Musical Fidelity X-24K - Manual

A user manual for the Musical Fidelity X-24K Digital-to-Audio Converter outlines its advanced audio processing capabilities, emphasizing high-resolution 24-bit digital-to-analog conversion with support for multiple input/output standards. The document covers technical specifications such as sampling rates, frequency response, and compliance certifications while addressing setup requirements, including proper cable connections and environmental precautions to ensure optimal performance and avoid interference.

Loading the manual

SPECIFICATIONS

Musical Fidelity reserves the right to make improvements which may result in specification or

feature changes without notice.

Note : This product has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC rules, operation is subject to two conditions:
1 - This device may not cause harmful interference.
2 - This device must accept any interference received including interference that may cause
undesired operation.
These limits are designed to reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed in accordance with the instructions may cause harmful interference to radio
communications. However as there can be no guarantee that interference will not occur in a
particular installation we recommend that you take one or more of the following measures if
interference is experienced:

- Identify the source of interference, turn the X-24K off and on, does the interference persist?
- Re-orientate or relocate the receiving antenna.
- Increase the separation between the X-24K and receiver.
- Connect the X-24K and receiver to different mains outlet circuits.
- Consult your dealer or an experienced radio/TV technician.

WARNING

ANY MODIFICATIONS OR CHANGES TO THIS UNIT NOT EXPRESSLY

APPROVED BY MUSICAL FIDELITY WHO ARE THE PARTY RESPONSIBLE FOR
COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THIS
EQUIPMENT.

Multistandard 24 Bit

Digital to Analog converter

INSTRUCTIONS FOR USE

DAC architecture

24 bit Delta-Sigma (Bitstream)
8x oversampling

Sampling frequencies

32kHz, 44.1kHz, 48kHz, 88.2kHz and 96kHz

Data types

Supports 16, 18, 20 and 24 bit word length

Inputs

Input 1: 75

Ω

S/PDIF coaxial or TOSLINK optical

Input 2: 75

Ω

S/PDIF coaxial.

Outputs

Left and Right analog audio
75

Ω

S/PDIF digital recording/loop out

Frequency response

10Hz - 20kHz + 0.2dB

S/N ratio

> 96dB unweighted
> 105dB 'A' weighted

THD

< 0.006% 10Hz - 20kHz unweighted
< 0.003% 10Hz - 20 kHz 'A' weighted

De-emphasis

< + 0.1dB error, automatically selects correct
curve for 32kHz, 44.1kHz or 48kHz

Linearity

< + 0.3dB to -100dB

Dimensions (approx.)

110 x 110 x 330mm (W x H x D)
Height and width include feet,
depth includes terminals

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.