Page 3 - Sie haben sich; Charakteristik; Der geschlossene Studiohörer; Anschluss; Der Studiohörer DT 150
3 BEDIENUNGSANLEITUNG DT 150 - DT 190 Sie haben sich für den dynamischen Studiokopfhörer DT 150 bzw. für die dynamische Hör-Sprechgarnitur DT 190 von beyerdynamic entschieden. Wir danken für Ihr Vertrauen. Äußerste Präzision bei der Fertigung und eine strenge Qualitätskontrolle garantieren die Zuver...
Page 4 - Anwendung; Schließen Sie den; Kappe mit kleinem
4 vom Fachmann angelötet werden. Bei allen anderen Kabeln mit freien Enden können die Stecker direkt an das Kabel gelö- tet werden (Anschlussbelegung siehe „Schaltbilder“, Seite 8-9). Anwendung Schließen Sie den Studiohörer DT 150 bzw. die Hör- Sprechgarnitur DT 190 an hochwertige Geräte mit der ent...
Page 5 - Pflege; Aus hygenischen Gründen; Sicherheit; Wenn Sie den
5 Wird der Kopfhörer im Stereobetrieb benutzt, sollten im Stecker die Anschlussdrähte für links und rechts getauscht werden, d.h. braun/orange (links) gegen rot/blau (rechts). Außerdem können die Deckel für L + R Kennzeichnung getauscht werden. Das Mikrofon sollten Sie im Abstand von 2 - 3 cm neben ...
Page 7 - Technische Daten; Kennschalldruckpegel
7 K 190.40 - 1,5 M Anschlusskabel, 1,5 m, mit 3-pol. XLR-Stecker und 6,35 mm-Stereo-Klinke . . . . . . . Best.-Nr. 445.894 K 190.40 - 3,0 M Anschlusskabel, 3 m, mit 3-pol. XLR-Stecker und 6,35 mm-Stereo-Klinke . . . . . . . Best.-Nr. 446.750 K 190.41 - 1,5 M Anschlusskabel, 1,5 m, mit 5-pol. XLR-Ste...
Page 8 - Frequenzkurve
8 DT 190 Mikrofon Wandlerprinzip . . . . . . . . . . . dynamisch Übertragungsbereich . . . . . . . 40 - 12.000 Hz Richtcharakteristik . . . . . . . . . Hyperniere Störschallauslöschung . . . . . . 30 dB Ausgangsspannung bei Besprechung aus 5 cm Entfernung . . . . . . . . . . 3 mV Nennimpedanz . . . ...
Page 9 - Thank you for; Design Features; Same as the; Connection; The studio headphone
9 OPERATING INSTRUCTIONS DT 150 - DT 190 Thank you for selecting the DT 150 professional studio headphone or the DT 190 professional headset. They have been made in Germany from high-grade materials and assembled under stringent quality and performance tests to provide you with a professional commun...
Page 10 - Operation; points to the upper end of the boom
10 to fit crimped brass sleeves to the conductors and then solder the sleeve to the connector. If direct solder connections have to be made, use a high-temperature solder-pot to tin the tinsel conductors before making the solder joint to the connector, but be careful that the nylon thread does not m...
Page 11 - Maintenance; As with any; Safety; When plugging in
11 The microphone should be positioned to the side of the mouth, about 20 - 30 mm forward. This will keep it within the direct sound path but out of the breath stream, therefore minimising any ‘pop’ sounds. Of course every user will be different and a degree of experimentation will be necessary to a...
Page 12 - Models; Studio headphone, 250; Supplied Accessories
12 Models DT 150 Studio headphone, 250 Ω , black, with K 100.07 cable (stereo jack 6.35 mm), 3 m long, plug-in type . . . . . . . Order # 455.970 DT 190 Headset, 200/250 Ω , black, with bare-ended K 190.00 cable, 1.5 m long . . . . . . . . . . . . . . . . Order # 455.830 Spares for DT 150 - DT 190 B...
Page 13 - Technical Specifications; Nominal sound pressure; Wiring Diagram DT 150
13 K 190.40 - 1,5 M Connecting cable, 1.5 m, with 3-pin. XLR plug and 1/4" jack plug . . . . . . . . . . . . . . Order # 445.894 K 190.40 - 3,0 M Connecting cable, 3 m, with 3-pin. XLR plug and 1/4" jack plug . . . . . . . . . . . . . . Order # 446.750 K 190.41 - 1,5 M Connecting cable, 1.5 ...
Page 14 - Output voltage at a; Frequency Response Curve
14 DT 190 Microphone Transducer type . . . . . . . . . . . dynamic Frequency response . . . . . . . . 40 - 12.000 Hz Polar pattern . . . . . . . . . . . . . hypercardioid Interference discharging . . . . 30 dB Output voltage at a distance of 5 cm . . . . . . . . . . . 3 mV Nominal output impedance ....
Page 15 - Nous vous félicitons; Description; Casque de studio; Branchements; Ne branchez votre
15 NOTICE D’UTILISATION DT 150 - DT 190 Nous vous félicitons pour l’achat de ce casque / micro- casque professionnel. Pour exploiter au mieux ses possibilités, nous vous conseillons de lire attentivement cette note explicative. Description DT 150 Casque de studio professionnel de type fermé, assuran...
Page 16 - Entretien; Pour des raisons; Soulevez le couvercle avec un
16 Le microphone des micro-casques est d’origine monté côté gauche. En cas de nécessité vous pouvez modifier ce montage pour avoir le micro côté droit. DT 190 Lorsque vous utilisez votre micro-casque en stéréo il faut éga- lement invertir les fils gauche / droite dans le fiche du casque (brun / oran...
Page 17 - Sécurité; Lorsque vous branchez; Exécutions
17 Les mousses de protection «POP» des micros se lavent simple- ment à l’eau tiède. Évitez de les replacer sur le microphone avant qu’elles ne soient totalement sèches. Les oreillettes, le bandeau de l’arceau serre-tête et les mousses «POP» étant soumis à une usure naturelle provoquée par la transpi...
Page 18 - avec fiche XLR, 3 broches et avec
18 Accessoires fournis BN 56-79/A Mousse protection «POP» (pour DT 190) . . . . . . . . . . . . . . . . Art. N° 108.677 Accessoires en option pour DT 150 K 100.00 - 3,0 M Câble droit, 3 m, extrémités libres . . . . . . . . . . . . Art. N° 101.710 K 100.07 - 3,0 M Similaire au K 100.00 mais avec fich...
Page 19 - Spécifications techniques; Fonctionnement acoustique . fermé; Diagramme de câblage DT 150
19 WK 190.00 Câble torsadé, 3 m, extrémités libres . . . . . . . . . . . . Art. N° 448.176 Spécifications techniques DT 150 - DT 190 Écouteurs Type de transducteur . . . . . . . dynamique Fonctionnement acoustique . fermé Bande passante . . . . . . . . . . . 5 à 30.000 Hz Impédance nominale . . . . ...
Page 20 - Impédance de sortie; Courbe de fréquence
20 DT 190 Microphone Type de transducteur . . . . . . . dynamique Bande passante . . . . . . . . . . . 40 - 12.000 Hz Directivité . . . . . . . . . . . . . . . . hypercardioïde Supression de bruit . . . . . . . . 30 dB Voltage de sortie à 5 cm . . . . 3 mV Impédance de sortie nominale . . . . . . . ...