Page 2 - Index; Symbol Information
Index Warning, Caution ........................................................................................................................ English-1 Registration Information .............................................................................................................. English-2 ...
Page 3 - English; WARNING
English-1 English WARNING CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET.TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE ACOUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO...
Page 4 - Registration Information; Declaration of the Manufacturer; Declaration; Declaration of Conformity; Classification
English-2 Registration Information Declaration of the Manufacturer Means of Conformity Device Classification: Class I, non-measuring function Applicable Rules: Annex IX, Rules 1.4 (Section 1)and 1.1 (Section 3) Product Name: MD212MC/MD213MC21.3" Diagnostic Imaging Color LCD MonitorMD213MG21.3...
Page 5 - Recommended use
English-3 English Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous sh...
Page 7 - Contents
English-5 English Contents Your new NEC monitor box* should contain the following: • MD212MC/MD213MC/MD213MG monitor with tilt/swivel/pivot/height adjust stand • Power Cord • Video Signal Cable (DVI-D to DVI-D cable)* 1 • Quick Reference Guide • CD-ROM x 2 • Cable Cover Power Cord (Type of power cor...
Page 8 - Quick Start
English-6 Figure C.1 Quick Start To attach the LCD monitor to your system, follow these instructions: NOTE: Make sure to read “Recommended Use” before installation.In order to display the maximum resolution, a display controller is required which can output a resolution of1200 x 1600 (in portrait mo...
Page 10 - Screen Rotation; Raise and Lower Monitor Screen
English-8 Tilt Grasp both sides of the monitor screen with your hands andadjust the tilt as desired ( Figure TS.1 ). Figure TS.1 Swivel Grasp both sides of the monitor screen with your hands andadjust the swivel as desired ( Figure TS.2 ). NOTE: Handle with care when tilting the monitor screen. Figu...
Page 11 - Mount Flexible arm; Remove Monitor Stand
English-9 English Mount Flexible arm 1. Change the 4 screws that were removed from the stand removal to attach the flexible arm to the monitor ( Figure F.1 ). Caution: • When mounting, use ONLY the screws (4 pcs) that were removed from the stand toavoid damage to the monitor or stand. • The monitor ...
Page 12 - SETTING OSD LANGUAGE
English-10 Controls The OSD (On-Screen Display) control buttons are located on the back of themonitor: To access OSD menu, press the EXIT button. To change signal input, press the SELECT button. NOTE: OSD must be closed in order to change signal input. SETTING OSD LANGUAGE • Set the OSD language bef...
Page 13 - Luminance/Contrast Controls; LUMINANCE; Image Controls
English-11 English Luminance/Contrast Controls LUMINANCE Adjusts the overall image and background screen luminance.When LUMINANCE is adjusting the numerical values blinks. AUTO CONTRAST (Analog input only) Adjusts the image displayed for non-standard video inputs. BLACK LEVEL (Analog input only) Adj...
Page 14 - EXPANSION; Tools; SHARPNESS
English-12 EXPANSION Sets the zoom method. FULL: The image is expanded to 1200 x 1600 (in portrait mode) or 1600 x 1200 (in landscape mode) for MD212MC and 1536 x 2048 (in portrait mode) or 2048 x 1536 (in landscape mode) for MD213MC/MD213MG, regardless of theresolution. ASPECT: The image is expande...
Page 15 - MENU Tools
English-13 English OFF MODE This function allows the monitor to enter into a power saving mode after a period of inactivity. The OFF MODE has two settings. OFF: Monitor does not go into power save mode when the input signal is lost. STANDARD: Monitor enters power save mode automatically when the inp...
Page 16 - FACTORY PRESET; Information
English-14 FACTORY PRESET Selecting Factory Preset allows you to reset all OSD control settings (LUMINANCE, BLACK LEVEL, IMAGECONTROL, COLOR CONTROL SYSTEM, SHARPNESS, OFF MODE, OSD LEFT/RIGHT, OSD UP/DOWN, OSDTURN OFF) back to the factory settings. Individual settings can be reset by highlighting t...
Page 17 - Advanced OSD
English-15 English Tag1 Luminance Adjusts the overall image and screen background luminance.Press “Left” or “Right” to adjust.When LUMINANCE is adjusting, a numerical value blinks. Auto Contrast Adjusts the image displayed for non-standard video inputs. Press “SELECT” to adjust. (Analog input only) ...
Page 23 - Calibration; Self Calibration
English-21 English Calibration Before proper calibration can be performed, display should warm-up for a minimum of 30 minutes.If trying to start calibration before the monitor is warmed-up, a warning will appear on the screen (Figure 1) . Figure A 2. Select SELF in the Mode selection ( Figure 3 ). 3...
Page 24 - Figure 6; Copy Calibration; Figure 7; Figure 8; Figure 9
English-22 6. Press SELECT to start the calibration. Front sensor calibration may take several minutes depending on user setting. 7. After the CALIBRATION SUCCEEDED message appears ( Figure 6 ), press SELECT. To end the calibration mode, press “EXIT”. Figure 6 Copy Calibration 1. To show the CALIBRA...
Page 25 - Gamma Adjust
English-23 English 5. Press SELECT on Display B to start reading the white point* and luminance information of Display A. 6. After copying the Display A information, the target luminance and target chromaticity coordinates will be stored and displayed in the OSD of Display B. The target value is not...
Page 26 - DICOM Measurement
English-24 DICOM Measurement 1. To show the CALIBRATION menu, select the CALIBRATION in the advanced menu (page 20). 2. Select DICOM MEASURE in the Mode selection ( Figure 17 ). 3. Select the Color setting in COLOR* 2 selection and Gamma setting in GAMMA selection. *2 MD213MG does not have COLOR sel...
Page 27 - Specifications - MD212MC
English-25 English Specifications - MD212MC Monitor Specifications MD212MC Monitor Notes LCD Module Diagonal: 54.0 cm/21.3 inches Active matrix; thin film transistor (TFT) Viewable Image Size: 54.0 cm/21.3 inches liquid crystal display (LCD); UA - SFT (IPS); Native Resolution (Pixel Count): 1200 x 1...
Page 28 - Specifications - MD213MC
English-26 Specifications - MD213MC Monitor Specifications MD213MC Monitor Notes LCD Module Diagonal: 54.0 cm/21.3 inches Active matrix; thin film transistor (TFT) Viewable Image Size: 54.0 cm/21.3 inches liquid crystal display (LCD); UA - SFT (IPS); Native Resolution (Pixel Count): 1536 x 2048 (Por...
Page 29 - Specifications - MD213MG
English-27 English Specifications - MD213MG Monitor Specifications MD213MG Monitor Notes LCD Module Diagonal: 54.0 cm/21.3 inches Active matrix; thin film transistor (TFT) Viewable Image Size: 54.0 cm/21.3 inches liquid crystal display (LCD); SA - SFT (IPS); Native Resolution (Pixel Count): 1536 x 2...
Page 30 - Features
English-28 Features DVI-I: The integrated interface ratified by the Digital Display Working Group (DDWG) that allows both digital and analog connectors off of one port. The “I” stands for integration for both digital and analog, The digital portion is DVI-based. DVI-D: The digital-only subset of DVI...
Page 31 - Troubleshooting
English-29 English Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode ...
Page 32 - Manufacturer’s Recycling and Energy Information
English-30 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’stop priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help define and...
