NEC E900+ - Manual

4 Controls OSM ™ (On-Screen Manager) control buttons on the front of the monitor function as follows: Main Menu Sub-Menu EXIT Exits the OSM menu. Exits to the OSM controls main menu. CONTROL Moves the highlighted Moves the highlighted area / area up/down to select up/down to select one of the one of...

5 Controls Color Control/AccuColor ® Control System Color presets 1 through 5 selects the desired color setting. The bar is replacedby the color setting choice from 1 to 5. Each color setting is adjusted at thefactory to the stated Kelvin. If a setting is adjusted, the name of the setting willchange...

6 Controls GlobalSync ® Control: Eliminates picture impurities that may result from the earth’s magnetic field. Adjusting the control bar will change the display’s rotationin a clockwise or counterclockwide direction.Note: NEC recommends that you perform GlobalSync correction while running a typical...

Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC ® E 900 + ™ COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or o...

Specifications 9 Monitor MultiSync ® E 900 + ™ Notes Specifications Monitor Picture Tube Diagonal: 19 inch 90 ° deflection, 0.26 mm trio dot pitch, Viewable Image Size: 18.0 inch medium short persistence phosphor, Radius: 1330 mm multi-layered, anti-static screen coating,Invar Shadow Mask and OptiCl...

10 Features OptiClear ® Screen Surface: Reduces reflection and glare and increases contrast without sacrificing focus level, clarity or brightness. Along with the flat squaretechnology CRT, a high contrast screen with 0.26 mm trio dot pitch delivers crisp,clean text and graphics. Invar Shadow Mask: ...

11 Troubleshooting No picture • Display card should be completely seated in its slot.• Power Button and computer power switch should be in the ON position.• Signal cable should be completely connected to display card/computer.• Check connector for bent or pushed-in pins. Image is scrolling or unstab...

References • BBS (978) 635-4706 NEC Technologies’ Remote Bulletin Board System is an electronic serviceaccessible with your system and a modem. Communication parametersare: 300/1200/2400/9600/14.4k/28.8k bps, no parity, 8-data bits,1 stop bit • Customer Service/ Technical Support (800) 632-4662 Fax ...

NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free fromdefects in material and workmanship and, subject to the conditions set forth below, agreesto repair or replace any part of the enclosed unit which proves defective for a period of three(3) years from the date of fir...

15 toxins, PCBs, which are suspected to give rise to similar harm, including reproductive damage infisheating birds and mammals, due to the bio-accumulative* processes. Flame retardants havebeen found in human blood and researchers fear that disturbances in foetus development mayoccur.TCO’95 demand ...

17 Röntgenstrahlung Die in diesem Gerät eerzeugten Rötgenstrahlen sind durch die eigensichere Kathodenstrahlröhreausreichend abgeschirmt.Unsachgemäße Eingriffe, insbesondere Verändern der Hochspannung oder Einbau einesanderen Bilröhrentyps, können dazu führen, daß Rötgenstrahlung in erheblicher Stär...

PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NECTechnologies and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to thisdocument, including...