NEC A Series - Manual
NEC A Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING; Canadian Department of Communications Compliance Statement; FCC Information
- Page 3 – Contents
- Page 4 – Quick Start; NOTE: To obtain the MultiSync A
- Page 6 – Brightness/Contrast Controls; Geometry; Color Control/AccuColor; Controls
- Page 7 – Tools
- Page 8 – Recommended Use
- Page 10 – Specifications; Monitor
- Page 12 – Features
- Page 13 – Troubleshooting
- Page 14 – References; INFORMATION
- Page 15 – Limited Warranty
- Page 16 – DECLARATION OF CONFORMITY; NEC Advanced Series
MultiSync
®
A Series
User’s Manual
MultiSync
®
A Series
User’s Manual
NEC Advanced Series
Contents
1
Quick Start
2-3
Controls 4-5
Recommended Use 6-7
Specifications
8-9
Features
10
Troubleshooting
11
References
12
Limited Warranty
13
78131921
5/21/98, 2:25 PM
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGSCAN BE FULLY INSERTED.REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SER...
Your new NEC Technologies MultiSync ® A Series monitor box* should contain the following: • MultiSync A Series Monitor with tilt/swivel base MultiSync A 500 ™ , JC-1576VMA MultiSync A 700 ™ , JC-1736VMA • Power Cord• Captive Signal Cable• User’s Manual• Registration Card Contents Power Cord User’s M...
Quick Start Figure A.1 2 15-pin mini D-SUB Captive Signal Cable To attach the MultiSync ® A Series monitor to your system, follow these instructions: 1. Turn off the power to your computer.2. If necessary, install the display card into your system. For more information, refer to the display card man...