NEC mL5 - Manual

NEC mL5

NEC mL5 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
Page: / 15

Table of Contents:

  • Page 2 – NEC PowerMate ML5 Disassembly Manual; Table of contents
  • Page 3 – Overview; Turn off the power and disconnect all power and all options.; Reassembly Instructions; Philips screwdriver
  • Page 4 – Hazardous Voltage
  • Page 5 – Removing the Stabilisers; To remove the stabilisers follow the next steps:; Opening the Chassis; To open the chassis, first remove the stabilisers (see; cover away from the system and set it aside.
  • Page 6 – Removing the Riser Board Bracket and the Raiser Board; riser board bracket aside.
  • Page 7 – Removing a PCI or CNR Expansion Card; To remove an AGP expansion card, first remove the stabilisers (see
  • Page 8 – Removing the Floppy Disk Drive; To remove the floppy disk drive, first remove the stabilisers (see; marked in the picture below is free from the corresponding guide.; disk drive assembly.
  • Page 9 – Take the floppy disk drive out of the bracket and put it aside.; Removing the Optical Device Drive; disconnect the converter board and put it aside.
  • Page 10 – Removing the Hard Disk Drive; To remove the hard disk drive, first remove the stabilisers (see
  • Page 11 – the hard disk drive out of the bracket and put it aside.; Removing the Power Supply Unit; To remove the power supply unit, first remove the stabilisers (see; Removing the Auxiliary System Fan; Removing the
  • Page 12 – chassis and put it aside.; Removing the CPU; To remove the CPU, first remove the stabilisers (see; Removing the Second Serial Port; To remove the second serial port, first remove the stabilisers (see
  • Page 13 – Removing the Internal Speaker
  • Page 14 – Take the speaker off the chassis and put it aside.; Removing the Motherboard; To remove the motherboard, first remove the stabilisers (see
  • Page 15 – Notice; PowerMate ML5 Disassembly Manual
Loading the manual

NEC

PowerMate ML5

Disassembly Manual

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - NEC PowerMate ML5 Disassembly Manual; Table of contents

NEC PowerMate ML5 Disassembly Manual Page 2 Table of contents Overview.................................................................................................................................................................3 Technician Notes .....................................................

Page 3 - Overview; Turn off the power and disconnect all power and all options.; Reassembly Instructions; Philips screwdriver

NEC PowerMate ML5 Disassembly Manual Page 3 Overview This document contains step-by-step disassembly instructions for the PowerMate ML5 chassis. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Furthermore, the screws that are removed ar...

Page 4 - Hazardous Voltage

NEC PowerMate ML5 Disassembly Manual Page 4 Hazardous Voltage There is hazardous voltage present inside the computer when it is connected to an AC supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Auth...

Other NEC Models

All NEC Other