1 a 5). RESET: Cambia la elección de color resaltada ...
Page 95 - Herramientas 1; LENGUAJE: Los menús OSM se pueden leer en 6 lenguajes.
Herramientas 1 Proporciona una lista de ajustes opcionales que incluye los siguientes: LENGUAJE: Los menús OSM se pueden leer en 6 lenguajes. POSICIÓN OSM: Usted puede elegir en qué parte de la pantalla, deseaque aparezca los menús OSM. Al seleccionar esta opción usted puedeajustar manualmente la ve...
Page 96 - Herramientas 2
Herramientas 2 Proporciona una lista de ajustes opcionales que incluye los siguientes: ELIMINAR MOIRÉ: La función “Eliminar Moiré” le permiteminimizar este fenómeno (sombras a modos de “aguas”, visibles en lapantalla) , utilizando los botones de control +/-. LINEALIDAD VERTICAL: Esta opción le permi...
Page 97 - Información; Esta opción le proporciona información adicional, incluyendo:
Información Esta opción le proporciona información adicional, incluyendo: Consejos de salud: Esta opción le proporciona recordatorios periódicospara ayudarle a descansar sus ojos. Usted puede seleccionar lafrecuencia con la que desea que aparezcan los recordatorios. Se puedenseleccionar intervalos d...
Page 98 - Solución de Problemas; Problema
Solución de Problemas Problema Compruebe lo siguienteplain No hay imagen La tarjeta de video debe estar completamenteinsertada en su slot. Los interruptores deencendido del monitor y del ordenador debenestar en la posición ON. El cable de señaldebe estar completamente conectado a latarjeta de video....
Page 101 - Italiano
Page 102 - CRT tecnologia
INTRODUZIONE Congratulazioni per aver acquistato il monitor MultiSync P1150! I Monitor MultiSync P1150, sono un concentrato di tecnologia capaci dioffrire caratteristiche esclusive per prodotti di questa categoria; comel’On Screen Manager (OSM), innovativo sistema di regolazione delmonitor. La tecno...
Page 103 - Plug and Play é la nuova soluzione Microsoft; SICRONISMO GLOBALE
Uno schermo ad alto contrasto con un dot di 0,28 mm. acuisce lachiarezza dell’immagine e ne esalta i dettagli. L’On-screen risulta piùfacile da leggere. Plug and Play Plug and Play é la nuova soluzione Microsoft ® con Windows ® 95 per fornire collegamenti automatici delle periferiche evitando l’uso ...
Page 104 - Gestione Dei Consumi; Il; VESA’s
Per essere riconosciuto come TCO, un monitor deve avere le seguenticaratteristiche: – spegnimento automatico del display(nota anche come NUTEKSpecification 803299) – caratteristiche di emissione (più rigide di quelle previste da MRP1990:8 a riguardo dei campi magnetici ridotti, e per ilJC-2145UMB an...
Page 105 - Emissioni ridotte
risparmiare energia. Le funzioni per le riduzioni dei consumi possonoessere utilizzate solo con il sistema Energy Star o una scheda video cheaderisce alle regole standard di VESA DPMS. Utilizzando i segnali disincronismo orizzontali e verticali del monitor, questo può essere settatonei diversi modi ...
Page 107 - Cavo di alimentazione
Contenuto della scatola Insieme al vostro monitor MultiSync della P1150 trovate i seguentiarticoli: – Monitor a colori MultiSync P1150 (JC-2145UMB/R) – Cavo di alimentazione – Cavo segnale (MultiCable) – Manuale utente Ricordatevi di conservare tutto l’imballaggio originale per potermuovere o traspo...
Page 108 - Usare il monitor in ambiente pulito e asciutto.
Raccomandazioni per l’uso. Per ottenere le migliori prestazioni dal vostro monitor e’ consigliabileseguire queste semplici raccomandazioni: – Evitare sorgenti di luce direttamente puntate verso lo schermodel monitor. – Lasciate intorno al monitor sufficente spazio in modo da garantireuna adeguata ve...
Page 110 - Il vostro è un monitor MultiSync P1150?
Come cominciare. Il vostro è un monitor MultiSync P1150? Collegate un estremo del cavo di alimentazione al monitor MultiSync el’altro estremo ad una presa di corrente. Utilizzare l’dattatore Apple HDI-45 per collegare il cavo segnale video del monitor all’uscita video del Macintosh. E’ l’immagine vi...
Page 111 - Il vostro sistema è configurato in uno dei seguenti modi:
Collegamento con il vostro Personal Computer Il monitor a colori Multisync può essere utilizzato con i computer NEC,con i PC compatibili, con i Macintosh e i Macintosh compatibili. Per PC: Il vostro sistema è configurato in uno dei seguenti modi: – La video controller è integrata nel computer – La v...
Page 116 - Le finestre di On-Screen Manager presentano i seguenti elementi:; Barra scroll: indica la direzione della regolazione.; o i tasti di avanzamento per; Come spegnere OSM
Menu principale Sotto-menu EXIT Uscita dai controlli OSM Uscita al menu principaleOSM CONTROL ▼ / ▲ Sposta l’area evidenziatain su e in giù perselezionare uno deicontrolli Sposta l’area evidenziatain su e in giù perselezionare uno deicontrolli CONTROLL +/- Sposta l’area evidenziata adestra e a sinis...
Page 117 - Le icone dei controlli:; Controlli Luminosità/Contrasto; LUMINOSITÁ
MENU OSM Menu principale Il menu principale di OSM delle icone di controllo vi offre una visionecomplessiva dei controlli disponibili. Quando è attivato OSM, le iconesono visualizzate sulla parte alta del menu. Se è visualizzato un tasto con la freccia, indica che sono disponibili altrescelte. Le ic...
Page 118 - Nota sui controlli nel menu Color Control:
Controlli Dimensione e Posizione SINISTRA/DESTRA: muove l’immagine orizzontalmente (sinistra odestra) SU/GIU’: muove l’immagine verticalmente (su o giù) STRETTO/LARGO: Aumenta o diminuisce la dimensione orizzontaledell’immagine. ALTO/BASSO: Aumenta o diminuisce la dimensione verticaledell’immagine. ...
Page 119 - Strumenti 1; LINGUAGGIO: i menu OSM sono disponibili in 6 linguaggi.
Controllo della geometria (Geometry). Menu Controllo della geometria. Il controllo della geometria vi permette di modificare le curvature o gliangoli dei margini del vostro video. IN/OUT: aumenta o diminuisce la curvatura dei margini sia versol’interno che verso l’esterno. SINISTRA/DESTRA(left/right...
Page 120 - “ contemporaneamente. Per disattivare il blocco; premere “PROCEED” e “; “ contemporaneamente.; DISABILITATO: La modalità OFF di IPM non é utilizzata.; Strumenti 2
viene disattivato il menu OSM. Le scelte preimpostate sono di 10, 20,30, 60 e 120 secondi. BLOCCO OSM: questa funzione blocca l’accesso di tutte le funzionicontenute nell’OSM. La voce “OSM Bloccato” apparirà qualora sivoglia accedere all’OSM. Per attivare il blocco premere il tasto“PROCEED” e “ ▲ “ ...
Page 121 - SICRONISMO GLOBALE: Elimina le impurità; Informazioni
LINEARITÀ VERTICALE: Selezionando Linearità verticale poteteregolare la spaziatura delle aree sullo schermo. Lo scopo è di assicurareche un cerchio di un pollice sia tale dovunque venga collocato sulloschermo. Il modo migliore per determinare la linearità verticale è ilseguente: – tracciate delle li...
Page 122 - DISPLAY MODE: Indica il mode corrente e la frequenza utilizzata.
Posizionate il vostro monitor ad una distanza compresa tra 30 e 60cm.La distanza ottimale è di 45cm. Disponete al meglio la vostra area al fine di ottenere una posizione dilavoro naturale e rilassante. Distogliete periodicamente lo sguardo dallo schermo, guardate efocalizzate, un oggetto distante al...
Page 123 - SOLUZIONE DEI PROBLEMI PIU’ COMUNI
SOLUZIONE DEI PROBLEMI PIU’ COMUNI Problema Controllate i seguenti elementi: Nessuna immagine La scheda video deve essere completamente inseritanel suo slot.Gli interruttori di accensione del video e del computerdevono essere nella posizione ON.Il cavo segnale deve essere ben collegato alla schedavi...
Page 125 - Le caratteristiche tecniche possono variare senza preavviso.
Area Visiva Utile(Settaggio diFabbrica) Orizzontale 384 mm (L’area visiva utile dipendedal timing del segnale utilizzato) Verticale 288 mm (L’area visiva utile dipendedal timing del segnale utilizzato) Area Visiva Utile(FullScan) Orizzontale 398 mm (L’area visiva utile dipendedal timing del segnale ...
Page 126 - Appendix
Page 128 - for Human Potential
C & C for Human Potential JC-2145UMB/R Printed in Japan 78131631