Mitsubishi Electric DIS710E - Manual
Mitsubishi Electric DIS710E – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Page; This system is composed by the following components.; CONTENTS; Printer
- Page 3 – SAFETY PRECAUTIONS; PROTECTIVE MEASURES
- Page 4 – Use the cables provided; INSTALLATION LOCATIONS; The operating ambient temperature range is 5; FOR LONG OPERATING LIFE
- Page 5 – OTHER CAUTIONS
- Page 7 – REMOVING SCREW AND CUSHION; REMOVING SCREW; Protective cushion; Set the removed screw to the hole on the rear panel to keep.; REMOVING PROTECTIVE CUSHION; Press the OPEN button on the front panel.; INSTALLING PRINT PAPER AND INK SHEET; INSTALLATION PROCEDURE OF PRINT PAPER
- Page 8 – Right side; INCORRECT
- Page 9 – INSTALLING THE INK SHEET; Put the coloured roller of the ink sheet to the ink cassette.; On the; INSTALLING THE INK CASSEETTE; Eliminate any slack of the ink sheet.; SET THE PRINTING UNIT; Push the printing unit until it is locked into place.
- Page 10 – Make sure to turn off each device when connecting.; CABLE CONNECTION; To AC LINE
- Page 11 – There are two ways to set connection box.; SET UP CONNECTION BOX; FIXING TO THE PRINTER; Loosen three screws on the back of the printer.; PUTTING ON THE PRINTER
- Page 12 – You can take a picture twice, and choose the better one.; Set the face in the circle on the LCD.; The first image is memorized in the camera.; Guide sheet; TAKING THE FIRST PICTURE
- Page 13 – Press MEM button to transfer the image to the printer.; The image is memorized in the printer.; Press SHOT button to display the source image.; The second image is memorized in the camera.; nd image; When printing only one image (not multiple picture), skip the step
- Page 14 – CAMERA ADJUSTMENT; For Iris setting, see the table shown right.; Press SHOT button to take a picture.; IRIS adjustment mode is selected.; Press UP or DOWN button to select MANUAL.; SHOT
- Page 15 – camera; ADJUSTING THE COLOUR OF IMAGE (WHITE BALANCE); NOTE; White balance adjustment mode is selected.; Press UP or DOWN button to select LOCK.
- Page 16 – Press ZOOM button to finish the white balance setting menu.; FINE-ADJUSTING OF COLOUR; Press; or
- Page 17 – FEATURES AND FUNCTIONS; Press to take a picture.
- Page 19 – CHANGING SETTINGS
- Page 20 – SELECTING AUTO/MANUAL FOCUS; Press MENU button on the camera.
- Page 21 – THE BEST CONDITION FOR THIS SYSTEM; EFFECT OF BACK FLASH; • The back flash reduces the shadow behind the subject.
- Page 22 – BEFORE CALLING FOR SERVICE; THE RATIO OF FACE SIZES
- Page 24 – Name of Importers; 5, Boulevard des Bouvets - 92741 NANTERRE cedex; MITSUBISHI ELECTRIC CORPORATION
ID PHOTO SYSTEM
DIS710E
OPERATION MANUAL
OPEN
MEMORY
MONITOR
ALARM
SHEET
PAPER
S-VIDEO
REMOTE
POWER
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Page 1 SAFETY PRECAUTIONS ......................................................................................... 3 - 5 2 UNPACKING ................................................................................................................... 6 3 PRINTER SETUP .................................
3 1. SAFETY PRECAUTIONS In the interest of safety, please observe the following precautions: POWER REQUIREMENT This system is designed for operation on 220V-240V, 50Hz AC. Never connect to any outlet or power supplyhaving a different voltage or frequency. WARNNG: THIS APPARATUS MUST BE EARTHED.AVERT...
4 BE CAREFUL WITH THE PRINTING UNIT Don't move the unit while the printing unit is sliding out. This may cause injury.Be careful not to catch your finger in the printing unit while the printing unit is being retracted into the unit. CONNECTION CABLES Use the cables provided INSTALLATION LOCATIONS MA...
