NEC 16x - Manual - manualsarea.com

Page 2 - Table of Contents

1 Table of Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Hardware System Requirements . . . . . . . . . . . . . . . . . . . . . . 3Drive Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Using Your Drive . . . . . . ...

Page 3 - Welcome; Thank you

2 Welcome Thank you for purchasing the NEC 16x DVD±R/RW DL drive. Please remove your service tag sticker found on theouter carton’s label. This label contains your drive’s servicetag number and model number and can be placed in thespace below or can be affixed to the outer cover of your PC.You will ...

Page 4 - Minimum; Recommended

Hardware System Requirements Minimum ■ Intel ® Pentium ® III 800 MHz. ■ 256 MB memory. ■ Used for such things as data backup. Recommended ■ Intel Pentium 4 1.0 GHz. ■ 512 MB memory. ■ Highly recommended for all DVD recording. 3

Page 5 - Drive Installation; This is

4 Drive Installation ! Shut down your computer and disconnect all cablesplugged into the computer. [Fig. 1] @ Remove the computer’s case (refer to your computer’sdocumentation). # Once the cover is removed, touch a non-painted metalsurface (i.e. the power supply) to ground yourself. This is an impor...

Page 6 - Jumper Setting Tutorial:

Jumper Setting Tutorial: There are three possible jumper settings: MASTER, SLAVE,and CABLE SELECT (CSEL). When two drives are connectedto the same interface cable, one must be set to MASTER, andone set to SLAVE. Alternatively, both drives may be set toCABLE SELECT, in which case the system defines w...

Page 7 - Using Your Drive

6 Using Your Drive Busy Indicator LED: Lights up when reading or writing data. Eject Button: Press to load or unload a disc. Disc Tray: Open or close by pressing the eject button. Load discs into the tray with the label side facing up. Forced Eject Hole: If the eject button will not open the tray, i...

Page 8 - About DVD Media Types; Media compatibility

About DVD Media Types Media compatibility Disc Types NEC Supports DVD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ReadDVD-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ReadDVD+R (SL, DL) . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 9 - Product Specifications

8 Product Specifications Read Speed: 16x max. DVD-ROM and 48x max. CD-ROM Write Speed: DVD+R: 16x max., DVD+RW: 8x max., DVD+R DL: 4x max., DVD-R: 16x max., DVD-RW: 6x max., CD-R: 48x max., CD-RW: 24x max. Access Time: 120 ms (CD), 140 ms (DVD) Mechanism: Motorized tray load mechanism for horizontal...

Page 10 - Disc Care

Disc Care ■ To clean the disc, use a soft cloth and wipe from theinside to the outside edge rather than in a circular motion. ■ Do not use record-cleaning or anti-static agents as thesolutions may damage a disc. ■ Always store discs in proper storage cases when not in use. ■ Check for dirt, dust, or...

Page 11 - Technical Support; Nothing happens when eject button is pressed:; Still having problems?

10 Troubleshooting & Technical Support Nothing happens when eject button is pressed: ■ Make sure the power cable is securely connected to the drive. ■ Verify the computer is powered-up and running. Drive has power (responds to eject button), but isnot recognized by computer: ■ Verify the interfa...

Page 12 - Warranty Information

Warranty Information ONE (1) YEAR LIMITED WARRANTY NEC Solutions (America), Inc. (“NECSAM”) warrants this hardware product (“Product”) against defects in material andworkmanship for a period of one year from the date of original purchase (as established by the date of purchase onyour sales receipt) ...

NEC 16x - Manual

Table of Contents:

Summary

Other NEC Models