Page 3 - PRECAUTIONS; RISK OF ELECTRIC SHOCK
CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS The lightning flash with arrowhead symbol, within an equilateral triangle, isintended to alert the user to the presence of uninsulated “dangerous voltage” withinthe product's enclosure that may be of sufficient magnitude to con...
Page 4 - Manufactured on : to be combined with date code YYYY-MM
WARNING: Install and use this appliance in accordance with the operation manual for safety and EMC(Electromagnetic Compatibility). If it is not installed and used in accordance with the operationmanual, it may cause interference to other equipment and/or other risk. To prevent fire or shock hazard, ...
Page 9 - CONTENTS
1 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS Contents .................................................................................... 1 Safety precautions .................................................................. 2-5 Special features .........................
Page 10 - PROTECTIVE MEASURES; SAFETY PRECAUTIONS
2 In the interest of safety, please observe the following precautions: POWER REQUIREMENT This product is designed to operate at 120/220-240V AC 50/60Hz in the U.S.A. and Canada, and220-240V AC 50/60Hz in Europe. Never connect to any outlet or power supply having a differentvoltage or frequency. WARN...
Page 11 - INSTALLATION LOCATIONS
3 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS UNPLUG THE POWER CORD DURING A LONG ABSENCE OR DURING ANELECTRICAL STORM Turn off the Main Power switch and unplug the power cord during a long absence or during anelectrical storm. WHEN TRANSPORTING THE UNIT When transportin...
Page 12 - FOR LONG OPERATING LIFE
4 PROTECT AGAINST DEW FORMATION When the unit is moved from a cold area into a warm area, moisture can condense inside the unitand prevent operation. Allow the temperature to stabilize before use.When print paper and ribbon cartridge are loaded, remove them.Replace the wet print paper and ribbon car...
Page 13 - TECHNICAL DESCRIPTION; OTHER CAUTIONS
5 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS TECHNICAL DESCRIPTION The supplier will make available on request such circuit diagrams, component part lists,descriptions, calibration instructions or other information which will assist the User’s appropriatelyqualified tec...
Page 14 - EASY LOADING AND UNLOADING; PRODUCT OUTLINE; SPECIAL FEATURES
6 SPECIAL FEATURES EASY LOADING AND UNLOADING You can load a ribbon cartridge just by inserting it into the ribbon cartridge loading slot (auto-loading), and can unload it by pressing the RIBBON EJECT button only (auto-ejecting). HIGH SPEED PRINTING Printing speed is approx. 16 seconds per sheet (in...
Page 15 - UNPACKING; NOTE
7 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS Take the unit out of the box by the following procedures. Be sure to check the accessories. 1 1 1 1 1 Open the box. 3 3 3 3 3 Carefully take the unit out of the box. Lift the printer from the box. 2 2 2 2 2 Remove the packing...
Page 16 - FRONT PANEL
8 1 1 1 1 1 PA P E R C A S S E T T E L O A D I N GSLOT/PRINT OUTLET Paper cassette loading area. Prints arereleased on the upper part of the papercassette. 2 2 2 2 2 STATUS DISPLAY The status display indicates currentprinter condition. 3 3 3 3 3 DIMMER BUTTON ( ) This button controls the brightness ...
Page 18 - REAR PANEL; AC LINE SOCKET
10 3 2 1 5 4 4 4 4 4 4 DIP SWITCHES Used to set the various functions of thisunit. See page 11. 5 5 5 5 5 USB CABLE STRAP Use the strap to hold the USB cable inplace. REAR PANEL 1 1 1 1 1 USB PORT ( ) Use this terminal to connect the unit to adevice equipped with USB interface suchas a personal comp...
Page 19 - SETTING DIP SWITCHES; CONNECTIONS; CONNECTION WITH USB INTERFACE
11 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS 2 2 2 2 2 CONNECTING WITH PC Connect this unit with a personal computer as following example. To USB port Personal computer Digital printer To USB port SETTING DIP SWITCHES 2 2 2 2 2 SETTING DIP SWITCHES All the switches are...
Page 20 - BEFORE OPERATION; LOADING PRINT PAPER
12 BEFORE OPERATION For S sizepaper For L sizepaper Tray (cover) Before printing,1. Turn on the power of this unit. 2. Load print paper into the paper cassette. 3. Load the paper cassette with print paper into the unit. 4. Load a ribbon cartridge to the unit. (page 14) 5. Install the printer driver....
Page 21 - Remove the protection sheet placed on the top of the paper.; Load the paper cassette in the printer.; CAUTION
13 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS R o l l e r, s e n s o r s(inside, bottom) Tab 4 4 4 4 4 Place the paper in the paper cassette together with theprotection sheet on the top. Make sure that the front corners of the stack are under the metaltabs. 5 5 5 5 5 Re...
Page 22 - LOADING RIBBON CARTRIDGE; Remove slack in the ink ribbon.
14 (backside of the ribbon cartridge) gear BEFORE OPERATION LOADING RIBBON CARTRIDGE Be sure to turn on the power of this unit before loading a ribbon cartridge. 1 1 1 1 1 Remove the used ribbon cartridge by pressing the RIBBONEJECT button. When you use the unit for the first time, this operation is...
Page 23 - USAGE AND STORAGE OF PAPER/INK RIBBON SET; BEFORE PRINTING; AFTER PRINTING; DISPOSAL OF PAPER/INK RIBBON SET
15 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS USAGE AND STORAGE OF PAPER/INK RIBBON SET 2 2 2 2 2 BEFORE PRINTING • Fingerprints or dust on the paper’s surface may degrade the print quality and causepaper jams. • When print paper is transferred from a cool place to a ho...
Page 24 - INSTALLING PRINTER DRIVER
16 INSTALLING PRINTER DRIVER Operating conditions Microsoft ® Windows ® 2000 and Windows XP ® Refer to the PRINTER DRIVER GUIDE in the CD-ROM for installing the printer driver. Windows 2000 and Windows XP are the registered trademarks of Microsoft Corporation in theU.S.A. and other countries. BEFORE...
Page 25 - SHOOTING; INDICATION ON THE STATUS DISPLAY & COUNTERMEASURES; TROUBLESHOOTING
17 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS If printing is not possible or error occurs during printing for some reason, the indicators on thefront panel will be lit.In this case, follow the procedure described below. Status indicator Causes/Countermeasures A ribbon c...
Page 26 - OVERCOMING PAPER JAMS
18 DATA RIBBON PAPER ALARM Access cover TROUBLESHOOTING OVERCOMING PAPER JAMS 1 1 1 1 1 Check the error display on the status indicator. When is displayed, go to step 2. 2 2 2 2 2 Eject the ribbon cartridge by pressing the RIBBON EJECTbutton. When the ribbon cartridge can not be ejected by pressing ...
Page 27 - BEFORE CALLING FOR SERVICE
19 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS 2 Use the troubleshooting chart to resolve problem in operation. If you are unable to resolve the problem, unplug the power cord and contact your dealer. Symptom Check and Remedy The power is not turned on. Is the power cord...
Page 28 - REPAIRING A TORN INK RIBBON; Install the repaired ribbon cartridge in the printer.
20 Cellophane tape Direction to turnthe gear TROUBLESHOOTING 1 1 1 1 1 Position the ribbon cartridge with the torn ink ribbon on a flat, clean surface. 2 2 2 2 2 Place a piece of transparent adhesive cellophane tape on the center of theink ribbon. REPAIRING A TORN INK RIBBON 3 3 3 3 3 Wind the gear ...
Page 29 - OTHERS; CLEANING
21 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS CLEANING Clean the thermal head using the cleaning kit for CP30 (option) to maintain stable printeroperation and extend the printer’s life. Please ask your dealer about the cleaning kit. CLEANING
Page 30 - SPECIFICATIONS
22 SPEC & OPTIONS SPECIFICATIONS Product name Digital color printer Model CP30DW Printing method Thermal dye sublimation3-color faces progressive printing (yellow, magenta and cyan) Print quality S size 1600 x 1200 dotsL size 2100 x 1600 dots Dot resolution 423 DPI DPI : Dots per Inch Number of ...
Page 31 - OPTIONS; CLEANING KIT FOR CP30
23 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS OPTIONS 2 2 2 2 2 PAPER/INK RIBBON SET Model Size No. of prints Usage Remarks CK30S S size 80 Color print 3 packs contained CK30L L size 50 Color print 4 packs contained 2 2 2 2 2 CLEANING KIT FOR CP30 SERVICE INFORMATION Be...
