Page 2 - Informations du fabricant relatives au; Index
Warning .................................................................................................................... 1 Contents ...................................................................................................................2 Quick Start ......................................
Page 3 - WARNING
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERS...
Page 4 - Contents
2 Contents * Remember to save your original box and packing material to transport or ship the monitor. Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD monitor • Power Cord• User’s Manual• Video Signal Cable• Audio Cable (LCD175VXM+ only) • Base Stand• Cable Hold...
Page 5 - Quick Start; To unfold stand, follow these instructions:; Handle with care when pulling the stand.
3 Quick Start To unfold stand, follow these instructions: . Place monitor face down on a non-abrasive surface ( Figure 1 ). 2. Pull the stand holding the monitor with the other hand until the stand clicks ( Figure 2 ). NOTE: Handle with care when pulling the stand. NOTE: Reverse process to re-pack m...
Page 9 - Connecting a Flexible Arm; Replace screws; Specifications
7 Connecting a Flexible Arm This LCD monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) as shown in the picture when installing.To meet the safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability under consideration of t...
Page 10 - Controls; monitor function as follows:; Button; Basic key function
8 Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: OSD displayed Shortcut to bright adjust window Button OSD Off Shortcut to contrast adjust window Select Input Signal OSD On (Icon selection stage) Go to Adjustment stage Cursor moves left Cursor moves...
Page 11 - To mute the speaker output, press the
9 Controls - continued AUDIO (LCD175VXM+ Only) Controls the volume of the speakers or headphones. To mute the speaker output, press the “1<->2 / RESET” button. BRIGHTNESS Adjusts the overall image and background screen brightness. CONTRAST Adjusts the image brightness in relation to the backgr...
Page 12 - No Signal; If ON is selected, a message will appear on the screen after 30
0 Controls - continued OSD Warning: OSD Warning menus disappear with SELECT button. NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or when there is a change of input signal or video is inactive, the No Signal window will appear. RESOLUTION NOTIFIER...
Page 13 - Safety Precautions and Maintenance; FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE; local or federal law.; Recommended Use; CAUTION
Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other ris...
Page 14 - Ergonomics; CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR
2 • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 6 inches and no further away t...
Page 15 - Monitor
3 Specifications * Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologie...
Page 18 - Features
6 Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another. AccuColor ® Control System : Allows ...
Page 19 - Troubleshooting
7 Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been se...
Page 20 - References; NEC Monitor Customer Service & Support; Warranty Information:; Online Technical Support; Sales Information Line:; Electronic Channels; Product Registration:; Drivers and Downloads
8 References NEC Monitor Customer Service & Support Customer Service and Technical Support: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/MacintoshCable Adapter: (800) 632-4662 Warranty Information: www.necdisplay.com Online Technical Support www.necdisplay.com Sales and Product Infor...
Page 21 - Limited Warranty
9 Limited Warranty NEC Display Solutions of America, Inc. (hereinafter “NEC DISPLAY SOLUTIONS”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NEC DISPLAY SOLUTIONS’ sole option) any part of th...
Page 24 - Declaration of the Manufacturer; We hereby certify that the color moni-
22 Declaration of the Manufacturer We hereby certify that the color moni- tor MultiSync LCD75VX+(L74F)/ LCD75VXM+(L74F)/ LCD95VX+(L94F2) are in compliance with Council Directive 73/23/EEC: – EN 60950- Council Directive 89/336/EEC: – EN 55022 – EN 6000-3-2 – EN 6000-3-3 – EN 55024 and marked with NEC...
Page 25 - AVERTISSEMENT; Informations FCC
23 AFIN D’ÉVITER TOUT RISQUE D’INCENDIE OU D’ÉLECTROCUTION, NE PAS EXPOSER CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ. NE PAS UTILISER LA FICHE D’ALIMENTATION POLARISÉE AVEC UNE PRISE DE CORDON DE RALLONGE OU AUTRE PRISE SAUF SI LES BROCHES PEUVENT ÊTRE ENTIÈREMENT INTRODUITES. NE PAS OUVRIR LE BOÎTIER...
Page 26 - La boîte* de votre nouveau moniteur NEC MultiSync LCD contient :; Contenu
24 La boîte* de votre nouveau moniteur NEC MultiSync LCD contient : • Moniteur MultiSync LCD• Cordon d’alimentation • Manuel de l’utilisateur • Câble pour le signal vidéo• Câble d’audio• Cache-câbles * Ne pas oublier de conserver la boîte et le matériel d’emballage d’origine pour transporter ou expé...
Page 27 - Mise en marche rapide; Pour tirer le support, suivez les instructions suivantes :; . Placez le moniteur face vers le bas sur une surface non abrasive
25 Pour raccorder le moniteur MultiSync LCD au système,suivez les directives ciaprès: . Mettez l’ordinateur hors tension.2. Pour le MAC ou le PC avec sortie numérique DVI Branchez le câble de signal DVI au connecteu de la carte d’écran de votre système ( Figure A.1 ). Serrez toutes les vis avant de ...
Page 30 - Incliner; Élévation et abaissement de l’écran du
28 Mise en marche rapide (suite) Incliner Attrapez des deux mains l’écran du moniteur par les deux côtés et réglez l’inclinaison et l’orientation selon votre goût. (Figure TS.1) REMARQUE : Manipulez avec soin en inclinant l’écran de moniteur. Élévation et abaissement de l’écran du moniteur Le monite...
Page 31 - Connexion d’un bras souple; Fiche Technique
29 Connexion d’un bras souple Ce moniteur LCD a été conçu pour être utilisé avec un bras flexible. Utiliser les vis fournies (4pièces) lors de l’installation comme indiqué sur la figure.Le moniteur doit être installé sur un bras garantissant la stabilité nécessaire correspon- dant au poids du monite...
Page 32 - Commandes; Les boutons de réglage OSD; Fonction de la touche de base
30 Commandes Appuyer sur la touche « SELECT » 2. Structure OSD (e.g. LCD175VXM+) Menu principal (Icône Sélectionner , Entrée analogique) Sous-menu (Icon Sélectionner) Appuyer sur la touche « SELECT » Menu principal (Régler) Sous-menu (Régler) Appuyer sur la touche « SELECT » Appuyer sur la touche « ...
Page 34 - La sélection de QUITTER permet de quitter le menu/sous-menu OSD.
32 Commandes (suite) Avertissement OSD: OSD prémunissant menu disparaît sur SELECT bouton. PAS DE SIGNAL: Cette fonctionne vous avertit de l’absence de signal. Après la mise sous tension ou si le signal d’entrée a été changé ou si la vidéo est inac-tive, la fenêtre PAS DE SIGNAL s’affiche. ERREUR RE...
Page 35 - Usage recommandé; Consignes de sécurité et d’entretien; POUR UN FONCTIONNEMENT OPTIMAL, PRIÈRE DE NOTER; l’évacuation des déchets.
33 Usage recommandé Consignes de sécurité et d’entretien POUR UN FONCTIONNEMENT OPTIMAL, PRIÈRE DE NOTER CE QUI SUIT POUR LE RÉGLAGE ET L’UTILISATION DU MONITEUR COULEUR MULTISYNC LCD : • NE PAS OUVRIR LE MONITEUR. Aucune pièce intérieure ne nécessite l’intervention de l’utilisateur, et l’ouverture ...
Page 37 - Fiche technique; du moniteur
35 Fiche technique * Résolutions interpolées : Quand les résolutions affichées sont inférieures au nombre de pixels du module LCD, le texte peut apparaître craquelé et les lignes plus épaisses. Ceci est normal et nécessaire pour toutes les technologies d’affichage sur panneaux plats pour lesquels ch...
Page 40 - Fonctions
38 Fonctions Encombrement réduit : Constitue la solution idéale pour les environnements qui nécessitent une image de haute qualité et un encombrement et un poids limités. L’encombrement réduit et le faible poids du moniteur permettent de le déplacer ou de le transporter rapidement d’un point à un au...
Page 41 - Dépannage
39 Dépannage Pas d’image • Le câble vidéo doit être bien connecté à la carte d’affichage et à l’ordinateur. • La carte d’affichage doit être insérée à fond dans son logement. • Les interrupteurs d’alimentation du moniteur à l’avantet de l’ordinateur doivent être sur la position MARCHE. • Vérifiez qu...
Page 42 - Références; Service à la clientèle et assistance technique du moniteur NEC
40 Références Service à la clientèle et assistance technique du moniteur NEC Service à la clientèle et assistance technique: (800) 632-4662 Télécopieur: (800) 695-3044 Pièces et accessoires/adaptateur de câble Macintosh: (800) 632-4662 Information sur la garantie: www.necdisplay.com Assistance techn...
Page 43 - Garantie limitée
4 Garantie limitée NEC Display Solutions of America, Inc. (ci-après «NEC DISPLAY SOLUTIONS») garantit que ce produit est exempt de vice de fabrication et de main-d’oeuvre et, selon les conditions énoncées ci-dessous, accepte de réparer ou remplacer, à sa discrétion, toute pièce de l’appareil concern...
Page 46 - Déclaration du fabricant; Nous certifions par la présente
Déclaration du fabricant Nous certifions par la présente que les moniteurs MultiSync LCD75VX+(L74F)/ LCD75VXM+(L74F)/ LCD95VX+(L94F2) sont conformes à la directive 73/23/EEC du Counseil: – EN 60950- la directive 89/336/EEC du Counseil: – EN 55022 – EN 6000-3-2 – EN 6000-3-3 – EN 55024 et porte le si...
Page 47 - DÉCLARATION DE CONFORMITÉ; Série LCD NEC
AVIS DE PROPRI É T É EXCLUSIVE ET DE D É GAGEMENT DE RESPONSABILIT É Les informations contenues dans ce document, y compris tous les designs et matériel s’y rapportant, sont la propriété de NEC Display Solutions of America, Inc. et/ou ses concédants. NEC Display Solutions of America, Inc. se réserve...
Page 49 - Información FCC
47 PRECAUCIÓN: ADVERTENCIA: PARA REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA, ASEGÚRESE DE QUE EL CABLE DE ALIMENTACIÓN ESTÉ DESENCHUFADO DEL TOMACORRIENTES DE LA PARED. PARA DESCONECTAR COMPLETAMENTE LA CORRIENTE DE LA UNIDAD, DESCONECTE EL CABLE DE ALIMENTACIÓN DEL TOMACORRIENTES CA. NO QUITE LA TAPA ...
Page 50 - Contenidos; La caja del monitor NEC MultiSync LCD* debe contener lo siguiente:
48 Contenidos * Recuerde guardar la caja y el material de embalaje original para transportar o enviar el monitor. La caja del monitor NEC MultiSync LCD* debe contener lo siguiente: • Monitor MultiSync LCD • Cable de alimentación• Manual del usuario• Señal de cable de video• Cable Audio• Soporte de b...
Page 51 - Inicio rápido; Para quitar el soporte, siga estas instrucciones:
49 Inicio rápido Para quitar el soporte, siga estas instrucciones: . Sitúe el monitor boca abajo en una superficie no abrasiva (figura 1) . 2. Extraiga el soporte sujetando el monitor con la otra mano hasta que el soporte haga clic (figura 2) . NOTA: Retire el soporte del monitor con cuidado. NOTA: ...
Page 53 - descripción completa de estos controles OSD.
5 Figura C. Figura B. Entrada (VGA) Sujetador de cables Cable de alimentación Entrada (DVI) botón encendido Cable de audio 7. El ajuste automático sin contacto ajusta automáticamente el monitor en los valores óptimos durante la configuración inicial para la mayoría de las temporizaciones. Para reali...
Page 55 - Cómo conectar un brazo flexible; Reemplace los tornillos; Especificaciones
53 Cómo conectar un brazo flexible Este monitor LCD está diseñado para utilizarse con un brazo flexible. Cuando realice la instalación, use los tornillos provistos (4 piezas) como se muestra en el gráfico.Para cumplir con los requisitos de seguridad, el monitor debe montarse en un brazo que garantic...
Page 56 - Controles; . Funciones básicas de las teclas
54 Controles Los botones de control OSD (Administrador en pantalla), ubicados en la parte frontal del monitor, funcionan de la siguiente manera: OSD en pantalla Acceso directo a la ventana de ajuste de brillo Button OSD Apagado Acceso directo a la ventana de ajuste de contraste Selección de señal de...
Page 58 - NOTIFICADOR DE RESOLUCIÓN:
56 Advertencia OSD: Los menús de advertencia OSD desaparecen con el botón SELECT. SIN SEÑAL: Esta función envía una advertencia cuando no hay señal. Después de presionar el botón de encendido, cuando hay un cambio de la señal de entrada o si el video esta inactivo, aparecerá la ventana Sin señal. NO...
Page 59 - Uso recomendado; estatal, local o federal correspondiente.; Precauciones de seguridad y mantenimiento; PARA UN RENDIMIENTO ÓPTIMO, OBSERVE LO; Precauciones
57 Uso recomendado • NO ABRA EL MONITOR. No hay piezas en el interior que el usuario pueda utilizar y al abrir o sacar tapas puede exponerse a peligrosas descargas eléctricas u otros riesgos. Consulte a personal de mantenimiento capacitado. • No derrame líquidos en el gabinete ni use su monitor cerc...
Page 61 - Especificaciones del
59 Especificaciones Especificaciones del monitor MultiSync ® LCD175VX+ Notas Módulo LCD Diagonal: Tamaño de la imagen visible: Resolución nativa (cuenta de píxeles): 7.0 pulgadas 7.0 pulgadas 280 x 024 Matriz activa; transistor de película delgada (TFT), pantalla de cristal líquido (LCD); tamaño de ...
Page 64 - Características
62 Características Tamaño reducido: Brinda la solución ideal para entornos que requieren una calidad de imagen superior pero con limitaciones de tamaño y peso. El tamaño pequeño y el bajo peso del monitor permiten trasladarlo o transportarlo fácilmente de un lugar a otro. Sistemas de control AccuCol...
Page 65 - Solución de problemas; Sin imagen
63 Solución de problemas Sin imagen • El cable de señal debe estar conectado por completo a la tarjeta de visualización/com- putadora. • La tarjeta de visualización debe estar colocada por completo en la ranura. • El botón de encendido frontal y el botón de encendido de la computadora deben estar en...
Page 66 - El LED en el monitor no está encendido; La imagen de la pantalla no posee el tamaño apropiado; Sin video
64 El LED en el monitor no está encendido (no se ve ni un color verde ni ámbar) • El botón de encendido debe estar en la posición de ENCENDIDO y el cable de aliment- ación debe estar conectado. La imagen de la pantalla no posee el tamaño apropiado • Use los controles de ajuste de la imagen de OSD pa...
Page 67 - Referencias
65 Servicio de atención y asistencia al cliente de monitores NEC Servicio de atención al cliente y soporte técnico: (800) 632-4662 Fax: (800) 695-3044 Piezas y accesorios/Macintosh Adaptador de cable: (800) 632-4662 Información sobre la garantía: www.necdisplay.com Soporte técnico en línea www.necdi...
Page 68 - Garantía limitada
66 Garantía limitada NEC Display Solutions of America, Inc. (de aquí en más “NEC DISPLAY SOLUTIONS”) garantiza que este Producto está libre de defectos de material y fabricación y que está sujeto a las condiciones aquí expuestas, acepta reparar o reemplazar (a exclusivo criterio de NEC DISPLAY SOLUT...
Page 71 - Declaración del fabricanter; Por la presente certificamos que el monitor
Declaración del fabricanter Por la presente certificamos que el monitor a color MultiSync LCD75VX+(L74F)/ LCD75VXM+(L74F)/ LCD95VX+(L94F2) cumplen con Directiva municipal 73/23/EEC: – EN 60950- Council Directive 89/336/EEC: – EN 55022 – EN 6000-3-2 – EN 6000-3-3 – EN 55024 y presentan la marca NEC D...
Page 72 - DECLARACIÓN DE CONFORMIDAD; Serie LCD de NEC
DECLARACIÓN DE DERECHOS DE PROPIEDAD Y DESCARGO DE RESPONSABILIDAD La información divulgada en este documento, incluidos todos los diseños y materiales relacionados, es propiedad de valor de NEC Display Solutions of America, Inc. y/o sus licenciatarios, según corresponda, se reservan todos los derec...
Page 76 - PROPRIETARY NOTICE AND LIABILITY DISCLAIMER; DECLARATION OF CONFORMITY; NEC LCD Series
Part No. 000000000 Printed in China PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Display Solutions of America, Inc. and/or its licensors, as appropriate, reserve all patent, copyri...