Page 2 - Package Contents
Package Contents Plasma MonitorRemote control and AA BatteriesPower cordUsers Manual (CD-ROM) Start Up Guide (Paper / CD-ROM)Main Power Switch cover and screwCable clamps ••••••• Downloaded From TV-Manual.com Manuals
Page 3 - Table of Contents
Important Safety Instructions ..............................................................................................................English-1Important Information ...........................................................................................................................Englis...
Page 4 - Read Before Operating Equipment.; Important Safety Instructions
English English-1 Read Before Operating Equipment. 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any of the ventilation openings. Install in accordance with ...
Page 5 - Important Information
English-2 WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSI...
Page 6 - CAUTION; Safety Precautions and Maintenance
English English-3 Safety Precautionsand Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MONITOR: Th e plasma display's panel is made up of fi ne picture elements (cells), of which more than 99.99 percent are active cells. Some cells may not produce light ...
Page 7 - Recommended Use; Cleaning the Panel
English-4 Recommended Use CAUTION CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN POSITIONING THE MONITOR: For optimum performance, allow 20 minutes for warm-up. Rest your eyes periodically by focusing on an object at least 5 feet a...
Page 8 - Plasma monitor driving sound; OPERATING ENVIRONMENT
English English-5 Recommended Use - continued To avoid or minimize image retention : Like all phosphor-based display devices and all other gas plasma displays, plasma monitors can be susceptible to image retention under certain circumstances. Certain operating conditions, such as the continuous disp...
Page 9 - Installation
English-6 Using Optional Stand/Mounts An optional stand or mounting apparatus can be installed either while the unit is in the upright position or while the unit is face-down. To install the stand while in the upright position, lower the monitor onto to the feet as shown (Figure 1). Use the handles ...
Page 10 - Mounting on Ceiling
English English-7 Mounting on Ceiling Ensure that the ceiling is sturdy enough to support the weight of the unit and the mounting apparatus over time, against earthquakes, unexpected vibrations, and other external forces. Be sure the unit is mounted to a solid structure within the ceiling, such as a...
Page 12 - Part Names and Functions; Control Panel
English English-9 Part Names and Functions Control Panel 1) POWER Switches the power on/standby. 2) MUTE Switches the audio mute ON/OFF. 3) INPUT Switches between input sources.Acts as SET button within the OSD menu. 4) PLUS (+) Increases the setting adjustment within OSD menu. 5) MINUS (-) Decrease...
Page 13 - Terminal Panel
English-10 EXTERNAL CONTROL OUT 2 IN DVD/HD3 S-VIDEO IN DVI AUDIO3 R L (MONO) R L (MONO) R L (MONO) AUDIO2 AUDIO1 VGA Y Cr/Pr Cb/Pb DVD/HD1 DVD/HD2 IN VIDEO AC IN R L SPEAKER (S) 1 3 4 5 6 7 8 10 9 12 11 13 14 Part Names and Functions 1) EXTERNAL CONTROL OUT (D-Sub 9 pin) Connect RS-232C output to a...
Page 14 - Remote Control Functions
English English-11 Part Names and Functions - continued 1) POWER ON/STANDBY Switches the power on/standby. *If the Power Indicator on the display is not glowing, then no controls will work. 2) VIDEO Switches the input signal to the VIDEO source. 3) RGB Switches the input signal to the RGB source. 4)...
Page 15 - POWER; To turn the unit ON and OFF:
English-12 POWER To turn the unit ON and OFF: 1. Plug the power cord into an AC outlet. 2. Press the Power button (on the unit). Th e monitor's ON/STANDBY indicator turns red and the unit will be in STANDBY mode. 3. Press the POWER ON button on the remote control. Th e ON/STANDBY indicator will turn...
Page 16 - REMOTE CONTROL ID; TO SET REMOTE CONTROL ID:; TO USE REMOTE CONTROL ID MODE; Remote Control ID Function
English English-13 REMOTE CONTROL ID Th e remote control included with the display can be used to control up to 26 individual monitors using what is called the REMOTE CONTROL ID mode. Th e REMOTE CONTROL ID mode works in conjunction with the Monitor ID, allowing control of up to 26 individual monito...
Page 17 - Using the OSD
English-14 On-Screen Display (OSD) Using the OSD Use the Remote Control or the control panel on the front of the unit to enter the on-screen display menu to adjust settings. 1. Press the MENU button on the remote or the EXIT button on the Control Panel. 2. Use the up and down buttons to select the d...
Page 21 - Operation; Picture Size Using Video Signals
English-18 Operation Picture Size Using Video Signals Select one of seven picture sizes manually. While viewing videos or digital video discs, perform the following actions: 1. Press the SIZE button on the remote control. 2. To switch the screen sizes, press the SIZE button again within 3 seconds. T...
Page 23 - Split Screen Mode; Side by Side Mode
English-20 Operation - continued Split Screen Mode To display multiple pictures on the screen, perform the following actions: 1. Press the desired SPLIT SCREEN function button on the remote (PIP, S BY S, SINGLE). Only certain RGB signals are supported. Split Screen mode works according to the table ...
Page 24 - Displaying Input Signal; Adjusting the OSD controls
English English-21 Picture-in-Picture Mode Press the + and - buttons to change the position of the sub-picture. Press the p and q buttons to change the size of the sub- picture. Press the SELECT/FREEZE button to change the active picture. Displaying Input Signal 1. To make the desired picture active...
Page 25 - Picture Settings Menu
English-22 Operation - continued Picture Settings Menu Storing picture settings Th is function stores the current input signal and PICTURE menu settings in memory in order to recall these settings if necessary. Up to six diff erent settings can be stored. Notes of up to 15 characters long can also b...
Page 26 - MONITOR ID and RS-232C CONTROL
English English-23 Th is monitor uses R XD, TXD and GND lines for RS-232C control. Th e reverse type cable (null modem cable) should be used for RS-232C control. Th is Plasma monitor can be controlled via personal computer using an RS-232C connection. MONITOR ID and RS-232C CONTROL Up to 26 individu...
Page 27 - ) Control command diagram
English-24 RS-232C - continued Th e following control sequence is used for a single monitor When using the following control commands, all of the daisy-chained monitors can be controlled at the same time from the primary monitor. However, reply and status commands will only pertain to the primary mo...
Page 28 - ) Control sequence
English English-25 RS-232C - continued 3) Control sequence 1) Th e command from a computer to the Plasma monitor will take 400ms. 2) Th e Plasma monitor will send a return command 400ms* aft er it has received an encode. If the command is not received correctly, the Plasma monitor will not send the ...
Page 30 - Troubleshooting
English English-27 Troubleshooting No picture Th e signal cable should be properly connected to the display card/computer.Th e display card should be properly seated in its slot. Front Power Switch and computer power switch should be in the ON position.Check to make sure that a supported mode has be...
Page 40 - Pin Assignment
English English-37 Pin Assignment 1) Analog RGB Input (Mini D-SUB 15P) VGA Pin No. Name 1 Video Signal Red 2 Video Signal Green 3 Video Signal Blue 4 GND 5 DDC-GND 6 Red-GND 7 Green-GND 8 Blue-GND 9 +5V (DDC) 10 SYNC-GND 11 GND 12 DDC-SDA 13 H-SYNC 14 V-SYNC 15 DDC-SCL 2) Digital RGB Input (DVI-D) D...
Page 41 - DECLARATION OF CONFORMITY
DECLARATION OF CONFORMITY Th is device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) Th is device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ...
