Msd 6012 GM LS2_7 Ignition Control, 06-On 58-Tooth Cra- User Manual
Msd 6012 GM LS2_7 Ignition Control, 06-On 58-Tooth Cra– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Figure 1 Wiring the MSD 6LS-2 Controller.
- Page 4 – Insert the installation CD into your PC.; Saves and Transfers; are two ways to save your files.
- Page 5 – PROGRAMMABLE FEATURES; Retard if activated.; MAP SENSOR SELECT; and 12580698 are 2-bar sensors that connect to the MSD harness.; TIMING LIMIT; with a default of 5°.
- Page 6 – REV LIMITS; RevMax; STEP RETARD; LS 1 Select when using factory style LS 1 or MSD; TIMING CURVE MODULES; Note: Any updates that are made using the PC software will; Figure 3 Timing Curve Modules.
- Page 7 – TECH NOTES
- Page 8 – M S D I G N I T I O N; Limited Warranty; for special or consequential damages.; Service; warranty. When returning MSD components for warranty service,; Proof of Purchase must be supplied for; All returns must have a Return Material Authorization (RMA) number; issued to them before
Parts Included
1 – Ignition Controller, PN 6012
1 – Pro-Data+ Software CD
1 – Harness
1 – Parts Bag
6 – Timing Modules
MSD 6LS-2 Ignition Controller for
Carbureted and EFI LS 2/LS 7 Engines
PN 6012
Optional Accessories
Hand Held Monitor, PN 7550
Factory EFI Harness, PN 88862
WARNING: During installation, disconnect the battery cables. When Disconnecting, always remove
the Negative cable first and install it last.
Note: Solid core spark plug wires or non-resistor spark plugs cannot be used with an MSD Ignition
Control.
CARBURETOR
The PN 6012 Ignition Controller is designed for GM LS 2/LS 7 based engines that have been retro-fit with
an intake manifold and carburetor. The Controller is supplied with a wiring harness that connects to the
factory connectors for a simple installation.
EFI
This Controller can also be used in stock, EFI applications, by using accessory Harness PN 88862. This
Harness allows the PN 6012 Controller to tap into the sensor signals without interrupting the OEM ECU.
The ECU and Fuel Injectors operate as normal while the PN 6012 controls the ignition and timing.
OPERATION
The MSD Controller offers several programmable features that allow rpm and timing adjustments. This can
be achieved through the supplied Pro-Data+ software via a PC or with the optional Hand Held Programmer,
PN 7550. Timing adjustments and selections can also be made with plug-in modules. Software installation,
operation and the programmable features of the Controller are explained in detail in this document. More
information can be found in the Pro-Data+ Software Help section.
MOUNTING
The Controller is designed to be mounted under the hood or on the firewall. Do not mount the unit near
exhaust. Four vibration mounts are supplied to mount the unit. Find a suitable location, confirm that all of
the wires reach their connections. Mark the mounting hole locations using the unit. Drill the holes with a
3/16" bit.
WIRING
All of the wiring, except three wires, are routed into factory style connectors to ensure an easy installation.
The wire descriptions follow in the chart on pages 2 and 3.
M S D I G N I T I O N
• W W W . M S D I G N I T I O N . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered
in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product
will help if there is ever a warranty issue with your product and helps the MSD R&D team create
new products that you ask for! Go to www.msdignition.com/registration.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INSTALLATION INSTRUCTIONS 3 M S D I G N I T I O N • W W W . M S D I G N I T I O N . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4 2-PIN CONNECTOR, ACCESSORIES PINK Pin-B Step Retard. When 12-volts are supplied, the Step Retard is activated. BLUE Pin-A Two-Step. When 12-volts ar...
4 INSTALLATION INSTRUCTIONS M S D I G N I T I O N • W W W . M S D I G N I T I O N . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4 PRO-DATA+ Installation of the Pro-Data+ Software 1. Insert the installation CD into your PC. 2. In Windows, click on Start then select Run. 3. In th...
INSTALLATION INSTRUCTIONS 5 M S D I G N I T I O N • W W W . M S D I G N I T I O N . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4 PROGRAMMABLE FEATURES The following explains the programmable features of the PN 6012 Controller. The features are listed in the same order shown on...
