Multi-Tech Systems MTS2BTA - Manual

Chapter 1 – Description and Specifications Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) 6 General Safety The adapter is designed and intended to be used in either fixed or mobile applications. In the “Fixed” application, the device is physically secured at one location ...

Chapter 1 – Description and Specifications Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) 7 Technical Specifications Category Description Serial Interface Supports speeds from 1200bps to 230Kbps RF Interface Frequency ………………2402 – 2480MHz Modulation ……………...FHSS/GFSK Chan...

Chapter 1 – Description and Specifications Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) 8 Category Description Intelligent Features Can be configured, commanded, and controlled through simple ASCII strings over the Bluetooth RF link or directly through the hardware seri...

Chapter 3 – AT Commands, S-Registers, and Result Codes Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) 9 Chapter 2 – Installation and Cabling Step 1 – Attaching the Adapter to a Fixed Location The Serial-to-Bluetooth Adapter is design to be used on the desktop or to be pan...

Chapter 3 – AT Commands, S-Registers, and Result Codes Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) 10 Step 2 – Connect the Adapter to Your System Setup Example This example shows a BlueTooth Adapter setup at a fixed site and ready to communicate with the Bluetooth Adap...

Chapter 3 – AT Commands, S-Registers, and Result Codes Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) 11 Chapter 3 – AT Commands AT Command Reference Guide AT commands for the Serial-to-Bluetooth Adapter are published in a separate Reference Guide included on the product ...

Chapter 3 – AT Commands, S-Registers, and Result Codes Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) 12 Setting Parameters This section covers how to send AT commands at the PC connected to a BlueTooth Adapter to query and set parameters for Bluetooth communication. Exam...

Chapter 3 – AT Commands, S-Registers, and Result Codes Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) 13 Test Procedures Using AT Commands The following tesing procedures can be used with the MTS2BTA and the MTS2BTSMI. 1. Connect serial cable from computer to DB9 connecto...

Chapter 3 – AT Commands, S-Registers, and Result Codes Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) 14 Disabling Flow Control Using AT Commands Using terminal screen with flow control enabled, issue commands to turn off flow control. l . Sent : ATSW22,3,1,0 <cr_lf>...

Chapter 4 – Peripheral Devices Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) 15 Chapter 4 – Peripheral Devices Antenna Requirements Frequency Range 2.4-2.5 Ghz Impedance 50 ohm nominal VSWR <2.0:1 Gain 2 dBi Radiation Omni Polarization Vertical Wave Half Wave Dipole C...

Appendix A – Regulatory Compliance Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) 16 Appendix A – Regulator y Compliance Regulatory Compliance Statements EMC, Safety, and R&TTE Directive Compliance The CE mark is affixed to this product to confirm compliance with the ...

Appendix B – Multi-Tech Warranty Statement and Product Repair Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) 18 Appendix B – Multi-Tech Warrant y Statement and Product Repair Warranty Multi-Tech Systems, Inc., (hereafter “MTS”) warrants that its products will be free from...

Index Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A) 20 Index A AC power connections ......................................................10 Antenna Requirements......................................................15 Applications ...........................................