NEC ES SlimLine Series - Manual
NEC ES SlimLine Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Memory Upgrade
■
Maximum memory supported: 512 MB;
minimum memory required: 32 MB.
■
Memory type and size can vary between sockets.
■
System supports 168-pin, 100-MHz non-ECC SDRAM modules
in 32-MB, 64 -MB, 128-MB, and 256-MB configurations.
Use NEC memory upgrade kits for the best compatibility with your
system. For memory compatibility information, call Technical Support.
■
Single- or double-sided DIMMS are supported.
■
No jumper setting required.
409-00065-000
PowerMate
®
ES SlimLine Series System Board Configuration
Note:
See your
PowerMate ES SlimLine Series User’s
Guide
for detailed option installation information.
Website: www.nec-computers.com
Technical Support: 800-632-4525
Secondary
IDE Connector
Processor Socket
(Socket 370)
System
Memory
Upgrade
Sockets
Primary
IDE Connector
J4
Jumper
JP4
Jumper
JBAT1
Jumper
Processor Upgrade
See your user’s guide for detailed processor upgrade information.
JP3
Jumper
JKBV1
Jumper
Jumper Settings
J23
Jumper
BIOS
Factory setting. Sets the system for
Recovery
normal operation. The BIOS uses current
configuration information and passwords
at power on.
To enable BIOS recovery for a corrupted
system, remove the jumper. Wait 10 seconds.
Replace the jumper on pins 1 and 2.
Restores Safe BIOS settings as the
default BIOS settings and loads the
BIOS Setup at power on.
1 2 3
J4
1 2 3
J4
CPU
Factory setting.
Type
Uses an Intel
®
CPU.
3
2
1
J23
Uses a Cyrix
®
CPU.
3
2
1
J23
CMOS
Factory setting. Maintains system board
Clear
configuration in CMOS RAM
with onboard battery.
Clears CMOS while system power is off.
Return jumper to pins 1 and 2 before
powering system on.
Caution:
To prevent damage to the system board,
avoid clearing CMOS while power is on.
3
2
1
JBAT1
3
2
1
JBAT1
Keyboard
Factory setting. Wakes up the system from
Wakeup
Suspend to RAM mode via the keyboard.
Requires Windows 98 running in Advanced
Configuration Power Interface (ACPI) mode.
Normal operation.
Disables Keyboard Wakeup.
3 2 1
JKBV1
3 2 1
JKBV1
Onboard
Factory setting. Enables onboard audio.
Audio
Disables onboard audio. Use this
setting if you install a sound card.
1 2 3
JP 3
1 2 3
JP 3
Save to
Factory setting. Enables the
RAM
Save to RAM function.
Disables the Save to RAM function.
JP 4
JP 4
409-00065-000 4/19/00 3:01 PM Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
