Msd 8228 Dodge Late Model Coil, 2 Pin Installation- User Manual
Msd 8228 Dodge Late Model Coil, 2 Pin Installation– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Figure 1 The MSD Blaster Dogde Coil.
IMPORTANT: Read instructions before attempting the installation.
Parts Included:
1 - Blaster Dodge Coil
WARNING: During installation, disconnect the battery cables. When disconnecting the battery,
always remove the Negative cable first and install it last.
The MSD Blaster Dodge Coil is designed as a replacement coil and produces a high voltage
spark. To get even more ignition performance, install an MSD Ignition Control. To ease the wiring
with an MSD Ignition, use the Universal Harness, PN 8873.
1. Disconnect the stock coil connector and the spark plug wire.
2. Remove the two mounting bolts and remove coil.
3. Install the new MSD Dodge Coil.
4. Plug in the wiring harness and connect the coil wire.
WARNING: High Voltage is present on the coil terminals. DO NOT touch the coil terminals or
tower when the engine is cranking or running.
PN 8228
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered
in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product
will help if there is ever a warranty issue with your product and helps the MSD R&D team create
new products that you ask for! Go to www.msdperformance.com/registration.
MSD Blaster Dodge Coil
PN 8228
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
