Musical Fidelity X-80 - Manual

Musical Fidelity X-80 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1

2

3

4

Page: / 4 Go to

Next Page

PDF Text Table of Contents

Table of Contents:

• Page 2 – It must not be plugged into a mains outlet.; WARNING - This appliance must be earthed; If connecting to a BS1363 plug, a 13 amp fuse must be used.; POWER button on the X-80; front panel one or more times.; TAPE RECORD; SAFETY INFORMATION
• Page 3 – INSTALLATION PRECAUTIONS and USER INFORMATION; INPUT; CONNECTIONS; OUTPUT; RIGHT SPEAKER outputs.; PRE-AMPLIFIER OUTPUT; PRE OUT RCA sockets
• Page 4 – REMOTE CONTROL; MUTE button mutes the SPEAKER output and PRE-OUT sockets, but has no; and the red LED will go out.; CONNECTIONS & FACILITIES; Front panel layout; CAUTION; VOLUME; Audio; MUTE button

Loading the manual

Issue 4 May 2004

X-80 Integrated Amplifier Page 1 of 8

X-80 Integrated Amplifier Page 8 of 8

X-80 SPECIFICATIONS

INSTRUCTIONS FOR USE

Thank you for purchasing the Musical Fidelity

X-80 Integrated amplifier.

Used properly and carefully, it should give you many years of

outstanding musical reproduction.

Aesthetically, the X-80 Integrated amplifier is a perfect match for the

X-RAY CD player and X-PLORA FM tuner.

Together, they form one of the finest hi-fi systems available.

Dust regularly with a soft cloth or soft brush, but be careful when

using cleaning or polishing agents - they may harm the surface finish.

If you have any questions about your audio system,

please consult your dealer who is there to help and advise.

X-80

DUAL MONO INTEGRATED AMPLIFIER

Output :

Voltage RMS :

21 Volts 20Hz to 20kHz, one channel loaded

Peak :

59 Volts

Power :

55 Watts one channel into 8 Ohms (17.4dBW)
85 Watts one channel into 4 Ohms

Peak-to-peak output current :

28 Amps

Damping factor :

77

Output devices per channel :

2

Pre-output impedance :

50 Ohms

Line inputs :

Total harmonic distortion + noise :

< 0

.

02% 20Hz to 20kHz

Signal / noise ratio :

> 93dB ‘A’-weighted

Input sensitivity for 55Watts, 8 Ohms :

175mV

Input impedance :

220k Ohms

Overload margin :

29dB

Channel separation :

> 55dB typical

Frequency response :

20Hz to 20kHz, + 0, - 0

.

4dB

Input facilities :

4 pairs line level RCA connectors

Output facilities :

2 amplifier channels via 1 pair per channel binding posts.
1 pair RCA audio outputs controlled by the volume,
1 pair RCA tape record fixed line level output.

Power requirement :

100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set),
190 Watts maximum into 8 Ohms, 15 Watts idle.

Dimensions :

218mm, 8.6 inches wide

98mm, 3.8 inches high (including feet)

339mm, 13.4 inches deep

(including knob and rear terminals)

Weight :

6.5 kg, 14.3 lbs unit only, unboxed

8 kg, 17.7 lbs in shipping carton

Standard accessories :

IEC type mains lead (10-Amp), remote control,
2 batteries size LR03 or AAA, manganese alkaline type

Musical Fidelity reserves the right to make improvements which may result in specification

or feature changes without notice.

Other Musical Fidelity Models

• Musical Fidelity KW250S
  • Manual
• Musical Fidelity A5
  • Manual
• Musical Fidelity V-PSUII
  • Manual
• Musical Fidelity A1001
  • Manual
• Musical Fidelity X-150
  • Manual
• Musical Fidelity A1
  • Manual
• Musical Fidelity M250
  • Manual
• Musical Fidelity X-RAY V3
  • Manual
• Musical Fidelity M3CD
  • Manual
• Musical Fidelity A5 CR
  • Manual