Page 2 - Index; Symbol Information
Index Warning, Caution ..........................................................................................................................English-1 Intended Use ................................................................................................................................Engl...
Page 3 - English; WARNING
English-1 English TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONEN...
Page 4 - Intended Use
English-2 Intended Use The MD211G3 Grayscale display is intended to be used for displaying and viewing of digital images for diagnosis by trained physicians.To guarantee the display performance as specifi ed, it must only be used in conjunction with NEC approved display controllers.MD211G3 cannot be...
Page 5 - Registration Information; Declaration; Declaration of the Manufacturer; Canadian Department of Communications Compliance Statement; Declaration of Conformity; Classifi cation
English-3 English Registration Information Declaration Declaration of the Manufacturer Declaration of the Manufacturer Means of Conformity Device Classifi cation: Class I, non-measuring function Applicable Rules: Annex IX, Rules 1.4 (Section 1) and 1.1 (Section 3) Product Name: MD211G3 21.3” Diagnos...
Page 6 - Recommended use
English-4 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD MONITOR: WARNING: Do not modify this equipment without authorization of the manufacturer. WARNING: To disconnect this product from the mains supply discon...
Page 8 - Contents
English-6 Contents Your new NEC monitor box* should contain the following: • MD211G3 monitor with tilt/swivel/pivot/height adjust stand • Power Cord • Video Signal Cable (DVI-D to DVI-D cable)* 1 • DisplayPort cable • USB Cable • Quick Reference Guide • CD-ROM x 2 Quick Reference Guide DVI-D to DVI-...
Page 9 - Quick Start
English-7 English Quick Start To connect the LCD monitor to your system, follow these instructions: NOTE: Make sure to read “Recommended Use” (page 4) before installation.In order to display the maximum resolution, a display controller that can output a resolution of 1536 x 2048 (in portrait mode) o...
Page 11 - Raise and Lower Monitor Screen
English-9 English 7. Slide down the cable cover ( Figure D.1 ). 8. Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet. NOTE: Please refer to the Caution section of this manual for proper selection of an AC power cord. Figure D.1 9. Turn...
Page 12 - Screen Rotation; Tilt; Swivel
English-10 Screen Rotation Before rotating, the screen must be raised to the highest level and tilt to avoid knocking the screen on the desk or pinching your fi ngers. Disconnect all cables.To raise the screen, place hands on each side of the monitor and lift up to the highest position ( Figure RL.1...
Page 13 - Flexible Arm Installation; Mount the Flexible arm
English-11 English Figure F.1 100 mm 100 mm Weight of LCD assembly: 7.5 kg Flexible Arm Installation This LCD monitor is designed for use with a fl exible arm. To prepare the monitor for alternate mounting purposes: • Follow the instructions provided by the manufacturer of the monitor mount. • To me...
Page 16 - MENU
English-14 VIDEO DETECT Selects the video detection method, when more than one video signal source is connected. FIRST: When current video input signal is not present, then the monitor searches for a video signal from a different video source. If a video signal is supplied by the other video source,...
Page 17 - FACTORY PRESET; Information
English-15 English FACTORY PRESET Selecting Factory Preset allows you to reset all OSD control settings (LUMINANCE, IMAGE CONTROL, PICTURE MODE, SHARPNESS, OFF MODE, OSD LEFT/RIGHT, OSD UP/DOWN, OSD TURN OFF) back to the factory settings. Individual settings can be reset by highlighting the control ...
Page 19 - Advanced OSD
English-17 English Advanced OSD <How to use the advanced OSD> • When both OSD and Key Guide are off, push the “RESET” and “EXIT” buttons two times simultaneously. • You will see the Advanced OSD. This menu is larger than the normal OSD and has a tagged structure from Tag 1 to 9. <How to exi...
Page 23 - Specifi cations
English-21 English Specifi cations Monitor Specifi cations MD211G3 Monitor Notes LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): 54.0 cm/21.3 inches 54.0 cm/21.3 inches 1536 x 2048 (Portrait)2048 x 1536 (Landscape) Active matrix; thin fi lm transistor (TFT) liquid crystal ...
Page 24 - Features
English-22 Features DisplayPort: DisplayPort is designed to be the future-ready, scalable solution for high performance digital display connectivity. It enables the highest resolutions, the fastest refresh rates and deepest color depths over standard cables. DVI-D: The digital-only subset of DVI rat...
Page 26 - STAND-ALONE CALIBRATION
English-24 STAND-ALONE CALIBRATION Stand alone calibration can recalibrate the display without using a computer by the front sensor or connecting an external sensor. There are 5 functions in STAND-ALONE CALIBRATION. • Self Calibration: Calibrates the front sensor based on the USB optical sensor. Alt...
Page 27 - Self Calibration
English-25 English Self Calibration Calibrates the front sensor based on the USB optical sensor. Or to manually adjust the integrated front sensor with an external near range luminance sensor reference, which is traceable to a primary standards laboratory. Self Calibration should be performed when U...
Page 28 - Copy Calibration
English-26 Copy Calibration The luminance can be copied from one display to one or more additional displays. Using this feature reduces the variation between different displays allowing them to match each other more closely. USB optical sensor Figure C.1 Display A – SOURCE display of luminance to co...
Page 29 - Gamma Adjust; Figure 2
English-27 English Gamma Adjust By using the front sensor, Gamma Adjust can recalibrate the luminance and gamma. All PICTURE MODES are updated when Gamma Adjust is performed. 1. To show the CALIBRATION menu, select the STAND ALONE CALIBRATION in the advanced menu (page 24). 2. Select GAMMA ADJUST in...
Page 32 - Manufacturer’s Recycling and Energy Information
English-30 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help defi ne a...
