Musical Fidelity X-150 - Manual

Musical Fidelity X-150

A user manual for the Musical Fidelity X-150 integrated amplifier covers its core functionality, emphasizing technical specifications like electrical ratings, input/output configurations, and physical dimensions. The guide includes essential operational topics such as safety protocols–including UK-specific mains installation warnings–and proper handling to prevent damage from water or heat. It also addresses connectivity for phono and line-level sources, speaker outputs, and remote control operation, ensuring users can configure the device safely and effectively.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
Page: / 4

Table of Contents:

  • Page 1 – Technical Specifications and Front Panel Diagram
  • Page 2 – Safety Instructions and Initial Setup Guidance
  • Page 3 – Connection Guidelines and Environmental Precautions
  • Page 4 – Panel Layout and Remote Control Operation
Loading the manual
Page 1

Issue 4 May 2004

X-150 Integrated Amplifier Page 1 of 8

X-150 Integrated Amplifier Page 8 of 8

X-150 SPECIFICATIONS

INSTRUCTIONS FOR USE

Thank you for purchasing the Musical Fidelity

X-150 Integrated amplifier.

Used properly and carefully, it should give you many years of

outstanding musical reproduction.

Aesthetically, the X-150 Integrated amplifier is a

perfect match for the X-RAY Version 3 CD player.

Together, they form one of the finest hi-fi systems available.

Dust regularly with a soft cloth or soft brush, but be careful when

using cleaning or polishing agents - they may harm the surface finish.

If you have any questions about your audio system,

please consult your dealer who is there to help and advise.

X-150

DUAL MONO INTEGRATED AMPLIFIER

Output :

Voltage RMS :

29 Volts 20Hz to 20kHz, one channel loaded

Peak :

82 Volts

Power :

105 Watts one channel into 8 Ohms (20dBW),
141 Watts one channel into 4 Ohms

Peak-to-peak output current :

50 Amps

Damping factor :

80

Output devices per channel :

4

Pre-output impedance :

50 Ohms

Line inputs :

Total harmonic distortion + noise :

< 0

.

01% 20Hz to 20kHz

Signal / noise ratio :

> 98dB ‘A’-weighted

Input sensitivity for 105Watts, 8 Ohms :

250mV

Input impedance :

220k Ohms

Overload margin :

26dB

Channel separation :

> 70dB typical

Frequency response :

20Hz to 20kHz, + 0, - 0

.

2dB

Phono input :

Frequency response reference
IEC RIAA - see graph . . .

Signal / noise ratio :

> 94dB ‘A’-weighted

Input sensitivity :

2

.

5mV Moving Magnet

Input impedance :

47k Ohms

Overload margin :

24dB

Input facilities :

3 pairs line level RCA connectors,
1 pair phono RCA connectors

Output facilities :

2 amplifier channels via 1 pair per channel binding posts.
1 pair RCA audio outputs controlled by the volume,
1 pair RCA tape record fixed line level output.

Power requirement :

100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set),
320 Watts maximum into 8 Ohms, 32 Watts idle

Dimensions :

218mm, 8.6 inches wide

98mm, 3.8 inches high (including feet)

377mm, 14.9 inches deep

(including knob and rear terminals)

Weight :

6.5 kg, 14.3 lbs unit only, unboxed

8 kg, 17.7 lbs in shipping carton

Standard accessories :

IEC type mains lead (10-Amp), remote control,
2 batteries size LR03 or AAA, manganese alkaline type

Musical Fidelity reserves the right to make improvements which

may result in specification or feature changes without notice.

-25

-20

-15

-10

-5

0

5

10

15

20

25

10

16

25

40

63

100

160

250

400

630 1.25K 2K 3.15K 5K

8K 12.5K 20K

FREQUENCY (Hz)

dB

IEC

RIAA

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand
Musical Fidelity
Model
X-150
Document type
Manual
Language(s)
English
Pages
4
File size
205.7 KB
Format
PDF

Summary

Page 1 - Technical Specifications and Front Panel Diagram

Details on electrical parameters, input/output facilities, physical dimensions, weight, and the front panel layout of the integrated amplifier.

Page 2 - Safety Instructions and Initial Setup Guidance

Safety warnings regarding mains lead installation, earthing precautions, electric shock prevention, and procedures for powering on and setting up tape recording.

Page 3 - Connection Guidelines and Environmental Precautions

Instructions for connecting phono and line-level sources, speaker/pre-amplifier outputs, installation precautions, handling heat and water, and managing radio frequency interference.

Ask a question

Up to 3 photos. Max 5 MB each. Formats: JPG, JPEG, PNG, WebP.