Minolta 6100 - Manual
Minolta 6100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Converting your; magicolor; 100 DeskLaser printer to a magicolor 6100 Crown Print; Replacing the controller board.
- Page 6 – Refer to the appropriate chapter(s) of your; magicolor 6100 Print System Options; manual for instructions.; 0 Reinstall the controller board into the printer.
- Page 7 – 100 Crown Print System. Verify that
- Page 8 – Remove existing labels and apply the; dataplate label to the printer as shown in the following diagram:
- Page 9 – 100 DeskLaser from the list box, and then select
®
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Converting your magicolor 6100 DeskLaser printer to a magicolor 6100 Crown Print System involves two steps: 1 Replacing the controller board. 2 Applying the new product labels. ▲ Caution : It’s very important to protect the printer controller board from electrostatic damage while performing this con...
7 Insert each DIMM straight down into the DIMM connector until the latches snap into the locked position. When seated, the DIMM stands upright, firmly in place. If you can-not snap the DIMM into place, do not force it. Reposition it, making sure that the bottom of the DIMM is seated completely in th...
13 Check the startup page. After the printer warms up, a startup page similar to the one shown below prints. The startup page indicates that the printer has successfully been converted from a magicolor 6100 DeskLaser to a magicolor 6100 Crown Print System. Verify that the memory and options that wer...
